Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, TECHNICAL DETAILS Gjdpfex Ahgusx Aayeca Number of milling spindles: 1 pc. Number of controlled axes: 5 pcs. Type of milling table: Beam table MACHINE DETAILS Weight: 3,450 kg EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Gcsdpjxzfx Eofx Aaysa Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3275, Handling concept 2, consisting of Lift table, Section bridging by roller conveyor Vacuum arm for positioning material Pneumatically lowerable stop fences Push off device Dust extraction hood for protective boards Godsx Ap Akepfx Aayoca Dust extraction channel at outfeed from below Transport belt 4050 x 2250mm 14-position tool changer Simultaneous push off and infeed Table Length: 3100mm Table Width: 2250mm Thickness: 100mm X/Y: 96m/min Z: 20m/min 3 Vacuum pumps with a total vacuum capacity 900/1080m3/h 4 Pneumatically lowerable stops 9Kw main spindle – liquid cooled Aggregate interface main spindle c-axis Flex 5 interface for c-axis Ait Jet integrated in extraction hood 12 vertical drilling spindles, including quick-change system Grooving saw swivelling 90 degrees Tool Change Assistance Device Tool length Control PowerTouch with power control hardware CE Weeke Quality Pack Energy Saving Mode

Condition: excellent (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: AA2/0001518, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 300 mm, nominal power (apparent): 10 kVA, controller manufacturer: SCM, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,200 mm, number of spindles: 2, number of slots in tool magazine: 12, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, SCM Record RD 110NTTVN CNC Machining Centre, Series: AA2/000518 Year 2008. In very good condition. X=6m, Y=1.2m, Z=300m/m. Currently running software for staircase production. 12 Position Tool Changer with 1 Extra Head. Rail & Pod machine with 8 Rails. Can work in 2 Fields. Front Safety Mats, and Overhead Laser System. Fully tooled up with complete documentation. Overall size: 8m. x 2.4m. x 1850m/m (H) Weight : 5000kg. Gsdpex Ek Rkjfx Aayjca Can be viewed at: The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Video and Photos available on WhatsApp

Condition: like new (used), Year of construction: 2021, operating hours: 2 h, functionality: fully functional, machine/vehicle number: aggregat-nr.:%20BID-021297, travel distance X-axis: 120 mm, Benz Saw aggregate for homag cnc centre nmaxout (T6) = 15.000 min/-1 amax (T4) = 120 1/s2 Gcedpex Dzfmefx Aayoa 000WD042073222 Aggregat-Nr.: BID-021297 か 0,349 C2: 173,63 G6: 66,844 132,608 птакс. (16) = 15.000 mln/-1 amar (74)= 120 1/52 Very hardly used

Condition: good (used), Infotec 1008 Rotary CNC machine adjustable RPM, manual or auto, 3Ph Gcsdpfx Ajx Ai T Neaysa

Condition: ready for operation (used), Year of construction: 1999, Two Maka Machines: Year: 1999 · Machine No: 422 799 Key specifications Model: MAKA KPF 334R Control: BWO 900C CNC (integrated PC, ~1 MB memory) Working area: X = 1,000 mm, Y = 1,000 mm, Z = 300 mm (fixture height ~120 mm) A/B axes: A = 540°, B = ±100° (200° total) Rapid traverse: X/Y = 45 m/min, Z = 15 m/min, A/B = 10,000°/min Spindle: HSD high-speed spindle — 6.8 kW, 2,000–24,000 rpm, ceramic bearings, air-cooled (nominal power from 12,000 rpm) Tooling: SK30 spindle taper; 10-place drum tool magazine (tools up to Ø60 mm, length ≈130 mm depending on diameter) Table: Aluminium work table ~1,000 × 1,000 mm (T-slots / grid) Vacuum: Vacuum clamping system (vacuum pump spec commonly listed as ~54 m³/h on similar units) Lube: Central automatic lubrication system Electrical: 400 V, 50 Hz (verify on site) MAKA KPF 334 RT – 5-Axis CNC Machining Centre Year: 1999 · Machine No: 422 799 Key Specifications – MAKA KPF 334 RT Working travel: X ≈ 2,750 mm · Y ≈ 2,400 mm · Z ≈ 700 mm Gcodsxwux Tspfx Aayja A-axis rotation: ~540° · B-axis swivel: ~200° Rapid traverse: X/Y ~40 m/min · Z ~15 m/min · A/B ~10,000°/min Dual work tables: ~1,000 × 1,000 mm each (coupleable) Control system: BWO 900 / BWO 900C CNC Spindle: High-speed milling spindle (eg ~27,000 rpm capacity) Tool magazine: Multi-station drum (tools up to Ø60 mm / L approx 130 mm, check actual) Vacuum clamping system & automatic central lubrication Electric: 400 V / 50 Hz (buyer to verify local connection)

