Hydraulic veneer press

NARDI MODU 3000 x 1300

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes Bwedewqdbmopfx Ad Iju No. Operating units: 4 Nr

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Bwedpfx Aet Uduxed Isu

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Bwsdpfjw Naanox Ad Isu Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Year of construction: 2021, condition: new, Overband plate magnet from remaining stock / overproduction Manufactured from stainless steel 1.4301, hermetically sealed. For sale: a plate magnet with threaded holes on the back. The magnet can be used as a "police magnet" or to filter out metal contaminants above a conveyor belt. Ring eyelets for suspension are included. Dimensions of the magnet block: 620 x 420 x 250 mm Only 1 unit available for immediate delivery. Many other dimensions available in stock. Bedpfxefktk Hj Ad Ijwu

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Bedpfxswx Rrne Ad Iowu Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. Bwsdpfjuak Nlsx Ad Iou This is not part of the offer price.

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Bwjdeyr Tx Aopfx Ad Ieu Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: new, Year of construction: 2026, Two-Shaft Shredder GL32120 – 30 kW + 30 kW – NEW SHREDDER EQUIPPED WITH HYDRAULIC PRESSURE (PLEASE REFER TO THE ATTACHED TECHNICAL DRAWING OF THE MACHINE) GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new industrial two-shaft shredder, 3E Machinery GL32120, equipped with two independent drives, each with a power of 30 kW. The machine operates at low speed and high torque, making it suitable for demanding industrial applications and shredding a wide range of materials. TECHNICAL SPECIFICATIONS: Model: GL32120 Type: Two-shaft shredder Motor power: 30 kW + 30 kW Rotor length: 1,200 mm Rotor diameter: 430 mm Number of knives: 30 pcs. Knife thickness: 40 mm Shredding chamber dimensions: 1,212 × 736 mm Machine dimensions (L × W × H): 3,650 × 1,346 × 2,275 mm Weight: approx. 5,200 kg Control system: electrical control cabinet with Siemens PLC Condition: Brand new APPLICATIONS: The GL32120 two-shaft shredder can be used for shredding various materials, including: plastics, industrial waste, Bodpfsvpuafsx Ad Iewu wood and pallets, electronic waste, barrels and containers, municipal waste, paper and cardboard, metal-containing waste, used tires, and many other materials intended for recycling. The robust design and low-speed, high-torque shredding system make the GL32120 an excellent solution for heavy-duty recycling applications. The modular construction of the shredding chamber provides easy access to the main components for maintenance and servicing. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and recycling lines: GrabTrade – shredding and recycling machines.

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 100,000 l, storage tank 100.000 litre volume for heating oil, diesel or HVO Bwsdpfx Aji A Hx Iod Iju

Condition: used, Year of construction: 2001, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A Bwsdpfx Adextakms Iou - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse