Veneer press

ORMA NPC-30 4-40 2500 x 1200

Condition: used, Used machine Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm Dsdpfx Ahowpm I Hogjci - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dodpfoh Tfqhjx Ahgoci Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, functionality: fully functional, working width: 3,000 mm, HOT PRESS MANNI Djdpfex Rqtiex Ahgoci - Platen dimensions 3000x1300 mm - N. 6 cylinders - Boiler with hot water - wooden waste

Condition: refurbished (used), functionality: fully functional, Refurbished, six-piston hydraulic flatbed press of Italian manufacture. Branded veneer press for easy wood veneering, with warranty and service. Veneer sheet dimensions: 3000 x 1300 mm Pressure at full surface: 2.5 kg/cm2 Total maximum pressure: 90 tons Number of hydraulic pistons: 6 MYLAR Teflon film on the plates Prepared for water-based plate heating Option to install a hot water boiler Price includes complete machine refurbishment Dcodpfx Ahsvvbbcogei Price: 12,000 EUR (excluding VAT) The machine is refurbished, adjusted, and tested. The condition of the refurbishment and the machine's readiness for delivery must be verified in advance! In stock: Telnice near Brno, Czech Republic Testing, demonstration of the machine, and operator training are standard.

Year of construction: 2021, condition: new, NIVEAU - Lifting table HS 300 midi with SCHWENKMAX - Plate swiveling device description: ᐳ mobile single scissors lifting table with plate ground frame and 4 drilling holes to receive the socket pins; 4 pieces of guide rollers, 2 of them with brake; Ø of rollers: 125 mm; operation on foot pump; load in kg: 300 weight in kg: 85 stroke in mm: 610 height in mm: 400 overall height in mm: 1010 sizes of platform in mm: 1200 x 740 Inclusive ! Schwenkmax - Plate swiveling frame Dcodpfxsb Irfcj Ahgoi with 2 layers of lock (vertical/horizontal) for plate weight up to 120 kg The swiveling frame can be mounted on the base frame of the HS 300 midi with a few simple steps. Even large boards can be rotated by this quipment from one person with no effort from the vertical to the horizontal position. Size of swiveling frame 1800 x 1480 mm Further optional available Accessories : * work plate beech tree Multiplex, 30 mm thick * wooden breadboard made of beech tree Multiplex, 30 mm thick

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Dcodpfx Ahofguntegji Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: good (used), Obel Pedersen High-frequency continuous belt press Opel-Pedersen press, type 2412 Press length 2500 mm, width 600 mm with glue application system, stacking table, HF generator T20 V and water cooling Dedpjdybr Rjfx Ahgeci System has been dismantled.

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar Dcedpfxsxaxr No Ahgei 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set

Condition: new, Type DC9030 Air delivery 3900 m³/h Dcodpfx Aofiiwuehgoi Inlet diameter 3x100 mm Fan diameter 300 mm Bag capacity 307 l Collector bag ø 480 × 4 3 phases Motor power 2.2 kW Weight 63 kg

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Dedpoy Nkuwefx Ahgjci Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500