Condition: ready for operation (used), 3.1x2.1 Nesting table , unloading table 4 axes 2 additional aggregates for door processing and low level drill on the nesting table , fully serviced by Felder UK. 3 vacuum generators Becker , label and nesting software. optional paramentric production software. low hours. Gcsdpfx Aox Dra Ieaysa

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,717 h, functionality: fully functional, machine/vehicle number: 904B0018, table width: 3,500 mm, table length: 14,400 mm, saw blade diameter: 1,000 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Maximum saw blade diameter: 1,000 mm Gsdpfx Aox Hg Stsayeca C1: 540° B1: 250° C2: 540° B2: 90° Table length: 14,400 mm Table width: 3,500 mm X-axis maximum travel: 5,000 mm Y-axis maximum travel: 15,870 mm Z-axis maximum travel: 1,000 mm MACHINE DETAILS Number of milling spindles: 1 Number of controlled axes: 2 5-axis unit power: 12 kW Operating hours: 1,717 h Main motor power: 55 kW Voltage: 400 V Current consumption: 130 A Power: 65 kW Transport dimensions (L x W x H): 40,000 mm x 2,400 mm x 2,700 mm EQUIPMENT Saw blade unit with flange connection Milling unit with tool changer Documentation CE marking

Condition: excellent (used), Year of construction: 2004, functionality: not functional, machine/vehicle number: AA1/013950, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 300 mm, nominal power (apparent): 10 kVA, controller manufacturer: SCM, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,200 mm, number of spindles: 3, number of slots in tool magazine: 10, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, SCM Record 132 TVN CNC Machine Centre in very good condition. Fully tooled up and currently running software for staircase production. Gcjdpjx Ekxzsfx Aayoa Rail and Pod Machine with 8 Rails. 10 Position Tool Changer with secondary head and Saw Unit. Can work in 2 fields, Front Safety Mats, Overhead Laser system. Full documentation available. Over all dimensions: 8m. x 2.4m. x 1850m/m (H) Weight About 6000kg. Ready packed for shipment. Can be viewed at The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Photos and Video available on WhatsApp

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Working area X: 3,740 mm Working area Y: 1,570 mm Working area Z: 350 mm 4th axis: Yes 5th axis: 5-axis spindle Tool changer positions: 34 Vertical drilling spindles: 12 Machine table: Console table Table positioning automation: Yes Special workpiece clamping system: For frames Software: FORMAT 4 WOOD FLASH, TPA ALBATROS Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: approx. end of January 202 Gcedpfxex Hllxo Aaysa Storage location: NRW

Condition: used, machine/vehicle number: 008277, X axis working area: 5680 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Gjdpjx A Hgmsfx Aayjca Total number of drilling spindles: 21 Total number of tool changer positions: 24

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT K2 Numerically controlled machining center ROVER A 3.40 FT K2 Working fields: X = 3685 mm; Y =1290 mm; Z = 160 mm Gedpjx Afvtjfx Aayoca The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum Pump 300 m3/h 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowingunit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with mats (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, TF 100/20 Gcedpfox Ha Rpjx Aayea - Year of manufacture: 2017 - Front and rear table - Workpiece height 60mm, maximum workpiece length unlimited - Maximum workpiece width 1000mm, minimum width 80mm - Traverse speed 0-25m/min - Air tables in the work area - 6-position tool changer - Ball screw and linear guides - DXF file import - Milling unit - Spindle speed 1000 to 18000 rpm - 3.3 kW - Drilling unit with 16 drills for 5-sided machining - Grooving saw unit - Weight: 1380kg - 400 Volts - 15.8 kW

Condition: used, Year of construction: 2006, Empty weight: 4.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-05-25 Gjdsx Hfikopfx Aayjca - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat - Vacuum pump present: Yes - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor, Manual control - Table length [mm]: 3050 - Table width [mm]: 1240 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2008, 5-Axis CNC Machining Center Used Machine Year of manufacture: 2008 Condition: Currently still in production Equipment and Technical Data: CNC Control: Siemens 840 D Max. travel of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ±90 degrees C = ±270 degrees HSD milling unit with 10 kW, liquid-cooled Infinitely variable spindle speed up to 24,000 rpm Permanent grease lubrication Tool holder: HSK 63F 1 multi-spindle boring unit with pneumatic advance stroke, mounted to the milling unit 16 individually selectable vertical drilling spindles 1 horizontal twin drilling spindle in X-direction and 1 in Y-direction Drill holders: 10 mm diameter each Note: Workpieces that can be processed with the boring unit: 900 mm with X/Y reference spindle Milling unit and boring unit with extraction connections: 200 mm each, each with pneumatically operated shut-off valve, combined discharge for customer-side dust extraction system, diameter 300 mm Tool changer: 1 drum tool magazine for 5-axis milling unit, 20 positions for tool diameters up to 90 mm or max. 160 mm if sorted arrangement, max. tool length 160 mm One saw blade up to max. 300 mm diameter can be stored and exchanged, but will occupy 3 magazine positions Special tool lengths up to max. 180 mm possible with corresponding restriction of the working area. Max. tool weight: 6 kg (including HSK holder) Total weight in magazine: approx. 60 kg Magazine arranged at the aggregate exit position Machine table: 8 support rails, manually adjustable along the length of the machine, each with 1 retractable workpiece stop, fixed towards the operator Division of the table surface into two clamping zones, each station: - 1 length stop, pneumatically raisable and lowerable - 2 pneumatically raisable and lowerable slide rails - 1 vacuum clamping circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with 250-liter intermediate tank 16 vacuum suction cups, 110 mm diameter Suction cup set for stair manufacturing incl. touch valve 1 clamping device for posts/bends Incl. chip conveyor Incl. NC-Hops 5 WOP system Incl. bumper safety device at the front and fencing at the sides and rear Centralized lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald Gjdpjx Enqzofx Aayjca

