Used Gildemeister for sale (243)

Condition: used, Year of construction: 1989, Technical details: Gedpfx Adox Hggwomoil number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Year of construction: 2006, turning length: 365 mm, spindle motor power: 10 W, travel distance X-axis: 160 mm, SCHUNCK 160 mm chuck with jaws Full C-Axis 360.000 Driven Live tooling Part catcher Tooling package with 12 Tooling holders 3 x Live tooling AXIAL 3 x Live tooling RADIAL Collet device with inserts Cutting Hours 14.462 H Max. turning Ø: 380mm X-Axis: 160mm Z-Axis: 365mm Spindle bore: 56/42mm Speedrange: 6000Rpm Spindle power: 10kW ATC / revolver: 12 Gjdsx R Szhjpfx Admjil Speed live tools:4000Rpm Power live tools:5kW Chip conveyor: Yes Pinole taper: 4Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 3800mm Width: 1720mm Height: 1670mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, 4196 GM 25: Bar feeder year 2001 / GM 25 year 1991 3330 AS 25: Gsdpfjx S E Svox Admoil Bar feeder year 2001 / GM 25 year 1969, completely overhauled in 1992 4423 GM 26: Bar feeder year 1998 / GM 26 year 1998 4283 GM 26: Bar feeder year 2000 / GM 26 year 1995

Condition: used, Year of construction: 2011, turning diameter 0700 mm turning length 800 mm control 840D Siemens turret head 12 swing over bed 380 mm spindle turning speed - stepless 10- 5000 rpm spindle bore 67 mm feed - longitudinal/cross 20000 mm/min Gjdpfxjx Sy U Es Admjil rapid travel - longitudinal/face 30 m/min dimensions 5000 x 2800 x 2000 mm total power requirement 65 KVA weight of the machine ca. 7,5 t Machine has 6 live tooling positions

Condition: good (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-speed spindle range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X-/Z-axis: 10/10 m/min Turret: Number of tool positions: 12 Driven tool positions: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Gisdpfx Aex Sx Htjdmol Accessories / Special features: • CNC path control GRUNDIG EPL 2 with color monitor • Spindle orientation C-axis • 12-station turret, VDI 50, with 6 driven tools, SAUTER brand • Hydraulic 3-jaw chuck • Hydraulic tailstock • Chip conveyor • Extraction unit, LTA brand • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2006, Control unit MANUAL PLUS 4110 Giodex Tg T Repfx Admsl

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) Giedpjx Hgkcjfx Admel A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1987, turning diameter max. 400 mm Giodpfox Sy Urox Admjl turning length 1.000 mm control EPL 2 greates pass round over bed 400 mm Swing dia. over traverse guideway 225 mm travel -x axis 260 mm travel -z axis 1.040 mm turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 11 kW max. Torque 75 Nm spindle bore 72 mm chucking diameter 185 mm spindle head 140H5 spindle diameter in front bearing 100 mm number of toolpositions 12 pos. diameter of quill 80 mm quill stroke 100 mm taper of center MK 4 pressure max. 800 daN rapid power traverse in X-and Z direction 10 m/min Feed speed x: 5 m/min. Feed speed z: 5 m/min. Feed force x: 500 daN Feed force z: 800 daN total power requirement 29 kW weight of the machine ca. 4,0 t dimensions of the machine ca. 4,6 x 2,1 x 2,0 m CNC - Lathe GILDEMEISTER - NEF CT 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Gjdox Stlqepfx Admsil Additional equipment • Tool holders (as shown in pictures) will follow • Tailstock will follow

Condition: used, Year of construction: 2007, Technical details: turning diameter: 325 mm turning length: 600 mm total power requirement: 35 kW spindle drive: 25 kW spindle turning speed range: 5000 U/min speeds of tool: 4500 U/min rapid traverse X-axis: 60 m/min diverse toolholders: VDI 40 rapid traverse Z-axis: 45 m/min weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor Gedpfx Adevgb Epsmeil - collet clamping - part catcher *

Condition: used, Year of construction: 2006, Turning length 900 mm Distance between spindles 580 mm Max turning dia. 250 mm Spindle speeds (main spindle) 30-6000 rpm Spindle speeds (Sub spindle) 30-6000 rpm Spindle speeds on live tools 2000 rpm Spindle bore 65 mm Y-axis 670 mm Upper turret w/12 stations Lower turret w/12 stations Live tooling on both turrets - in all stations Controlled tail stock Automatic workpiece extraction Control: Gsdpfx Adex N A Hlemjil Siemens Sinumeric 840 D Equipped with: Hainbuch collet chuck on both spindles 2 pcs. 3-jaw chucks Chip conveyor Irco Profimat magazine bar feeder

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0031000270A,

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, DMG Gildemeister Lathe Type NEF 600 CNC DMG Siemens 840D Powerline Year 2008 Main Technical Specifications Machining Capacity: Max. turning diameter: 600 mm (over bed). Distance between centers: approx. 1,200 mm to 1,250 mm depending on configuration. Turning diameter over cross slide: 410 mm. Spindle: Giedpfex Ivz Tsx Admol Spindle speed: Up to 3,000 rpm. Spindle bore: 90 mm. Motor power (40/100% DC): 24 kW / 18 kW (certain variants up to 36.5 kW). Axis and Tooling: Turret: Typically 8 positions (VDI 40). Travel (X / Z): 320 mm / 1,250 mm. Rapid traverse: 15 m/min. Dimensions and Weight: Total weight: Approx. 5,000 kg (without chip conveyor). Approximate footprint: 3.6 x 2.1 x 1.9 m.

