Veneer press

Ott

Condition: used, OTT Tornado - TOP Control system – via a 15-inch color touch monitor for full automation and maximum ease of operation CM-CombiMelt adhesive application system suitable for processing EVA and PUR hot melt adhesives, as well as all common cleaning granules Joint processing unit for attaching chipboard Automatic roll magazine Automatic edge magazine Double-head unit with automatic pivoting 0° / 3° Flush trimming unit – for flush trimming – 12 mm Fine milling unit RADIUS – radius milling – profile cutter R2 – R5 Automated copy milling – corner rounding Pull blade unit – radius – bevel Surface pull blade unit Lubricant spray device – PU Cleaning set with fine scrubbing device Godpozcm Dysfx Afkjiu Very stable workpiece support with roller conveyors – FRONT with scissor lift Complete tool set included Machine is in EXCELLENT CONDITION Machine from a craft business Few operating hours Available from the Lieboch warehouse

Condition: new, Year of construction: 2025, functionality: fully functional, Stair milling machine for mortising treads and risers into stringers and posts. The machine is equipped with a high-frequency milling motor. The machine is brand new. 400 V, 50 Hz. Gsdpfx Aeyxzacsfkjiu

Condition: new, diameter // mm Cutting (quantity) / weight / kg Gjdpfx Afszcgkaokoiu

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Gjdezcd Amepfx Afksiu Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 20,200 h, load capacity: 5,500 kg, fuel type: gas, Equipment: clamp, gripper hydraulics, For sale is a Hyster S 5.5FT gas-powered forklift. The forklift is fully functional and in good condition. Godswalyiepfx Afksiu Not offered with forks as shown, but with a Mayer paper roll clamp with rotary hydraulics from 2005 (last photo). Technical specifications: Year of manufacture: 2012 Rated load: 5500 kg (5.5 tonnes) Load center: 600 mm Turning radius: approx. 2375 mm - 2534 mm Lift height: up to 5300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm * 1,420 mm * 2,500 mm mm Weight: approx. 7,800 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, Gedpszb Iuqofx Afkeiu 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: excellent (used), Year of construction: 1991, Manufacturer: Ott Model: JU 2511/70 Giedpfx Afoyutxnjkou Year of manufacture: 1991 Technical condition: very good – inspection possible Type: Veneer press Drive: electrohydraulic Power: approx. 13.6 kW Heated plates: aluminium, dimensions 2550 x 1100 mm (L x W) Heating: electric Hydraulic cylinders: 4, each with a diameter of 80 mm Total pressing force: 70 tons Specific pressing force: 2.5 – 3.5 kg/cm² Opening stroke: 400 mm Control: push-button control for open – close – stop Pressure monitoring: automatic adjustment Adjustable limit switch: for specific opening stroke Safety features: safety pull cord Transport dimensions: approx. 2900 x 1400 x 2000 mm (L x W x H) Weight: approx. 3000 kg Location: ex works customer - will be delivered to stock 54634 Bitburg -

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Gsdpfx Aju Egp Iofkeiu Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: excellent (used), Ott hydraulic veneer press, in top condition. 120 tons Pressing area: 2550 x 1350 mm Water-heated veneer press Gsdoza Hxxspfx Afkeiu Test run can be arranged at any time.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, overall weight: 3,000 kg, Equipment: CE marking, OTT Tornado + Like new, with belt-driven pressure system Full equipment including TextureFinish Narrow parts package Spray system for PUR processing Free space for, e.g., a grooving unit Overhang milling cutter for increased edge material Giodpfxjzcb Dhe Afkju Horizontal cutting unit Solid wood edges up to 15 mm Inspection by appointment.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Gedpjwka Ntofx Afkjiu Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Gedpfx Afsy Egkgskjiu Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg Giedpeych Igofx Afkju 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), functionality: fully functional, Surface planer HA 4 Planing width: 450 mm Total table length: 2500 mm Infeed table: 1500 mm Machine height: 820 mm Max. chip removal: 15 mm Cutterhead speed: 4800 rpm Motor power: 4 HP Weight: 660 kg 3-knife cutterhead Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for business customers upon sale. Giodpfjinkfnjx Afkou

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Pressing area: 2600 x 1350 mm Gold-anodized pressing surfaces Giedpfx Afjzb H Rqekeu