Used Straight Bit for sale (2,282)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 7,800 mm, Bavelloni Straight Line Edger Model: VE500 11 11 Spindle Codpfjydc I Djx Ac Tehb Excellent condition Delivery and Installation available

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Csdpfezr Iwrox Ac Tohb Pre-Auction Offers Considered Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Cjdpev Nv Taofx Ac Tehb Net weight 4000 kg

Condition: used, Omef 2-Belt Vertical Side Grinder for straight or shaped parts. Motor power: Chsdpfx Acszxg Enj Tsb traction 2.2 kW with electronic inverter 4 polishing motors of 4 kW each

Condition: used, Used approximately 8,100 litre stainless steel vertical storage vessel. Internal approximately 1750mm diameter x approximately 3000mm straight side. Has welded dished top and bottom heads. Mounted on (4) legs. Codpfx Ajzn Nr Noc Tshb Specifications: Capacity: 8,100 L

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: general overhaul Control: Mitsubishi - 64 bit CNC Generator power: 70 Amperes - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up rotary electrode changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system Cjdozx Ambspfx Ac Tehb - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64 bit, manufactured in 2006, has undergone a comprehensive and professional general overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the aforementioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screws of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt scrapers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is ready for immediate use and is ideally suited for reliable production operation. 09/02.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Chjdpjuna E Hefx Ac Teb

Condition: used, Year of construction: 1998, max. wheel diameter 1000 mm gear width 152 mm max. module 17 max. wheel diameter 1000 mm control Fanuc Serie 150 M total power requirement 75 kW weight of the machine ca. 29,5 t Max. diameter. Gear: 1,000 mm Dimensions: 5.5 x 5.3 x 3.2 m Weight: 29.5 tons Control: CNC (FANUC Series 150M) Chsdpfx Aoyan N Ejc Tsb Max. wheel diameter 1,000 mm Max. day with single timing 1,000 mm Face milling Max. module 17 Control FANUC Series 150 M Number of teeth 5 - 300 FACE WIDTH 152 mm X-axis -305 Y-axis -305 / +305 mm Z-axis -25 / +711 mm B-axis -5 / 90 degrees

Condition: ready for operation (used), DAREX AP 5000 / Precision spiral drill grinding machine Chedjy U H Ecepfx Ac Tsb -CE marking -Grinding range 1.5 - 26 mm -Suitable for standard spiral drills (HSS cobalt, optionally carbide) -Grinding types: conical taper, and automatic cross-grinding (split point) to reduce the transverse cutting edge -Automatic operation -Various inserts Dimensions: L x W x H 0.5 x 0.5 x 0.4 meters / Weight 50 kg Errors and omissions excepted.

Condition: used, Year of construction: 2006, FOR SALE: PROMASZ B1PK-2000 Edge Profiling & Polishing Machine PROMASZ B1PK-2000 stone edge profiling and polishing machine in working condition. The machine has been used in a professional stone fabrication workshop for processing quartz, granite and other stone materials. It is a simple and reliable solution for workshops looking for an affordable edge-processing machine. Specifications Manufacturer: PROMASZ Model: B1PK-2000 Manual operating mode Processes front edge only Suitable for straight edge profiling and polishing Robust steel construction Available for inspection under power Condition Used, in working condition Regularly maintained Can be demonstrated before purchase Included Chedpfx Aszcdhvoc Tsb Machine as shown in photos Existing tooling (to be agreed with buyer)

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: general overhaul Control: Mitsubishi - 64 bit CNC Generator power: 70 Amperes - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up rotary electrode changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64 bit, manufactured in 2006, has undergone a comprehensive and professional general overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected. Codpjzgckvjfx Ac Tehb The following overhaul work was carried out on the aforementioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screws of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt scrapers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is ready for immediate use and is ideally suited for reliable production operation. 09/02.

Condition: excellent (used), Attachment holders, standard holders and accessories, spiral drill bits, BILZ spiral drill bits, reaming bits, BILZ reamers, BILZ holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 8 pieces -Recordings: MK5, MK4, MK3 -Spiral drill bits: 35 pieces -Sizes: Ø38 mm - Ø95 mm Chsdpfeyrgwxjx Ac Tob -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 550/300/H70 mm -Weight: 28 kg

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Chodpetyqhqjfx Ac Tob

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Cjdpfeyh Rmmex Ac Tohb Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: - 18-piece cutter set - Chip conveyor - Technical documentation