Condition: used, Year of construction: 2014, operating hours: 11,517 h, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 Godpfox E Uk Ujx Aaysca - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Functionally tested Equipment and technical data: Travel distances: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling aggregate: - 6 kW, water-cooled - Tool holder HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, lateral Drilling head: - 9 vertical drilling spindles at 32 mm pitch Gcedpfxex Enqbo Aayoa - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Grooving saw: in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: as agreed Storage location: Lower Saxony

Condition: used, Year of construction: 2009, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Details: - └ Description: Excluding tools - Year: 2009 Gjdpfox Dil Ijx Aaysca - Documentation available: Yes - CE certificate present: No - Serial number: 113253 - Number of milling spindles [pcs.]: 1 - Material clamp system: Pneumatic - Drilling unit present: Yes - System/software: - Safety feature: Door interlock switches, Enclosed fence - CNC options: Unloading system, Loading system - CNC documentation available: USB stick - Voltage [V]: 400 - Current consumption [A]: 63 - Fuse [A]: 80 - Power [kW]: 32.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, CNC Machining Center Biesse skill 15 36 G FT Year of construction 2011 Machine no. 52549 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 3765 mm Y axis 1560 mm Z axis 324 mm Inclusive - 2x vacuum pump, Busch Mink MM1322 AV; 360m³/h - Safety mats Spindle bearings need to be replaced, sounds bad. Gcodpfx Aaownh Ifeysa Disassembled for transport on normal trailer; 6000x2400x2400mm; Own weight 2500kg - Year: 2011 - Documentation available: No - CE certificate present: No - Drilling unit present: No - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Brand: Busch Mink - └ Type: MM1322AV - └ Capacity [m³/h]: 360 - Working range X [mm]: 3765 - Working range Y [mm]: 1560 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, Price: On request Godpjxr Evlefx Aayoca What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Label machine, Loading system, Unloading system Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2020, total height: 2,500 mm, total length: 5,000 mm, total width: 2,400 mm, Empty weight: 2.500 kg CNC machining centre SCM Morbidelli N100 12 A Brand SCM Type Morbidelli N100 12 A Year of construction 2020 Serial number AM00002846 Machining table dimensions 2486x1255 mm (LxW) Groove pattern 40 mm distance Distance between holes vacuum cups 120 mm Equipped with 3 reference gauges Table has 1 vacuum field Table working range X axis 2486 mm Y axis 1255 mm Z-axis 150 mm Stroke of the units X axis 3120 mm Y axis 1685 mm Z axis 250 mm Movement of the axes  Maximum vectorial speed in rapid traverse XY axis 35 m/min Stroke of Z axis 250 mm Panel pass 150 mm Hiteco milling unit Motor power 5.5 kW (7.5 HP) Tool holder HSK-63-F Milling spindle speed 1500-24000 rpm Tool changer 8 positions Central exhaust connection 250 mm Control unit Windows EmbeddedStandard 7 64 bit  21.5 LCD touch screen XILOG-MAESTRO software package  Including vacuum pump Capacity 250 m3/h Power 5.5 kW Max. vacuum 0.9 bar Noise level 81 db (A) Total dimensions 5000x3000x2500 (LxWxH) Total weight 2500 KG Gcsdpfx Aaowwa Hleyoa - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AM00002846 - Transport dimensions: 5000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2001, Empty weight: 5.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AL/6222 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 18 Godpfxoxbzg Es Aayeca - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 14 - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 26.0 - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, CNC machining centre SCM Morbidelli M-600 Gsdpfx Aaewnhccjyoca 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: AA2/002032 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 24 - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Capacity [m³/h]: 250 - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, Price: On request CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Year: 2014 Godswnhanepfx Aaysca - Documentation available: Yes - CE certificate present: No - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets