Used Scheer Zf 630 for sale (67)

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood. Features automatic feed and return of the saw carriage, continuously adjustable feed advance, saw blade height, and cutting length. Equipped with a pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, 3-phase brake motor 6.8 HP / 5 kW and scoring unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm. The machine is in good condition and ready for immediate use, located at Neustadt/Weinstr. Transport available at extra cost! Dkodpfxoyzxkwo Ag Dek

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Depth: Max. 40 mm Up to 2 panels per cut Central bore: 7–10 mm Possible center bore: 15–35 mm Drill motor BM 602 Dkedpfjyy St Asx Ag Dsk Machine cycle times: Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Scheer FM 2-3000 Veneer Saw, Splicing and Fine Cutting Saw Type: FM 2-3000 Motor: 2.5 HP Machine No.: 199540 Cutting length: 3000 mm Dodpfjxf Tqwex Ag Dokk Saw blade diameter: 180 mm Rear support table Weight approx. 300 kg.

Year of construction: 2008, condition: good (used), functionality: fully functional, Used strand granulator Year of manufacture: 2008 Dkjdpfx Ashfmrteg Dek Scheer SGS 100-E4 Condition: good, functional tested Available immediately

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Dodpfxsyy I Sns Ag Dokk

Condition: good (used), functionality: fully functional, 2.5 HP motor, max. cutting height approx. 45 mm, saw blade diameter approx. 180 mm, depth to fence approx. 500-530 mm, fitted with extraction unit, rear fence table, support consoles/support table, pneumatic pressure bar / workpiece clamping, ex location. Shipping available at extra cost! Dodpfx Agsyu Sl To Dskk

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Dodpfovvkazex Ag Dekk Storage location: Nattheim

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Djdpevvkblsfx Ag Djkk Storage location: Nattheim

Condition: excellent (used), DB5 dowel hole drilling machine & row drilling machine - 21 drilling spindles - 32mm spindle pitch - 380 volts Dsdpfx Agjytvare Dskk - 2.2 kW - Dimensions: length 1400mm x depth 900mm x height 1300mm - 2 pcs longitudinal stops

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Dsdpeyxr T Tsfx Ag Dekk Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Universal dowel drilling machine with swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drill motor 2.2 kW with 21 spindles Spindle pitch: 32 mm with attached oil damper Height adjustment: 80 mm Drilling depth: 80 mm Weight: 420 kg Availability: short notice Djdpjyvl Hzefx Ag Dokk Location: Röllbach

Year of construction: 1998, condition: ready for operation (used), Technical Specification Max. Cutting Length 3100 mm This SCHEER PA 4136 panel saw was manufactured in 1998. It features a cutting length of 3100 mm, cutting height of 70 mm, and a saw blade projection of 77 mm. Equipped with a 7 kW main saw unit and a 1.1 kW scoring motor, it offers a saw feed speed of up to 40 m/min. Consider the opportunity to buy this SCHEER PA 4136 panel saw. Contact us for more information. Application Types Sawing (Wood) Dkedpox D E Dmefx Ag Djk

Condition: used, machine/vehicle number: 650597, Motor 1,65 kW Djdpjimd D Asfx Ag Dokk cutting length approx. 2450 mm saw blade diameter approx. 150 mm pneumatic tension space requirement approx. LxWxH mm 3000 x 1000 x 1600 ex location Seevetal, subject to prior sale, sold as seen, without transport

Condition: used, cutting length: 3050mm workpeace clamping: Handrad Dedpfx Aom H Uxysg Dokk suction connection: yes

Condition: used, Used machine Dkodpfsyncpisx Ag Dsk Equipment: - Cutting length 2500 mm - With handwheel tensioning Availability: short-term Stock location: 63934 Röllbach

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW machine weight ab. 500 kg Dkodjyku U Njpfx Ag Djk

Condition: used, Year of construction: 1992, Cutting length: 3100 mm Workpiece clamping: pneumatic Dedpfx Agoyl Tius Dekk

Condition: used, Year of construction: 1985, Scheer DB5 row drilling machine Year of manufacture: 1985 - 380 Volt - 21 spindles; 32 mm spacing - stop ruler Dkedpfjwv Uy Dsx Ag Dok - various dowel drills - portal opening 1056 mm - 2.2 kW

Year of construction: 1995, condition: ready for operation (used), A veneer jointing and fine cut sawing machine Scheer is available. Cutting length: 3100mm, cutting height: 45mm, max. saw blade diameter: 180mm, pressure beam opening height: 80mm, fence depth: 500mm, machine dimensions X/Y/Z: approx. 3750mm/1400mm/1300mm, weight: approx. 500kg. An on site inspection is possible. Dkjdpoyrg Haofx Ag Dok

Condition: ready for operation (used), A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible. Djdpfoyq R E Rjx Ag Djkk

Condition: ready for operation (used), Year of construction: 1989, cutting length (max.): 3,100 mm, Pneumatic pressure beam; rear stop Dsdpfxoyn Nr Do Ag Dskk

Condition: used, boring spindle 21 dividing 32 mm Dkedpfxewp E Uxj Ag Dek hollow max. 1.000 mm swivable pneumatisch °

Condition: used, Number of boring spindles 1 St. Motor output 1,1 kW Dkodpelfcnwofx Ag Dok Workpiece thickness ca. 100 mm Working width 650 mm Foot-operated drill machine Scheer type BM340

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW dimensions 4000 x 500 x 920 mm Djdpfxjr I E Hcs Ag Djkk weight 450 kg

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Workpiece clamping; pneumatic Dedpfx Aof Dlursg Dskk -Number of drills: 21 pieces. 32 mm grid -Bore head: swiveling -Bore depth: max. 80 mm -Height adjustment: max. 80 mm -Underframe: transport castors that can be steered on 4 pieces -Dimensions: 1090/1330 / H1460 mm -Weight: 433 kg