Used Edge Milling Machine for sale (65,935)

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Hsdsz Ekkxspfx Adwou Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Hedpfx Adjxxb Rrsweu Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: Hedpfox D Tbmjx Adwou 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM Hodpfx Adsz Eh Egswsu AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: used, Year of construction: 2012, functionality: unexamined, GERIMA SMA 50P portable beveling/edge preparation machines for sale. Quantity: Hedszyah Sjpfx Adweu - 2 units Main specifications: - Manufacturer: GERIMA - Model: SMA 50P - Year: 2012 - Portable beveling/chamfering machines - Suitable for metal edge preparation and beveling applications - Supplied in transport cases - Inserts/accessories included, as shown in the photos Used equipment, sold as-is. Condition and completeness are shown in the photos. The listed price is for both units. Individual sale can also be arranged. Location: Estonia. Loading/collection: Forklift/pallet handling capability available on-site. Transportation is at the buyer’s expense.

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm Hedpfx Adob A Sy Hswsu -Dimensions: 560/220/H240 mm -Weight: 16 kg

Year of construction: 2016, condition: ready for operation (used), MFK U.06845 Universal edge and contour milling machine, edge milling machine Motor power: 0.5 kW Hsdpjz E U I Uofx Adwsu Speed: approx. 17,000 rpm Chamfer width, stepless: 0-3 mm Table: 280 mm x 300 mm Space required: 280 mm x 300 mm x 205 mm (L x W x H) Weight: approx. 22 kg Year of manufacture: 2016 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor Hsdpfeb A Ta Nex Adwou -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top Hodpfx Aezv Eaxsdwju 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Hodpozy E D Sofx Adwju Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: new, CATALOGUE NUMBER HL001 - New machine, in stock - Preliminary milling - Radius milling + polishing TECHNICAL DATA - Board thickness 45mm - Edge thickness 0.4 mm – 3 mm - Minimum board width 90mm - Minimum board length 90mm - Feed speed 7m/min - Preliminary milling 9000 rpm - Top/bottom 10500 rpm - Front/back 8800 rpm - Polishing 2800 rpm - Motor 6kW - Feed motor power 0.75kW - Preliminary milling motor power 1.5kW - Glue spindle motor power 0.25kW - Top-bottom milling motor power 0.18kW - Top milling motor power 0.55kW - Top polishing motor 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor 3-phase 0.12 kW, 1-phase 0.18 kW - Working height of the table 856mm, extended support width 560mm - Dust extraction connection 3x100mm - Dimensions L/W/H 3200/1200/1200mm, weight 660kg Net price: 49900 PLN Net price: 11605 EUR, depending on the exchange rate of 4.30 EUR Hodpfszx Rq Ijx Adwju (Prices are subject to change due to larger fluctuations)

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. Hjdpjv T Ttfsfx Adwsu - 1.1kw engine. - We will help you organize a profitable shipping company or courier.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Hedezuxn Tspfx Adwju For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Hedpfx Adob A Nypewju -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2880 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 220/380 volts -Receiving shaft: Ø 40 mm -Tool: electrically movable -Tool: Ø 180 x 28-48 mm Hodpjb A Hl Njfx Adwsu -Dimensions: 830/400/H200 mm -Weight: 70 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor Hjdpfxsb A Tbfo Adwju -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm Hedpfxjb A Tbds Adwju -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm Hedpfx Ajb A Tbgodwju -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 2900 rpm at 50 Hz -Power: 6.3 kW 5900 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 38 mm -Tool: Ø 200 x 30-60 mm Hodpfxsb A Tbtj Adwsu -Dimensions: 640/150/H250 mm -Weight: 52 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor Hodpob A Tbusfx Adwsu -Power: 4.4 kW 2890 rpm at 50 Hz -Power: 6.6 kW 5880 rpm at 100 Hz -Voltage: 220/380 volts -Mounting shaft: Ø 35 mm -Tool: Ø 240 x 20 mm -Dimensions: 550/270/H150 mm -Weight: 51 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor Hsdpfx Aob A Idijdwju -Power output at 50 Hz: 4.4 kW, 2890 rpm -Power output at 100 Hz: 6.6 kW, 5860 rpm -Hole: Ø 35 mm -Tool: Ø 250 mm -Number: 3x motors available Price: per piece (other types of engines also available) -Dimensions: 560/240/H160 mm -Weight: 50 kg

Year of construction: 1989, condition: used, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Diamond polishing and milling machine - For high-gloss milling and polishing of straight plastic edges Hjdpszpblqjfx Adwou - Suitable for PMMA (acrylic glass) and other thermoplastics - Diamond polishing and milling unit - Precision workpiece guidance - Robust welded steel construction - Power consumption: 1.5 kW - Supply voltage: 220 V - Mains frequency: 50 Hz Availability: available shortly Location: 63934 Röllbach

Condition: new, Edge and contour milling machine Manufacturer: Assfalg Model: KKE 1 Hsdsbhfzbopfx Adwju Condition: New machine Speed: 8,000 - 24,000 rpm (continuously variable) Maximum chamfer width: 3 mm Standard equipment includes: - Guide rail - Allen wrench, open-end wrench - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with lock nut - Operating manual

Condition: like new (used), Edge milling machine for deburring/beveling of various internal and external contours Bevel size adjustable up to max. 10 mm at 45° Cutter 45° / 8 blades double row – KIF/MF. For steel, light metal, stainless steel, cast iron, non-ferrous metals Includes 21 packages of 10 indexable inserts X11.30.35.45 P25 BS TiCN Includes 7 packages of 10 fastening screws for X11.30.35.45 Available at extra cost: 1 milling head 30° 1 milling head 35° 1 milling head 45° 1 milling head 60° Hedpfjtwcn Rox Adweu Ex works, excl. VAT.

Condition: used, Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides -Motors: swiveling Hedpjb Uhrzefx Adwou -Mill: with inserts -Dimensions: 900/1100/H1000 mm -Weight 274 kg