Used Turning Lathe for sale (9,160)

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Blsdpfxex Ik Twj Acvof subject to prior sale!

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope Bledpfx Acex I Simovsf of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) Bledpow Uf Hwefx Acvjf - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min Blsdpfsvh I Tvex Acvjf rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: used, Make: Schiess Bodpfx Ajxpd Emjcvjlf Control: Conventional Location: Germany Major overhauls: 2009 new electric with new AC main motor, 2022 overhaul of the gearbox. Condition: under power, in good condition Chuck Ø: 9500 mm Swing Ø: 10500 mm Max. Workpiece Weight: 150 T Max. Working Height: 4500 mm Ram Vertical Travel: 2250 mm Chuck Speed: up to 7.35 rpm Machine Weight: aprox. 400 T Left ram is currently dismantled but will be supplied together with the machine.

Condition: good (used), Year of construction: 2012, operating hours: 22,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Brand: STAR Model: SR-32J Year: 2012 with: FANUC 32i control Backworking unit Blodjyu Uhwjpfx Acvof Synchronous spindle Driven tools C-axis Oil mist extraction system Fire suppression system FMB TURBO 3-36 bar feeder

Condition: good (used), Year of construction: 2013, operating hours: 35,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type lathe Make: STAR Model: SV-32 Year: 11/2013 with: FANUC 16i TB control backside machining synchronous spindle turret driven tools C-axis high-pressure pump fire extinguishing system Bedpfxsyu Nqys Acvjlf chip conveyor bar feeder magazine FMB TURBO 3-36

Condition: good (used), Year of construction: 2003, operating hours: 18,538 h, functionality: fully functional, machine/vehicle number: 431, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V Bljdpfeyh Ivlox Acvsf - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Position feedback resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Thrust force X/Z: 2,800/2,120 N - Position feedback resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Position feedback resolution X/Z: 0.0005/0.001 mm - Including all tool holders shown in the photos, as well as a chip conveyor and coolant system by Resy, and a bar loader by FNB, model: TURBO 5-42. Attention: The item must be collected bindingly on a to-be-agreed appointment between 01 and 02 April 2026. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm Blsdoyh Hkzjpfx Acvof - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: MLK 26F1.5 | Bljdoyxxdlspfx Acvof Year of construction: 2018 The machine can be inspected by appointment under power. Condition: Well maintained, fully functional / ready for use. Operating hours: approx. 28.797 hours. TECHNICAL SPECIFICATIONS: - Axes: 11 - Turning diameter over bed: 32 mm - Spindle bore: 32 mm - Channel 1/Z1 > Spindle stroke: 180 mm (short-run configuration), 340 mm (long-run configuration) - Main spindle speed: 6.000 rpm - Spindle motor power: 5.5 / 3.7 kW - Channel 2/Z2 > Turning length (counter spindle): 340 mm - Counter spindle speed range: 8.000 rpm - Clamping chucks: 1536E - Drive motor power: 5.5 / 3.5 kW - Total power requirement: 28,7 kW, 60 A - Machine weight approx.: 4,4 tons - Space requirements: approx.: 8,0 x 2,7 x 2,1 m SPECIFICATIONS: - CNC control: FANUC 31i-B - 1 counter-spindle - NC C-axis on main and counter-spindles - Tool holders for 5 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, make: FMB Turbo Ø 3–36, year of manufacture: 2018 Guide channel DM12 - Chip conveyor - Electronic handwheel - High-pressure system, make: KNOLL, 50 bar with paper belt filter system - Fire protection system, make: KRAFT & BAUER - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, CNC-Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: ML 20 C5Y2 Basic | Year of construction: 2020 The machine can be inspected by appointment under power. Condition: Fully functional, well-maintained / ready for use. Operating hours: approx. 19.498 h TECHNICAL SPECIFICATIONS: - Axes: 8 - Turning diameter over bed: 32 mm - Spindle bore: 20 mm - Channel 1/Z1 > Spindle stroke: 220 mm - Main spindle speeds: 8.000 rpm - Spindle motor: 5.5 / 3.7 kW - Tailstock bore: 20 mm - Tailstock speed range: 8.000 rpm - Channel 2/Z2 > Turning length (counter spindle): 240 mm - Clamping chucks 161E - Drive motor power: 5,5 / 3,5 kW - Total power requirement: 19,4 kW / 35 A - Machine weight: approx. 4,2 tons - Space requirements: approx. 8,0 x 2,7 x 2,2 m EQUIPMENT: - CNC-Control: FANUC 31i-B Bljdpfxsyxw Ips Acvof - 1 x counter-spindle - NC C-axis on main and counter-spindles - DM12 guideway - Tool holders for 5 fixed turning tool holders, cross-section 12 x 12 mm - Bar loader, FMB Turbo model, Ø 3–36, year of manufacture: 2020 - Chip conveyor - Electronic handwheel - KNOLL high-pressure system (50 bar) with paper belt filter system - Fire protection system, Brand: Kraft & Bauer - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Year of construction: 2005, functionality: fully functional, TECHNICAL DATA Spindle Head Max. bar stock diameter (mm): 13.0 Material quality (DIN 671) (mm): Ø Xh9 Collet chuck, selectable: Through-bore Guide bush, selectable: Through-bore Max. turning length / spindle stroke: • with fixed guide bush (mm): 130 • with rotary guide bush (mm): 80 • with programmable guide bush (mm): 80 Spindle speed (rpm): 12,000 C-axis electronic resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 Slide travel X1 (mm): 35 Slide travel Y1 (mm): 38 (-10 +28) Rapid traverse X1 / Y1 (m/min): 15 Tool stations (number): 6 (12) Turning tool cross-section (mm): 8x8 or 12x12 Clamping diameter for driven drilling tools (mm): 0.5 - 7 Chip-to-chip time (s): 0.3 Tool Carrier 2 Slide travel X2 (mm): 35 Slide travel Z2 (mm): 50 Rapid traverse X2/Z2 (m/min): 15 Tool stations (number): 6 Turning tool cross-section (mm): 8x8 or 12x12 Clamping diameter for driven drilling tools (mm): 0.5 - 7 Chip-to-chip time (s): 0.3 Tool Drive for Tool Carrier 1 and 2 Speed (rpm): 0...8000 Max. driven tools (number): 2x6 Clamping diameter for drilling tools (mm): 0.5 - 7 Sub-Spindle / Front Unit Max. bar stock diameter (mm): 13.0 Max. longitudinal stroke Z3, Z4 / X3 (mm): 140 | 228 Rapid traverse Z3, Z4 / X3 (m/min): 30 Tool stations (number): 4 Spindle speed (rpm): 12,000 C-axis electronic resolution (deg): 0.001 Rear Tool Unit, Slide/Fix Stroke Z, slidable with working spindle (mm): 80 Tool holder diameter (mm): 20 Tool stations (number): 3 Rear Tool Unit (X4-axis) Stroke X4 (mm): 39 Rapid traverse speed (m/min): 15 Tool holder diameter (mm): 28 Tool stations (number): 4 Tool Drive for Rear Tool Unit (with X4-axis) Speed (rpm): 0...10,000 Max. driven tools (number): 4 Clamping diameter for drilling tools: • driven (mm): 0.5 - 7 • stationary (mm): 0.5 - 10 Coolant System Pump pressure single stage (bar): 3 Bsdpfxoyr N Dze Acvelf 120 bar pump for front/rear unit Tank capacity (l): 180 Delivery rate (l/min): 40

Condition: ready for operation (used), Year of construction: 2001, operating hours: 43,436 h, functionality: fully functional, machine/vehicle number: 0298 (029), turning length: 205 mm, spindle speed (max.): 10,000 rpm, type of input current: AC, total width: 2,785 mm, total length: 2,810 mm, total height: 4,578 mm, bar diameter (max.): 20 mm, input voltage: 400 V, empty load weight: 4,121 kg, DGUV certified until: 01/2026, load capacity per storage section: 250 kg, Equipment: documentation/manual, We are selling our 9-axis CNC Swiss-type automatic lathe! The machines are in good condition, well-maintained, and fully operational. Control model: Fanuc 16i-T Number of axes: 9 Axes: X / C1 / Y / E / B / A / X / C2 Max. bar diameter: 20 mm Max. turning length: 205 mm Bodpfoyxv Uusx Acvolf Max. main spindle speed: 10,000 rpm Max. counter spindle speed: 10,000 rpm 3 cross drilling units, 5,700 rpm MACHINE DETAILS: - Control: Fanuc 16i-T - Coolant: Oil - Tank capacity: 170 L - Operating hours: 43,436 EQUIPMENT: - 5-position tool holder - 3 cross drilling units - Turret with 8 stations - Various additional tool holders - Parts conveyor belt - FMB Turbo 3-26 /3200/B bar feeder - Chip conveyor Can be collected at any time in Königsbach-Stein, Baden-Württemberg.

