English
German German German English English French French Spanish Spanish Italian Polish Russian Belarusian Dutch Ukrainian Estonian Turkish English English English Czech Danish Finnish Swedish Norwegian Bokmål Maltese Luxembourgish Greek Lithuanian Latvian Kazakh Icelandic Portuguese Portuguese Spanish Spanish Hungarian Slovak Romanian Romanian Slovenian Serbian Serbian Albanian Croatian Bulgarian Macedonian Bosnian Hebrew Arabic Hindi English Indonesian Korean Japanese Thai Malay Vietnamese Chinese Chinese Persian Bengali Pashto Urdu

Bof for sale

Identified location: Ashburn (US) (Edit)
table length:397 mm table width:300 mm x-axis:300 mm y-axis:250 mm z-axis:250 mm workpiece weight:200 kg T-slots:3 T-slot - distance:100 mm T-slot - width:12 mm connected load:3 kVA current capacity:50 / 60 Hz weight of the machine ca.:1,0 t dimensions of the machine ca.:3,0 x 1,6 x 2,5 m Jvcnpu Dielectric: Work basin: 180 x 620 x 420 mm Throughput: 75 l Level min / max: 90/205 mm Frontal pelvic opening: 650 mm Container: Dimensions: 530 x 975 x 750 mm Throughput: 200 l more
  Machine working. Exchange due to new purchase. Dismounted and ready to be delivered.   Berjuom0qy X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted charac... more
Wire EDM machine AGIE CHARMILLES Robofil 510P for the machining of large workpieces. the lower head of the wire guide, incl. wire drawing rollers and bearings, was renewed in 2017. control:CNC inflation IBM system with hard disk and data interface RS 232 / RS 42214" screen and electronic hand control Technical data: Travel range X 700 mm, Y 400 mm, Z 400 mmU axis 700 mmV axis 400 mm Taper angle/height /- 30° / 400 mmWire guides 0.25 mm Generator type ISOPULS double sourceTable:Workpiece dimensio... more
7
Kaiserslautern, Germany Germany
dealership location
6526 km
1996
ready for operation (used)
General Data Measurements width 3040 mm Measurements depth 2850 mm Measurements height 3090 mm Machine weight 5080 kg Control Unit Brand Charmilles Main Drive Working current 64/128 A Movement X-Axis Movement 450 mm Y-Axis Movement 320 mm Z-Axis Movement 410 mm Workpiece Workpiece X 1100 mm Workpiece Y 780 mm Workpiece Z 325 mm Bfuqi7nefe Workpiece weight 900 kg Media Main electronic connection 380/400 V This CHARMILLES Roboform 4000 Erosion Machine was built 1996 in Switzerland. It has a ... more
12 kW reconditioned motor (by Homag works) M29e7wcl 12000 - 18000 r/min Working hours since recond: 0 more
AGIE CHARMILLES Robofil 690 wire EDM machine for machining large and heavy workpieces. Control: CNC Charmilles technology with Windows NT system and Ethernet data interface12" TFT screen and electronic hand control Technical data: Travel range X 800 mm, Y 600 mm, Z 400 mmU axis 60 mmV axis 60 mm Taper angle/height /- 15° / 110 mm Wire guides 0.25 mm Generator type ISOPULS dual source Table:Workpiece dimensions max. 1,300 x 910 Workpiece height max. 400 mm (flooded)Workpiece weight max. 2.300 kgD... more

New machines via email!

