Used beverage production for sale (948)

Condition: used, Year of construction: 2014, Candle Filter System – Automatic, 3 Filters 2x Filter housings 30" x 3 FBFM33 1x Candle filter FBT013GNW25J 1x Sepex pump 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping Crodpfx Adjz Icilsheh

Condition: used, Year of construction: 2016, Cap Conveyor outlet High 1.8m Crodpfxjz Icu Ue Adhsh

Condition: used, Year of construction: 2011, capacity / hour ca.: 6000 working direction: left-right Strom / Volt: 14 Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 6000 labels: hot melt labels number of labelling stations: 1 number of bottle plates: 8 motor height adjustment: yes Cjdpfx Adez Ibqnehjrh speed adjusment: frequence converter

Condition: used, Year of construction: 2011, Cap Blower 12000 Caps/ Hour 2x 2m Pipes 2x Curve 90 Degree Lot of Shorts pic's And Connections Codpez Iaqasfx Adhsrh

Condition: used, Year of construction: 2015, Machine: Barida ICE 2500 Bottle neck freezer Cjdsz Ibkzepfx Adhjrh

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel Crsdpfsz H N Hhjx Adhoh - Output: up to 4,000 cans/h - Containers: sleek and standard cans - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg - CE mark on both machine plates Equipment - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2013, Format Parts Bottle Diameter : 57,71,76,94,115mm Cedpfx Ajz Ibhmjdherh

Condition: used, Machine: Primus Vaculi 6 valve row filler Credpfx Ajz Icq Aodhoh

Condition: good (used), 2 x 6,000-liter stainless steel tanks with agitators, in good condition, fully functional. Csdpfx Adjz Iwmxohjrh

Condition: used, Year of construction: 2017, Overview This SACMI KUBE 60 is a rotary self-adhesive labelling machine built in Italy in 2017. It carries six self-adhesive labelling stations and eighteen servo-driven bottle plates, and reaches a maximum output of 12,000 bottles per hour in its current configuration. The machine labels 750 ml glass bottles in a sparkling wine line, where it currently runs at about 5,000 bottles per hour. A LINX SL301 laser marking system is integrated for coding. Technical data - Manufacturer: SACMI - Model: KUBE 60 - Year of manufacture: 2017 - Machine type: rotary self-adhesive labeller - Maximum output: 12,000 bottles/h - Current production speed: about 5,000 bottles/h - Containers: glass bottles, 750 ml - Self-adhesive labelling stations: 6 - Bottle plates: 18, servo-driven - Electrical supply: 400 V, 3 phases + N + PE, 50 Hz - Rated current: 13 A Equipment - Six self-adhesive labelling stations with their own operator displays - Main touch-screen operator panel - LINX SL301 laser marking system for coding Condition The machine is still installed and in production and can be inspected by arrangement. Dismantling and loading are not included. Availability Available from 29 January 2027. Codpfxoz Durws Adherh

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) - Material: AISI 304 stainless steel, vessels and piping - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 Cedpfx Adoz Iypvsherh - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Condition: used, Year of construction: 2015, Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details - Leistung: bis zu 50.000 bph - Bauart - Rotierend - Arbeitsrichtung gegen den Uhrzeigersinn (r-l) - Modulare Maschine - Höhe des Förderbandes: 1150 mm - Etikettentyp: Kaltleim - Position des Etiketts - Brust/Hals - Stanniol - Körper - Rücken - Siegel - Flaschenformate - 0,25l Vichy-Flasche - 0,5l GDB - 0,7l GDB - 0,75l Gastro-Flasche - Anzahl der Aggregate: 3 - Teilkreisdurchmesser: 1800 mm - Anzahl der Flaschenteller: 45 - Teilungsdurchmesser: 125,6 mm - Ausrichtung der Flaschenteller über Danfoss-Servoantriebe - Erkennung von beschädigten oder umgefallenen Flaschen am Einlauf - Stoppstern am Einlauf - Leimwalzen aus Stahl - Vorbereitet für Flaschenausrichtung durch Kameraerkennung - Heissleimwerk für Siegeletikett von Robatech - Heissleimdüse an der Etikettierstation montiert - Siemens S7 Crsdsv I Tnxepfx Adhjh - Technische Dokumentation vorhanden Lieferumfang - Datumscodierer - Leimpumpen Unipump H (heizungsgesteuert)

Condition: like new (used), Year of construction: 2022, Sraml 2000 litre s/s tank with mixing Credpfsy Am Aqsx Adheh

Condition: used, machine/vehicle number: GS 401.0002/2001, Machine with double magazin suitable for this capacity / hour ca.: 6000 Magazin: single roll Drive: motor drive, inverter Shrinktunnel: hot air tunnel working direction: linear, right-left (CCW) Crsdpfx Asz Ib Nwodhsh