Condition: good (used), Year of construction: 1985, Ref. -No.: 10595 Manufacturer: GILDEMEISTER MAX MüLLER Gsdpfxsx Sw Naj Admsil Type: MD 6S Year of construction: 1985 Type of control: CNC Control: EPL 4 Storage location: Halberstadt Country of origin: Germany Tool holder type: 2 x VDI 50 Centre Distance: 1765 mm Spindle passage: 101 mm Swing diameter over bed: 720 mm Swing diameter over cross slide: 490 mm Lathe chuck diameter, max.: 400 mm Power Capacity: 50 kW Weight Of The Machine Ca.: 16 t Turning Speed Range: 10 - 2800 rpm Quill holder: MK 5 Further information: - Equipment - Powered tools - Tailstock - Automatic quill stroke - Chip conveyor - Automatic sliding safety doors - Hydraulic steady rest - 2 turrets

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Gisdpovr Eh Eefx Admjl Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Gsdpfjq T I Izex Admeil Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: used, Year of construction: 2005, Turning length 900 mm Distance between spindles 580 mm Max turning dia. 250 mm Spindle speeds (main spindle) 30-6000 rpm Spindle speeds (Sub spindle) 30-6000 rpm Spindle speeds on live tools 2000 rpm Spindle bore 65 mm Y-axis 670 mm Godpfxex N A Nte Admeil Upper turret w/12 stations Lower turret w/12 stations Live tooling on both turrets - in all stations Controlled tail stock Automatic workpiece extraction Control: Siemens Sinumeric 840 D Equipped with: Hainbuch collet chuck on both spindles Chip conveyor Irco Profimat magazine bar feeder

Condition: used, Year of construction: 2009, 3-axis CNC lathe Brand: GILDEMEISTER Model: CTX ALPHA 500 Year: 2009 Max swing diameter: 240 mm Max workpiece length: 500 mm Max bar diameter: 67 mm Max X-axis travel: 210 mm Max Z-axis travel: 525 mm CNC control: CNC Pilot 4290 Included equipment: Gisdpjx Ni D Dsfx Admsl 3-jaw hydraulic chuck C-axis: 360,000 positions 12-position powered VDI 30 turret Chip conveyor Tailstock Set of VDI 30 toolholders Oil mist extraction system Complete documentation CE compliant Price ex works (excluding VAT): on request* *Machine availability subject to prior sale. Technical details provided for information only, to be verified by the customer upon order.

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex-location: CNC lathe Gildemeister Type CT 60 Year of manufacture: 1992 CNC control: EPL 2 Turning diameter: 360 mm Turning length: 1000 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Travel X axis: 1100 mm Travel Z axis: 380 mm Chuck: 250 mm Spindle bore: 108 mm Spindle speeds: 16 – 3150 rpm Drive: 30 kW Turret: 12 positions Driven tools Rapid traverse: 10 m/min Tailstock: MK 5 Quill stroke: 180 mm Accessories: jaws Chip conveyor Weight: 6.5 t Price: EUR 5,500 – plus VAT, ex-location Giodpfx Asx Tq Dmsdmol

Condition: good (used), Year of construction: 1984, Ref. -No.: 10594 Manufacturer: DECKEL GILDEMEISTER Type: MD 3S Godpfxsx Sw I Ns Admeil Year of construction: 1984 Type of control: CNC Control: ELTRO MPULS Storage location: Halberstadt Country of origin: Germany Turning Diameter: 400 mm Turning Length: 600 mm Swing Diameter: 600 mm Spindle Bore: 73 mm

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Gisdpfjwyvc Usx Admjl Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Gsdjxtr Iwspfx Admsil Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, Year of construction: 2005, Turning length 900 mm Gijdpfx Adex N A Ngemel Distance between spindles 580 mm Max turning dia. 250 mm Spindle speeds (main spindle) 7000 rpm Spindle speeds (Sub spindle) 7000 rpm Spindle speeds on live tools 2000 rpm Spindle bore 65 mm Y-axis 670 mm Upper turret w/12 stations Lower turret w/12 stations Live tooling on both turrets - in all stations Controlled tail stock Automatic workpiece extraction Control: Siemens Sinumeric 840 D Equipped with: Hainbuch collet chuck on both spindles Chip conveyor Irco Profimat magazine bar feeder

Condition: excellent (used), CNC vertical lathe Gildemeister CTV 250 Working area: Chuck diameter: 250mm X-axis: 800mm Z-axis: 300m Spindle head: 170 h5 Spindle diameter in the front bearing: 120mm Gijdpovuqm Sefx Admel Spindle bore: 79mm C-axis Number of work stations: 12 Videos available!!

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Gisdpoxzmp Eofx Admsl Turning diam. : 100 mm Turning length : 580 mm In General: Year of manufacture:2007 Control system:Siemens 840 D Turning diameter:100 mm Turning length:approx. 580 mm Bar capacity:32 mm Main spindle: Technology:Motorised spindle Speed:8,000 rpm Torque max.:100 Nm Power max.:26 kW C-axis:0.001° Bar capacity:32 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Sub spindle: Technology:Motorised spindle Speed:8,000 rpm Max. torque:100 Nm. Max. power:26 kW C-axis:0.001° X-axis:145 mm Z-axis:380 mm Clamping cylinder:Partial hollow clamping cylinder Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:220 mm Y-axis:60 (+/- 30) mm Z-axis:320 mm Tool carrier II (X/Z): Technology:Tool turret :Number of stations. 12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:120 mm Z-axis:345 mm Equipment: Chip management:Chip conveyor Coolant supply:Internal coolant system Bar loader:Irco Breuning Parts removal:Parts gripper + indexing conveyor Tailstock:Stroke 250 mm, quill MK 3 Chuck:2x Hainbuch Spanntop Tool holder:Various driven and static holders