Yes, send news from this list to my inbox!
Stay updated!
You can create a label.
How often do you want to be notified about new listings?
15
Kaiserslautern, Germany Germany
dealership location
6526 km
1996
ready for operation (used)
General Data Measurements width 3300 mm Measurements depth 3330 mm Measurements height 2400 mm Machine weight 3340 kg Control Unit Brand Charmilles Main Drive Wire diameter 0.1-0.3 mm Movement X-Axis Movement 450 mm Y-Axis Movement 320 mm Z-Axis Movement 162 mm Workpiece Workpiece X 1270 mm Workpiece Y 800 mm Bfet2hpg2e Workpiece Z 435 mm Workpiece weight 800 kg Table Outer length 600 mm Outer width 420 mm Media Main electronic connection 400 V Additional Equipment Auto Wire Feed Dielectr... more
In good technical condition and fully functional. Year of production 2000. Producer: Agie Charmiles. Bezrtazv8o Table clamping surface: 400 x 300 x 200 mm. Machine weight: 950 kg. more
MACHINE "LIKE NEW" COMING FROM A BIG BRAND OF THE SWISS WATCH MAKER INDUSTRY. Beotsnle29 LESS THAN 10'000 WORKING HOURS. more
Charmilles Roboform31Traverse paths: 350 x 250 x 300 mmTable dimensions: 500 x 400 mmMax. Workpiece weight: 500 kgBuilt in 1996 Equipment: 4-way changer for electrode quill with Macro 3R chuckProgrammable tank height from working tank Table chuck: Maxi chuck System 3R Fire extinguishing system Power BauerTransor filter system with automatically backwashable filter elements (does not consume any filter elements) C0nstup more
Bearbeitungsmaß X=3000 Y=1200 mm 12 Fach Wechsler Bohrkopf 17 Spindeln Hauptspindel 12kW Wasserkegühlt Werkzeuglänge max. 200mm Verleimteil bis 60mm CNC- Programmsystem WOODWOP KURZBESCHREIBUNG DER GRUNDAUSRÜSTUNG: - Konsolen-Aufspanntisch "K" - HOMATIC-Steuerung mit Windows-Bedienung - Hauptspindel 12 kW - Tellerwechsler 12-fach - Geniale Schnittstelle zum Einwechseln von Bearbeitungsaggregaten und Verleimaggregat. Integrierte Pneumatik-/Elektrik-/Elektronik- Versorgung und Antrieb C-Achse. -... more
15
Kaiserslautern, Germany Germany
dealership location
6526 km
1995
ready for operation (used)
General Data Measurements width 2500 mm Measurements depth 2500 mm Measurements height 2290 mm Machine weight 2200 kg Control Unit Brand Charmilles Model Charmilles CNC Main Drive Wire diameter 0.1 to 0.3 mm Movement X-Axis Movement 320 mm Y-Axis Movement 220 mm Z-Axis Movement 116 mm Workpiece Workpiece X 990 mm Workpiece Y 505 mm Workpiece Z 150 mm Workpiece weight 500 kg Table Outer length 600 mm Outer width 420 mm Media Main electronic connection 400 V Power consumption 12 kVA Additio... more
Travel axes: 550 x 350 x 400 mm [ X x Y x Z ] max. workpiece size X: 1200 mm max. workpiece size Y: 700 mm Cuo0ymd max. workpiece size Z: 400 mm max. workpiece weight: 1500 kg table size X: 900 mm table size Y: 600 mm with AWF ( Automatic Wire Feeding ) U / V axis: 550 x 350 mm submerged Work light E-Connect unit for coils 16-25 kg more
CNC -EDM Machine , Travel X 350 mm, Y 250 mm, Z 300 mm. Be3b29rf20 With high Inertia C-axis, 64 Amp Generator with Microfin. Droptank, Full 3D control with CT Expert, 16-position ATC, System-3R chuck, Machining hours 15463, software version MK VI-9B1, LCD colourscreen 12" and 1 x Floppy drive 3,5", from first owner. more
table length: 560 mm Table width: 380 mm ampere: workpiece weight: max:350 kg x-axis: 350 mm y-axis: 250 mm z-axis: 300 mm generator - rated current: 64 A Yslu3wot workpiece height: 200 mm electrics - voltage/frequency: 380/50 V/Hz spindle nose: (ohne Futter) 540 mm total power requirement: 9,5 kW weight of the machine ca.: 2,4 t space requirements of the machine approx.: 2,05 x 3,3 x 2,50 BxLxH m SPARK EROSION CAVITY SINKING MACHINE DOCUMENTATION available - C-type with fixed table - Cont... more
  Chuck type: EROWA Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Gcxmdjv Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to chang... more
EDM of Charmilles 330F Year of construction: 1999 Idktp7v2q The machine is fully functional and can be seen under power. more
max. workpiece length 4500 mm profile spindle 1 Stück main drive 12 kW HOMAG machining center GENIUS BOF 411/45 / PM ----- Electronically controlled milling and drilling center for commission wise manufacture of furniture parts, solid wood parts and Devices, [...] Windows, doors, stairs. With 1 main spindle. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: • Console worktable "K". • HOMATIC control PC 83 with Windows operation. • Main spindle 12 kW. • Plate changer 18x. • Ingenious interface for ed... more
