CNC Horizontal Machine centers Weinig Conturex C114 2009

Weinig Conturex C114

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm Itjdpewunwysfx Ag Ueb 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986. Itedpfjmgc I Nsx Ag Ujb

Condition: good (used), Year of construction: 2019, Weinig Conturex Greenline Plus CNC Window production machine Description; Year of construction: 2019 Processing workpiece length: 4500 mm Automatic part check on infeed Clamp adjustment in connection with rebate clamps Main motor 30 kW indirect driven Unispindle for mortizing, drilling and special machining Tool changer 35 and 17 positions HSK 63F tool holder Special software for machine data and company data registration In/output buffer length: 2000/ 2500 mm Optional tool set/ plan available Full description on request Itodpfx Agow N Nixj Uob (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm Itodpfxet Ea Tfj Ag Ueb - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fully automatic electronic control with program selector switch RINSE-GLUE-GLUE/DRIVE - Dowel feed via electronic vibrating conveyor with potentiometer for stepless adjustment of the dowel feed rate - Closed glue system with 6 bar glue pressure via glue nozzle - GLUE/WATER selector switch for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - 1 stainless steel container for 7.5 kg glue, as well as 1 stainless steel container for 7.5 l water for rinsing/cleaning incl. 1 gun for dowels Ø 8 mm Itsdpfxsv Aubpj Ag Ujb Dowel length 25 - 40 mm Glue/dowel driving tool completely overhauled and no longer used

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Itodpfjqu N U Djx Ag Ueb Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar

Year of construction: 2010, condition: excellent (used), The QUADRA L1 consists of an automatic loading magazine and a gripper feed system for profile lengths up to 7,500 mm. The feed unit transports the profile bar to the machining unit, which is equipped with 6 spindle motors for drilling and milling operations all around the profile. The sawing module is 3-axis and fitted with a 600 mm diameter saw blade. The finished machined part is transported from the machining area to the unloading table by a discharge unit, where it is conveyed to the retrieval position via powered belts. The machining area is fully enclosed and can optionally be fitted with sound-absorbing mats. Automatic loading magazine with a maximum capacity of 15 profiles at a width of 100 mm. The profiles are transported to the gripper position via belt conveyor. Automatic 3-axis CNC feed unit. Based on profile data, the unit positions itself according to length and profile cross section at the loading position to feed the bar for processing. Itjdjxvbynjpfx Ag Usb The gripper clamps the profile bar at a predefined position specified in the technical drawing. A 600 mm saw blade allows a wide cutting range thanks to its 3-axis travel capability. Our price is net plus the applicable VAT. Transport is not included, but loading onto the customer’s truck can be arranged upon request.

Condition: used, Year of construction: 2007, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 0-250-21-0442, travel distance X-axis: 3,850 mm, travel distance Y-axis: 2,015 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 3,850 mm, feed length Y-axis: 2,015 mm, feed length Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, Equipment: documentation/manual, Sale of a CNC machining center that is fully operational and has been completely overhauled. Homag Weeke Venture 5 Optimat BHC 550 Itedpfx Aexrcf Djg Ueb In 2024, extensive maintenance measures were carried out. The main spindle was completely refurbished. Additionally, a new UPS and a new vacuum pump were installed. The frequency converter was also replaced. The offer also includes a Flex 5 aggregate (not required for standard operations); however, this unit is non-functional but a repair quote is available. Specification sheet for the Weeke Venture 5 Optimat BHC 550 (year of manufacture: 2007) Main technical data Dimensions & Weight Length: approx. 6,350 mm | Width: approx. 2,550 mm | Height: approx. 2,450 mm | Weight: approx. 6,500 kg • Processing Area (X, Y, Z) X-axis approx. 3,250 mm | Y-axis approx. 1,300 mm | Z approx. 150 mm • Main Spindle Power: 12 kW, liquid-cooled Tool holder: HSK-F63 Speed steplessly programmable from 1,250 to 24,000 rpm • Drilling Units & Milling o Vertical: 25 spindles (32 mm pitch), depths up to 38/55 mm, tool holder diameter 10 mm, max. drill diameter 35 mm o Horizontal: 4 spindles in X-direction, 2 in Y-direction (32 mm pitch), depths up to 38 mm, max. drill diameter 20 mm o Grooving/Sawing unit: swivels 90° in XY-direction, cutting depth up to 30 mm, up to 7,500 rpm, max. tool diameter 1 mm • Workpiece Clamping & Table o Pod and rail table or console table with 6 adjustable supports in X-direction, LED display for position o Suction cups: e.g., 12 vacuum suction cups or various tubeless versions o Vacuum pump: approx. 100 m³/h • Tool Changer & Control o Tool changer: 14 positions front (X-direction) and 8 positions rear (Y-direction) o Control: POWERCONTROL PC 85T (TFT 17″), WOODWOP 5.0 software, incl. MDE and production lists • Additional Equipment & Safety o FLEX-5 interface for sawing/milling/drilling o Tool picking function (Pick-Up), safety mats, safety fence/doors, barcode scanner, etc. Additional technical key data from supplementary sources for 2007 • Work area: X ≈ 3,250 mm · Y ≈ 1,220 mm · Z ≈ 125 mm • Tool slots: approx. 16 positions • Vertical drilling spindles: 12 units • Horizontal drilling spindles: 4 in X, 2 in Y • Main motor: 12 kW, HSK-F63, speed up to 24,000 rpm • Other equipment: Pod-and-rail table, positioning aids, crosshair laser, LED display, HOMAG POWER CONTROL, WOODWOP 5.0 software, safety mats, handheld terminal, UPS, CE marking

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Iedpexp Rb Iofx Ag Uotb

Condition: new, Year of construction: 2026, functionality: fully functional, Cost savings for the end user €80,000 vs. €40,000 DMA supplies high-quality CNC machines at bottom prices by eliminating expensive service contracts and on-site installation visits. Ideal for professionals who prefer to remain in control themselves. The purchase price includes: - CNC control “SYNTEC” - CNC Nesting/Milling CadCam - PEGASUS Professional CadCam including online training/helpdesk - Starter kit of cutting and drilling tools for sheet metal machining CNC machining centers. • Parts supply: In the event of a defect within 12 months, components will be shipped free of charge after diagnosis (photo/video). • Excluding labor costs: Replacement of the part is done by you or outsourced at your discretion. • Designed with minimal maintenance requirements • Digital preparation: via app or TeamViewer for direct online service. This makes technician visits unnecessary, resulting in significant cost and time savings. • Online service: 24/7 Digital Support as an Alternative • Video manuals: Clips covering calibration or part replacement • Exploded view diagrams: Instantly identify the necessary component Focus on functionality: Your machine, your management, our lowest price. Iodpfx Agoxx Uc Us Ustb You can call or WhatsApp us for more information and/or to make an appointment. WhatsApp: