Accessories and spare parts for sale
Identified location: Ashburn (US) (Edit)
Double end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-Motor from Wadkin router type LS 3687
Bg33pbsvfa
-Spindelarrettierung
-Voltage 105/140 volts
-Power 2.2 / 3.0 kW
-Speed 17200/23000 U / min
-Dimensions 380/230 / H190 mm
-Weight 19.5 kg
workpiece return for single sided edge banding machine (right machine)Brand: LIGMATECHType: ZHR 05/R/105Year: 2000 length: approx. 12 meters
Bfk0ex0teq
Stationary table with support plate for edges
and trimming device
Year of construction: 2019
as good as new
with magnetic base set
with suction cup set
with socket for electrical appliances
with on-off switch
with power supply cable 2,5 m
Work table dimensions 800 x 440 mm
Table height 300 mm
Ohg2d
Weight 26,5 kg
availability: short term
Storage location: Hochheim
Homag UNIVERSAL TRIMMING Unit for installation into edge banding or combination machines.
There are 2 aggregates available:
- 1 x UF 11 with 1 motor
2sheyu
- 1 x UF 12 with 2 motors
Condition as good as new
after regeneration in 01/2019 was no longer in use
Bfsrvj3exb
Hotmelt Adhesive Unit QA34 Left
Bepk8osocn
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor
-5.5 kw
-Speed 2870/5800 rpm at 50/100 Hz
Bikwxrbji9
-Shaft Ø 35 x 90 mm total length
-Overall dimensions 550/230 / H150 mm
-Weight 45 kg
Pictures are just examples
Br9arliv
Converter 100 Hz
Make: Himmelwerk
Type: SPG200L/30/100
Drive motor
- Rated voltage (V): 380
- Rated power (kW): 15
- Rated current (A): 29
- Nominal frequency (Hz): 50
- Circuit: triangle
Excitation winding
- Excitation current (A): 29,6
- Excitation voltage (V): 380
- Excitation frequency (Hz): 50
Discharge side
- Apparent power (kVA): 30
- Output current (A): 45,5
- Output voltage (V): 380
- Output frequency (Hz): 100
RUBBER PLATES fur edgebander-squaring machine "STEFANI" mod. MAJOR
DIMENSIONS : 70 X 95 MM
Biixebcp2r
260 pieces available in stock
Several units of used and fully reconditioned Homag glue application units:
- left and right hand side
- QA 34 and QA 50
Bk3mau
- with or without teflon coating (PTFE)
The stated prices serves as an approximate guideline. The price depends on the version (e.g. QA34 / QA50) or other extras like Teflon-coating. Please ask for a detailled quotation.
TFU140/R/25/10/055
BOOMERANG® Feedback TFU140/25/10
- Optimat -
Layout: 5-013-70-9920
Machine length: 5,760 mm
stop side : right
working height : 950 mm
Feed rate : 8 - 18 m/min
NOTE:
The basic machine must be mechanically and electrically prepared for the retrofitting of the return system.
Use
The BOOMERANG® return system TFU140 enables one-man operation on single sided edgebanders.
P8fnen
Function
Workpieces coming out of the machine are taken over by driven chain booms supported by a driven r...
Hebrock quick-change glue pot, hot melt black
Quick change basin incl. glue application roller and glue dosing
for Hebrock AKV 3006 DK-F / jg 2014
-Special cleaning system PU
-adhesive outlet downwards
-plate thickness 8 to 60mm
Bjyygv797e
The quick-change glue basin comes from a kitchen company that sold its edge banding machine in 2018. The company worked with 3 change basins. The basin offered for sale is hardly used and was used for gluing the special colour black.
For clarification regardin...
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor
Bngxssvg
-4.4 kw
-Speed 5800 rpm at 100 Hz
-Shaft Ø 35 x 92 mm total length
-Overall dimensions 430/230 / H126 mm
-Weight 24 kg
Pictures are just examples
Converter 200 Hz
Make: Perske
Type: DA10/2 (6DW10/6)
Operating mode (S): S!
Drive motor
- Rated voltage (V): 380
- Rated power (kW): 4,2
Bfk0heeaey
- Rated current (A): 9,8
- Nominal frequency (Hz): 50
- Circuit: triangle
Excitation winding
- Excitation current (A): 5,1
- Excitation voltage (V): 380
- Excitation frequency (Hz): 50
Discharge side
- Apparent power (kVA): 6
- Output current (A): 26
- Output voltage (V): 133
- Output frequency (Hz): 200
HOMAG SNIPPING UNIT HL 81/83
Nº HOMAG: 1-011-05-3630
Dw8kca
We offer reconditioning / complete re-building of conveyor chains for double-sided (Homag-) machines:
• (double-sided) edge banding machines with heavy-duty version of conveyor chains.
• double end tenoners
• Combination machines
• Postforming machines
• Flooring machines
The chains are being re-built based on existing quality-tested block links. All other (wear and tear-) parts e.g. studs/pins, needle bearings, track rollers, guide bearings, seal rings, etc, will be replaced by new parts.
For ...
Frequency converter from a Hebrock Euro 2000, year 1998
Smooth running
Bgwcxsblon
Sliding contacts and bearings in good condition
not reconditioned
Hebrock quick-change glue pot, hot melt transparent
Quick change basin incl. glue application roller and glue dosing
for Hebrock AKV 3006 DK-F / jg 2014
-Special cleaning system PU
S7ghzh
-adhesive outlet downwards
-plate thickness 8 to 60mm
The quick-change glue basin comes from a kitchen company that sold its edge banding machine in 2018. The company worked with 3 change basins. The basin offered for sale is hardly used and was used for gluing the special colour transparent.
For clarification ...
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor
-Power 1.5 kW 5710 rpm at 100 Hz
-Voltage 380 volts
-Shaft Ø 30 x 65 mm
Bisxewvxvl
-Shit class IP54
-Dimensions 345/128 / H145 mm
-Weight 11.2 kg
Pictures are just examples
Converter 200 Hz
Make: Perske
Type: DA10/2 (6DW10/6)
Operating mode (S): S1
Protection class (IP): 54
Insulation class: B (B/F)
Bfk0hnvfyz
Drive motor
- Rated voltage (V): 380
- Rated power (kW): 4,2
- Rated current (A): 8,9
- Nominal frequency (Hz): 50
- Circuit: triangle
Excitation winding
- Excitation current (A): 4,7
- Excitation voltage (V): 380
- Excitation frequency (Hz): 50
Discharge side
- Apparent power (kVA): 6
- Output current (A): 26
- Output voltage ...
MILLING UNIT FK13
Xwbqw
Nº HOMAG: 1-055-05-0122
Sanding aggregates for HOMAG edge banding machines
different models
Bljb0t9w9m
Slide Fuegefraeskoepfe for edge banding machines
Ever a cutter of L + R, Z3
D 100mm (by Exchange System flight is always 100 mm, so low set-up times)
Height 48mm
Hole 30mm
suitable for Brandt
The cutters are built in 2015, equipped, most recently in 2017 with new cutting zeitdem no longer used, so practically as good as new, flight circle 100 mm, cutting undamaged
Beruuw0unw
Please the PDF file with our terms and conditions and order form.
The machine can be demonstrated like by appointment wi...
ALL SPARE PARTS EDGEBANDER GRIGGIO,
MANEA - STEFANI - CELASCHI
Hdrbbdt
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor
-Power 3-4.5 kW 5550-8590 rpm at 267-400 V / 100-150 Hz
-Power 4.5 kW 8590-11440 rpm at 400 V / 150-200 Hz
-Shaft Ø 30 x 65 mm
-Dimensions 410/127 / H105 mm
Bisxfag7jm
-Weight 14.5 kg
Pictures are just examples
Converter 200 Hz
Make: Perske
Type: DA10/2 (6DW10/6)
Nooyr
Operating mode (S): S1
Protection class (IP): 54
Insulation class: BF
Drive motor
- Rated voltage (V): 380
- Rated power (kW): 4,2
- Rated current (A): 8,9
- Nominal frequency (Hz): 50
- Circuit: triangle
Excitation winding
- Excitation current (A): 4,7
- Excitation voltage (V): 380
- Excitation frequency (Hz): 50
Discharge side
- Apparent power (kVA): 6
- Output current (A): 26
- Output voltage (V): 133
-...
MILLING UNIT FK13
Humjbwqiq
Nº HOMAG: 1-055-05-0125
3 x DIAMAX jointing cutter DP for Homag edge banding machines.
for continuous lines Homag
Product no. 184030
(Price / piece)
the low noise of tear-free joining of melaminharz - and paper coated, HPL, foil-coated and veneered panels
Execution
symmetric and asymmetric design
left and right can be used
Axis angle arrow-toothed
spiral cutting arrangement
Nachschärfzone 1.5 mm
Advantages
optimal gluing of the edges
noise and investigated
Bore: 30mm diameter
Beqzktr9ob
Cutting width 63 mm
Flying...
1000 064 PERSKE milling motor KNS 21.05/2 for edge banding machine IMA type AVM/S/K/I/660/SRL20 or similar, RADIUS cutters left/right,.
Igsunlqas
Price per piece: €150,00 + VAT, In the set: €250,00 + VAT
Vacuum box
• Conserves 2 PUR applicators without any reaction of the adhesive
• Conserves PUR applicators over several days
Bjd37pr9
• Easy handling
• No cleaning of PUR applicators required
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor
-Power: 2.2 kW 5680 rpm at 100 Hz
-Voltage: 380 volts
Dsi0qfp
-Shaft mounting: O 30 x 65 mm
-Splash class: IP54
-Dimensions: 390/127 / H140 mm
-Weight: 13.6 kg
Pictures are just examples
Converter 200 Hz
Make: Himmelwerk
Type: 2GG180/245 (8iPG180/265)
Operating mode (S): S6
Protection class (IP): 54
Insulation class: B/F
Bfk0eojnqp
Drive motor
- Rated voltage (V): 380
- Rated power (kW): 30
- Rated current (A): 61
- Nominal frequency (Hz): 50
- Circuit: triangle
Discharge side
- Apparent power (kVA): 30
- Output current (A): 130
- Output voltage (V): 133
- Output frequency (Hz): 200
Attention! Use for max. 18 kVA.
- Chamfer
- R 2
- R 2
Bhw3f87i
- R 3
Leimbehaeltervorderteil
Y3m9fuhzm
Fabrik Homag
Zu Type KL 47/2
1 Stueck Leimbehaeltervorderteil links
No. 2-006-09-0142
Generalueberholt durch Homag
1000 062 PERSKE milling motor KNS 21.05 / 2 for edge banding machine IMA type AVM/S/K/I/660/SRL20 or similar Mills links/techts,.
Price per piece: €150,00 + VAT, In the set: €250,00 + VAT
Gvq8qo
maximum material length 2500mm
maximum material width 800mm
material thickness 8-60m/min
variable regulated feeder 8-30m/min
Cnw0ykxi
Moeller electronics
year 2012
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor
-Power: 4.4 kW 2860 rpm at 50 Hz
-Power: 6.6 kW 5870 rpm at 100 Hz
-Voltage: 230/400 volts
-Acquisition shaft: Ø 40 x 80 mm
-Tool: Ø 200 mm
-Dimensions: 540/190/H200 mm
Ql8dyqzby
-Weight: 50 kg
Pictures are just examples
Converter 200 Hz
Make: Perske
Type: DA12/2 (15DW12/6)
Operating mode (S): S1
Protection class (IP): 54
Insulation class: B
Drive motor
- Rated voltage (V): 380
- Rated power (kW): 11
Dmjydat
- Rated current (A): 20
- Nominal frequency (Hz): 50
- Circuit: triangle
Excitation winding
- Excitation current (A): 11
- Excitation voltage (V): 380
- Excitation frequency (Hz): 50
Discharge side
- Apparent power (kVA): 15
- Output current (A): 65
- Output voltage (V): 133
-...
KEB HOMAG COMBIVERT 4-008-39-0546 V1.1
ART-N: 12.F4.S1D-4A00
INPUT: 3 PH 380. . .480V
Bib30820hd
OUTPUT: 6.6KVA 9.5A 4.0KW2/4P 50/60HZ
SER-N: 97051421/0182600
Buffing unit with oscillation
Bfrsr7e78v
1000 063 PERSKE milling motor DVMS 904/2
for edge banding machine IMA type AVM/S/K/I/660/SRL20 or similar
Shaft d = 20 mm,
Price per piece: 150,00 € + tax,
Ccsnjep
in a set: 250,00 € + tax
ALL SPARE PARTS , MOTOR, WORKING UNITS for STEFANI - GABBIANI SQUARING AND EDGEBANDING MACHINES
Bdmgqaworm
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-1x motor: 0.15 kW 11160 rpm at 200 Hz
-Voltage: 133 volts
-Take shaft: O15 mm
Qkxdbseg0
-Tool: Ø 160 x 3.5 mm
-Number: 3x motors available
-Price: per piece
-Dimensions: 200/85/H70 mm
-Weight: 3.3 kg
Scoring saw IMA- controllable
Stgf3s
KEB HOMAG COMBIVERT 4-008-39-0546 V1.1
ART-N: 12.F4.S1D-4A00
Fcigq8a
INPUT: 3 PH 380. . .480V
OUTPUT: 6.6KVA 9.5A 4.0KW2/4P 50/60HZ
SER-N: 97070361/0301282
Form trimming unit FK 03 for edge banding machine Homag Kl-KFL series.
Suitable as spare parts source
These are two pieces-the router and router
Clsbv7eju