- Max. part dimensions: 1200 x 700 x 400[mm]- Max. part weight: 1500[kg]- Table dimensions: 900 x 600[mm]- X,Y,Z strokes: 550 x 350 x 400[mm]- U,V strokes: 550 x 350[mm]- Wire diameter: 0.1 to 0.33[mm]- Max. draft 30[°]- Three-phase supply voltage: 400[V]- Dimensions: 2600 x 2810 x 2240[mm]- Weight: 2850[kg]Sparking hours: 16,000 Ketxebkh more
7
W1D 5EU Brebners, United Kingdom United Kingdom
dealership location
5928 km
ready for operation (used)
Condition Used B8lcxnww This listing is for a Heraeus Labofuge 400 1997 Function line more
A very well preserved eroding machine of the brand Charmilles TechnologiesThe machine has a lot of documentation and is in a very good condition. Beslqjuhc more
Machine working. Geometry of the table checked. Indicates 17'000 working hours (..Original?) Bfrttjiucf more
• Travels X628 Y398 U +/- 48 V +/- 48 Z158 Bftvluhbc0 • workpiece weight max. 800 kg • Automatic re-threading •Water bath • Twin Wire • Operating hours 45000 hrs • Bj. 2002 more
Charmilles Robofil 240 eroding machine Bebndnu8g more
WORKING RANGE -WIRE CUTTING- - X-axis traverse 400 mm - Y-axis traverse 250 mm - z-axis travel (vertical) 200 mm ----- - table surface (left-right) 850 mm - table surface (front-back) 500 mm workpiece height 200 mm - workpiece load (max) 500 kg WIRE SYSTEM - wire diameter (min) 0,25 mm - wire diameter (max) 0,30 mm ELECTRICAL SPECIFICATIONS - mains power supply 10 kVA - mains voltage 380 V Dimensions (HxWxD) 2130 x1800 x 1600 mm weight of the machine ca. 2,5 t Machine is optical a... more
KOMMTEK Roboflail ONEFunkferngesteuerung Großflächenmäher / BöschungsmäherThis KOMMTEK Roboflail ONE is first commissioned in 2013, has 1,977 operating hours according to the meter and is in a good overall condition with the usual signs of use and wear, current EIA is at 40,000 €! inspection / test drive gladly possible - shipping costs nationwide (except islands) 200 € - differential tax according to §25a UStG. - no reportable VAT Eeexbnl more
Course : X : 250mm – Y: 160 mm – Z : 150 mm Bfsixqernc Dimension table : 700 x 300 x 150 mm more
6
Rietberg, Germany Germany
dealership location
6460 km
2000
ready for operation (used)
machine CNC-machine manufacturer Homag type BOF 41/45/K part Id-no. 2254337 year of construction 2000 table length X 4500 mm table width Y 1150 mm Ebflfib working height Z 60 mm C-axis 360 degrees yes kind of table console drilling spindle vertical 17 piece main spindle 12 kW tool entry HSK 63 tool changer 12 box positioning laser yes cont... more
Travels X320 Y220 Z320 C 360 ° Operating hours 22300 hours Muptb8 Year 1992 more
Subfamily: Machining head 5-axis Type: Grinding Working range axes X: 6000 mm Working range axes Y: 1600 mm Stroke axis Z: 800 mm Max. Panel passage: 60 mm Movement speed axis X: 80 m/min Movement speed axis Y: 80 m/min Movement speed axis Z: 30 m/min No. of working areas: 2 Working plane: yes Working plane: with rods with suction elements No. of working areas: 2 Working plane: yes Working plane: with rods with suction elements No. of working areas: 2 Working plane: yes Working plane: with rods ... more
CNC wire EDM (X: 450 mm) SMA-REF-6511 Type: wire EDM machines Manufacturer: Charmilles Model: Robofil 400 Year: unknown Control: Charmilles Working range: X: 450 mm Y: 320 mm Z: 175 mm U: +/- 50 mm V: +/- 50 mm Workpiece dimensions: 800 x 560mm Workpiece weight: max. 500 kg Condition: in use ready for your test lots of spares, chucks, coolant unit incl. Location: Southern Germany Availability: on demand Terms of delivery: ex works free on truck Bfoinblbcp Terms of payment: 100% before disman... more
Travel axes: 350 x 220 x 220 mm [ X x Y x Z ] max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg Dwkkd3 table size X: 680 mm table size Y: 450 mm with AWF ( Automatic Wire Feeding ) U / V axis: 350 x 220 mm submerged Clean Cut generator coil holder for 16 kg more
Charmilles Roboform 35P, year of construction 2001, machining hours 21502, 15" color screen, 3,5" floppy drive, Be3g93x3fa Travel X = 350 mm, Y = 250 mm, Z = 300 mm, C-axis, Erowa ITS spindle chuck, 16 positions ATC, 64 Ampère generator with Microfin, Total Walther Fire-extinquisher and droptank more