Condition: excellent (used), Year of construction: 1950, Safag Type27 Special Carbide Bit Grinder Brand: Safag Model: 27 Serial number: 296 Year of manufacture: Vintage 1950s (approx.) Dual 6" diamond wheels with fine grit (700) Universal tool holder Tool holder for up to 10 mm square bit tools Coolant tank mounted on the back of the machine 3/4 HP main drive 220 volts 3Ph Cedeh Izv Aepfx Ac Tohb Complete factory locking system, wide range of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2018, functionality: fully functional, Complete Orbital Welding System: OWC Plus Controller + Inverter T 180 + CWH 53 Weld Head Description: For sale is a high-quality, complete orbital welding system from Orbitalservice GmbH. The package includes the control unit, power source, cooling system, and a closed weld head with accessories. Ideal for precise tube welding applications. German-made quality. Components included in the package: 1. Controller & Inverter: - OWC Plus Orbital Welding Controller: Modern control unit (weight: 2.5 kg). Chedpfx Acsyg R Sve Tob - Inverter T 180 Basic Plus - DC: Powerful power source (3 A - 180 A), weight: 12.2 kg. - Mains cable: Connection between power source and controller (80 cm). 2. Cooling: - Water cooling unit WUK 7 Plus: 230 V version, includes two self-sealing couplings (weight: 16.2 kg). 3. Welding head & accessories: - Closed weld head CWH 53: For tube outside diameters (OD) from 6 mm to 53 mm. Includes drive unit and 8 m hose package. - Collet set: Spring-loaded set for CWH 53 (OD 19.0 mm), consists of 4 half-shells made from high-strength aluminium. 4. Other accessories: - Remote cable control RC Plus+: 8 m cable length, suitable for AVC-OSC. - Argon pressure regulator: 3-way, chrome-plated brass. - Gas hose: 3 m, for OWC Plus control unit. Technical details: Manufacturer: Orbitalservice GmbH / Made in Germany. Original list price: approx. €15,900 (before discounts as per quotation). Condition: [Please insert current condition here; e.g.: "The system is from 2018, has seen little use and is fully functional."] Price: €6,500 plus VAT Location: PL 2 units available. Scope of delivery: Complete system as described above. More pictures available on request. Can be picked up in Poland or shipped via forwarding agent.

Condition: good (used), Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex drill bits, drill bit holders Chedpfx Aezg Emasc Tjb -Manufacturer: Sassex, spiral drill bits, 33 pieces -Type: E16 / E17 Ø 40 to 128 mm -Submission/Price: complete -Mounting bracket: available in stock for an additional charge -Transport dimensions: 530/340/H50 mm -Weight: 15 kg

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Csdpsznn Upjfx Ac Tehb Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

Condition: refurbished (used), Year of construction: 2025, WAFIOS straightening and cutting machine R5 Fully refurbished in 2025 Diameter range: 6-14 mm Cutting length: 6000 mm Speed: 23 - 90 meters/min Weight: 3.500 kg Motor power: 30 kW Note: The extension currently measures 6 meters but can be adjusted to 12 meters if required. Diameter range: 6-14 mm Cutting length: 6000 mm Speed: 23 - 90 meters/min Weight: 3.500 kg Cedpfx Acsymb A Eo Tohb Motor power: 30 kW

Condition: used, SCHNELL Straight and cut OPTIBAT 65T/3/14 Length of OPTIBAT: 14 m Feeding unit driven by servomotor: 160 m/min Cjdpfoymcdkex Ac Tshb 3 Additional cutting level testing photocells. OPTIBAT is very precise Side gangway with safety rail Kit for outdoor positioning Length of OPTIBAT: 14 m Feeding unit driven by servomotor: 160 m/min Additional cutting level testing photocells: 3 (OPTIBAT is very precise) Side gangway: with safety rail Kit: for outdoor positioning

Condition: used, Conveyor Kolbus Description: Cedpjyt Drvjfx Ac Tshb - Transport system, length (approx): 150 cm.

Condition: used, Conveyor Kolbus Chodpfx Asyt Dr Asc Tsb Description: - Transport system, length (approx): 450 - 530 cm. - Conveyor (walk through)

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Technical data: - Length: Various - Diameter: Various - Shank: Various - Weight: 12 kg - Application: Woodworking Chsdpfx Aezrybpjc Tob

Condition: ready for operation (used), Year of construction: 2001, PM 74-2 2001 Year Straight Chjdpfx Acszb Nxks Tsb 22 mil impressions Easy plate Alcolor Dampening with Technotrans Grafix Alfatronic 200 powder Gear free of damages Tools and Books Brand new rollers

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Maysso / Unisto / Hartner / Stock, Spiral drill bits 6 pieces Ø 51 - 70 mm -Type: Two-flute end mill, MK5 chuck with flat drill tip -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock Chjdpoy A Inusfx Ac Tjb -Transport dimensions: 345/270/H100 mm -Weight: 23.7 kg