Condition: used, Liter per hour: 30000 Crodpfxez Ib U To Adhsh pump type: Centrifugal pump electrical power supply kW: 15

Condition: used, machine/vehicle number: PMAM010000, Bertolaso Athena 40/8 Fruit Juice Filler with Adjustable Stars Crodpfx Ajz Icgwjdhoh consisting of: - Jucie Filler 40/8 - 8 Head Screw Capper for: 28 TS RO PP (MCA28),  VC 30x60 (BVS 30/60 , Pick & Place Plastic Caps 38mm

Condition: used, Machine: Promec ROTONECK 2R.5.20.144.176 Rinser 20-stellig Crsdpfxjz Ib Rbj Adheh Technical data: capacity bph max.: 4000 working direction: left-right, rotative number of nozzels: 20 first cleaning step: peracetic acid second cleaning step: water

Condition: used, Beco 400x400 KD 10 Aus Betriebsauflösung. Originalverpackt auf Palette Beco 400x400 KDS 12 Beco 400x400 Steril S Beco 600x600 KD 10 Beco 600x600 KDS 12 Beco 600x600 Steril S Genaue Anzahl siehe Excel Liste. Crjdpfsz Icawex Adhjh

Condition: used, Machine: Bortolin MA 88 lAP Devider MA 88 lAP Credpfx Asz Icvfsdheh

Condition: used, Year of construction: 2019, Video: ?v=W2V185tm4Fo Csdpfxsz Ia I Ej Adhsrh

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N Cedpfszzz Nasx Adherh - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2023, Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Crodpfez Dimpox Adhjh Technical data - Manufacturer: Gernep - Model: Soluta 6-720 2SK SD - Year of manufacture: 2023 - Machine type: rotary self-adhesive labeller - Rated output: 11,000 bottles/h - Adjustable range: 2,000 - 12,000 bottles/h - Container table diameter: 720 mm - Container plates: 12 - Pitch: 188.4 mm - Infeed/discharge star: 480 mm diameter, 8 divisions - Self-adhesive labelling stations: 2 - Labelling station drive: servo - Container plate drive: servo - Main drive: asynchronous - Infeed worm: single worm, mechanical drive - Height adjustment: electric - Running direction: left-hand machine - Installation variant: linear - Pneumatics: Festo Bottle formats Built for two glass bottle formats, each at 11,000 bottles per hour: - Glass bottle, 250 mm high, 75 mm diameter - Glass bottle, 215 mm high, 65 mm diameter - Labels on both formats: paper body label 110 x 75 mm, paper back label 50 x 75 mm Equipment - Two self-adhesive labelling stations - Touch panel operation, free-standing control cabinet, swivel arm - Frequency converter - Broken-container detection - Remote maintenance including VPN router - Prepared for dating and coding - Prepared for optical orientation - Format parts included: one infeed worm, one infeed/discharge star, one set of container plates, one set of centring bells Not fitted: label inspection, mechanical orientation. Condition The machine is set up and under power and can be inspected by arrangement. Availability Immediately available.

Condition: used, Year of construction: 2007, Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Technical data - Manufacturer: KHS - Model: Innofill NRF - Year of manufacture: 2007 - Output: 12,000 bottles/h - Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm - Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top - Vacuum device with vacuum pump - Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps - Machine pitch 36π, running direction left to right Codpfx Adsz Hcausherh - Conveyor: stainless steel slat chain, 85 mm wide, conveyor height 1,250 mm - Power supply: 400 V, 3/N/PE, 50 Hz, 90 A nominal current, 100 A slow fuse; control voltage 24 V DC - Enclosure type 12 - Overall dimensions approx. 5,300 x 3,600 x H 4,400 mm Scope of delivery - Filler-closer monoblock with guarding, front panels slide up - Automatic central lubrication - Two infeed hoppers for corks and caps with elevating feed, approx. 1,600 x 1,200 x 1,720 mm and 1,500 x 1,250 x 1,550 mm - Stainless steel CIP unit, approx. 3,000 x 1,300 x 1,900 mm - Stainless steel control cabinet, approx. 2,500 x 750 x 2,100 mm - Stainless steel trolley, approx. 800 x 750 x 1,650 mm - Two trolleys with change parts, colour-coded format sets - KHS documentation: operating manuals, spare parts list, 2022 operator-panel supplement Condition Used. The machine is still installed at its production site and can be inspected by appointment. Availability Immediately.

Condition: used, Year of construction: 2009, machine/vehicle number: 09-0116, Cardboard labeling HERMA DS Cedpfjz Icm Djx Adhjrh

Condition: used, Year of construction: 2009, Capacity: 10.000 bph Csdpsz Iawtjfx Adhsrh Format parts: 0,75 L Bordeaux 310 and 330 and 1,0 L Schlegel