Frequency converter 220 V 200 Hz 6.5 kW

OTT HC132

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Itodpfx Aket Hal Dopen Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes In perfect working condition Iodpfjxg El Ajx Akpjtn 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Condition: used, Year of construction: 2004, functionality: fully functional, number of slots in tool magazine: 7, spindle motor power: 6,600 W, 3 AXIS machine Vacuum pump 100 m3 Electrospindle 6,6 kW motor power Routing unit + Saw aggregate Drilling unit 10 +4 (10 vertical + 4 horizontal) ISO 30 router chuck Manual lubrication Itodpfx Akowhvwnjpjn Monitor 15" XILOG PLUS Software Windows XP Machine is still working at Sellers, video of machine in working mode available on request

Condition: used, Year of construction: 2001, machine/vehicle number: AE/22614, functionality: fully functional, cutting width (max.): 4,500 mm, total length: 5,000 mm, total width: 7,000 mm, total height: 2,350 mm, cutting length (max.): 3,200 mm, SECOND-HAND PANEL SAW SCM MOD. SIGMA 65 - CE RULES - Cutting dimensions: 4500X3200 mm - Main blade projection: 65mm - N. 6 clamps - Saw carriage speed: 12m/min - Main blade diameter: 300mm - shaft diameter 80mm - Scorer blade diameter: 160mm - shaft diameter 55mm - Main blade motor: 5,5kW - Overall dimensions: 7000x5000x4350 Iedpfx Aex Rvazekpotn - S/N AE/22614 - Year 2001

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V Itjdpfozn I Aaex Akpsn The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: used, Altendorf F45 panel saw 320 cm carriage, blade tilt and height adjustment via hydraulic system, Itsdey T Eutopfx Akpen rip fence on the right side, manually adjustable up to 1350 mm, scoring saw, 0.75 kW, 5.5 kW motor, max. blade diameter 450 mm.

Condition: used, Year of construction: 2023, functionality: fully functional, workpiece height (max.): 60 mm, HOLZ-HER CNC - Dowel Drilling & Insertion Machine POWER - PIN 7605 Workpiece thickness: 12 - 60 mm Workpiece width: minimum 150 mm (horizontal & vertical processing) Workpiece length: min. 60 mm, max. unlimited (limited when using positioning stops) Software: Campus V8 Power-Pin (1x license) Itsdpfxeyzg Dfs Akpjn Continuous LED strip for easy orientation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as for untreated dowels when used with white glue Glue application system LS2 with electronic monitoring of the nozzle needle ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal), 3-spindle MOT3 package – motorized adjustment of drilling depth 2D barcode scanner 21.5" touchscreen The POWER-PIN dowel machine is suitable both as a standard dowel machine and as an ideal addition to, for example, nesting or console machines. From cabinet furniture to premium solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip provides constant machine status indication and assists the operator by showing the correct workpiece position for insertion. The integrated barcode scanner can be used to read DataMatrix codes, for example, which contain all machining information about the workpiece. Drill positions and drilling depths are automatically set and approached by the machine – ensuring maximum precision and efficient operation. The machine has been refurbished at the Voitsberg factory and the software has been updated to the latest version available at the time of refurbishment! Delivery, installation, and commissioning training for the machine can be arranged directly with us at an additional cost. The machine is currently located at our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Itsdpfjzwg Tiex Akpsn Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: ready for operation (used), A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible. Ijdpfxeyq R E Ro Akpstn

Condition: used, Year of construction: 1999, functionality: fully functional, power: 16 kW (21.75 HP), cutting height (max.): 90 mm, cutting width (max.): 4,500 mm, saw blade diameter: 30 mm, cutting length (max.): 4,500 mm, Cutting length 4500 mm Cutting width 4300 mm Cutting height 90 mm Saw blade diameter max. 350 mm Main saw motor: 7.5 kW Scoring saw blade diameter max. 160 mm Scoring unit motor power 1.5 kW Air cushion tables: 3 pcs 1230 x 400 mm Clamping jaws 7 pcs Saw carriage height adjustment on THK guides Ijdewu Ib Sopfx Akpotn Pressure beam with slots (pass through) Side aligner Pneumatic quick-release saw blade system Extraction diameter 4 x 120 Installation dimensions L x W 6700 x 7100 mm Weight approx. 2500 kg