Machine come with equipement. Bfjkij3sl0 more
traverse X400 Y250 U400 V250 Z200 Workpiece dimensions max. 850 x 500 x 200 machine weight 2190 Kg Workpiece weight max 500 Kg Automatic re-threading Work Hour 7104 Std Wwtvg Construction year 2002 more
14
Subfamily: Machining head 5-axis Type: Grinding Working range axes X: 6000 mm Working range axes Y: 1640 mm Movement speed axis X: 60 m/min Movement speed axis Y: 60 m/min Movement speed axis Z: 30 m/min No. of working ranges: 2 Working plane: yes Working plane: with bars with suction elements No. of suction elements: with bars with suction elements: with suction elements: with suction elements: with suction elements: with suction elements: with suction elements: with suction elements: with suct... more
6
Sesto Calende, Italy Italy
6769 km
2010
excellent (used)
Type: Cnc working center Brand: Homag Year: 2010 Control: WOODWOP Working table type: bars Working dimensions X mm: 4175 Working dimensions Y mm: 1550 Bbx0xexxk Working dimensions Z mm: 300 5 axis router: Yes Boring head with n° spindles: 18 N° vertical spindles X: 12 N° vertical spindles Y: 6 Automatic tools changer N positions: 24 positions, on the machine rear side Cones types: HSK F63 Horizontal cross boring aggregate: Yes Safety system with carpet: YES Vacuum pump: Yes more
Travel axes: 550 x 350 x 400 mm [ X x Y x Z ] Bfjqqjbrmz max. workpiece size X: 1200 mm max. workpiece size Y: 700 mm max. workpiece size Z: 400 mm max. workpiece weight: 1500 kg table size X: 900 mm table size Y: 600 mm with AWF ( Automatic Wire Feeding ) U / V axis: 550 mm x 350 mm submerged more
BOFA housing stainless steel with a new 10x filter bag F6 Typ ILF 600 dimensions : 63, 61, 73 cm air inlet / outlet 125mm material: 1,5m tube Ø125mm with 2 connnecting sleeve presure pipe for BOFA suction AD500/1000/1500IQ list price :906,00€ -20% 9gdnz2f08 subject to prior sale, delivery: EXW, collection possile more
Charmilles Robofil 640 CC Year of manufacturing 2007 Millenium Control Axis travel (X / Y / Z): 800 x 550 x 510 mm Axis travel (U / V): 800 x 550 mm Max. taper: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Max. workpiece dimensions: 1300 x 1000 x 510 mm workpiece weight: 3000 kg Max. cutting speed: 400 mm²/min Min. finishing: 0,2 µm Ra Bfba2hyjji Available wire diameters: 0,10 to 0,30 mm Incl. big spool option (25 kg, K250) Machine dimensions: 2550 x 2750 x 2... more
CHARMILLES ROBOFORM 51 Year of construction 1998 Processing time 40000 h Generator 64A Dimensions (including dielectric tank) p 2892 x 2580 x 2400 mm Work pool tweeter p 465 x 1220 x 795 mm Capacity 475 l Filling height 440 mm Total weight including dielectric tank and Cabinet 4000 kg Nk0ut Rotation rotation changers 24fach Clamping system Erowa ITS Traverse paths x 600 mm Y 400mm Z 450mm C 360 degrees Table size 750x500mm Workpiece weight of Max 1000 kg Dielektikumtank capacity ... more
ED-SINKING MACHINE "CHARMILLES" ROBOFORM 100 Ctmr2xjk more
Travel axes: 350 x 250 x 300 mm [ X x Y x Z ] Noapb table size X: 590 mm table size Y: 530 mm max. workpiece size X: 300 mm max. workpiece size Y: 500 mm max. workpiece size Z: 400 mm max. workpiece weight: 500 kg electrode changer: 5 - time more
Fume extractor AD-Oracle IQ by Bofa - new : options: in stainless steel, , tube set, VOC, filter change signal, start / stop about 24 V signal - the compact unit offers a wide range of applications - the filters stand out due to a long life-time - both filter cassettes separate particles, fine dust and gas - the airflow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) Typical applications : laser marking laser engraving laser cutting laser welding soldering fumes EXW Our te... more

New machines via email!

Yes, send news from this list to my inbox!
Stay updated!
You can create a label.
How often do you want to be notified about new listings?
BOF
SELL IMMEDIATELY

with the worldwide market leader from 0,99 EUR per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately

Machineseeker.ie is official sponsor of:
Flag gb
+44 (0) 20 806 810 84
Flag de
+49 (0) 201 857 86 10
Flag nl
+49 (0) 201 857 86 180
Flag pl
+48 (0) 223 076 958
Flag it
+39 800 12 58 38
Flag es
+34 911 433 456
Flag fr
+33 9 80 09 19 36
Flag us
+1 312 94 04 581