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm Bljdpfx Acjytn Emovof FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Bedpeyn Imyefx Acvslf Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC-Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: ML 32E | Year of manufacture: 2016 The machine can be inspected by appointment under power. Condition: Very well maintained, fully functional / ready for use. Operating hours: approx. 33.720 h TECHNICAL SPECIFICATIONS: - Axes: 11 - Turning diameter over bed: 32 mm - Spindle bore: 34 mm - Channel 1/Z1 > Spindle stroke: 220 mm Blsdpoyw Trnsfx Acvsf - Main spindle speed: 6.000 rpm - Spindle motor: 5.5/3.7 kW - Tailstock bore: 32 mm - Feed rate: 32 m/min - Tailstock speed range: 8.000 rpm - Channel 2/Z2 > Turning length (Counter spindle): max. 340 mm - Channel 3/Z3 > Turret: 160 mm - Clamping chucks: 1536E - Drive motor power: 5.5/3.5 kW - Total power requirement: 28.7 kW, 60 A - Machine weight approx.: 4.4 t - Space requirements approx. 8.0 x 2.7 x 2.3 m SPECIFICATIONS: - Control system: FANUC T31i - 1 Counter spindle - NC C-axis on main and counter spindles - Tool holders for 6 fixed turning tool holders, cross-section 12 x 12 mm - Bar loading magazine, manufacturer: FMB Turbo Ø 3–36, year of manufacture: 2016 Guide channel DM12 + DM25 - Chip conveyor - Electronic handwheel - High-pressure system, manufacturer: KNOLL (pump 1: 1–120 bar, pump 2 up to 50 bar) with paper belt filter system - Fire protection system, manufacturer: KRAFT & BAUER - WPM4 - Tool and process monitoring "Genior Modular - Fully automatic tool and process monitoring" - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 32 mm, turning diameter: 320 mm, center height: 160 mm, turning length: 650 mm, three-jaw chuck diameter: 160 mm, For sale here is a lathe from Voest Alpine in good condition! See pictures Manufacturer: Voest Alpine Model: DA-160 Centre height: approx. 160 mm Centre width: approx. 650 mm Turning diameter over bed: approx. 320 mm Turning diameter over cross slide: approx. 190 mm Spindle bore: approx. 32 mm Three-jaw chuck diameter: approx. 160 mm Tailstock holder: MK3 Accessories included: Four-jaw chuck Ø 160 mm, 6x steel holders, 4x pairs of turning jaws External dimensions of machine: approx. 150x90x180 cm (LxWxH) Bljdpjwq Ehbefx Acvof The machine can be inspected and tested at our premises. Loading option: with stapler or crane Shipping costs on request (by postcode) You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale ex location 42855 Remscheid, free loaded. Errors in technical data and prior sale reserved.

Condition: excellent (used), Year of construction: 2020, operating hours: 7,341 h, functionality: fully functional, CNC Swiss-type automatic lathe Bodpfjx Sx T Tox Acvolf Make: STAR Model: SX-38 Type A Year: 2020 Equipped with: FANUC 31i Model B5 control, synchronous spindle, powered tools, Y2-axis, Y3-axis, 2x C-axis, X2-axis, X3-axis, B-axis (programmable on linear carrier), independent back machining (8 stations), turret, swarf conveyor and swarf trolley, parts conveyor belt, fire extinguishing system, oil mist extraction, JBS guide bushing unit, can be used as both long and short turning machine, high-pressure pump, bar feeder FMB TURBO 5-65

Condition: good (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged. Blsdpfoyx T Ifox Acvef

Condition: used, Year of construction: 2019, turning diameter over bed 32 mm spindle passage 32 mm control SIEMENS 840-D-SL spindle stroke 220 mm main spindle speeds: 6000 U/min spindle drive 5,5 / 3,7 kW Sub - spindle - bar diameter 32 mm turning speed range sub spindle 8000 U/min turning length 220 mm collets 1536E motor power 5,5 / 3,5 kW total power requirement 16 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 6,40 x 1,60 x 2,10 m MAIER Swiss lathe in very good condition with SIEMENS 840-D-SL 3-channel control system, equipped with: - 2 counter spindles - NC C-axis on main and both counter spindles - Additional 3rd channel in the form of a second counter spindle - Channel 1 with Y1 and 4 driven tool holders - Channel 2 - Back side machining, tool carrier with 4 driven and 4 fixed tool stations - Tool holders for 4 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, manufacturer FMB Turbo Ø 3-36 / 3200 C - Stack magazine for holding a complete bundle of bars - Chip conveyor - Electronic handwheel - KNOLL high-pressure system 50 bar with paper belt filter system - Fire protection system, manufacturer KRAFT & BAUER - Table for removing long parts - Removal of long parts (flange + pipe) - ARTIS - Tool and process monitoring “Genior Modular fully automatic tool and process monitoring” The machine can be inspected under power! Bodpfsytx Skjx Acvelf

Condition: like new (used), Year of construction: 2022, spindle bore: 26 mm, bar diameter (max.): 36 mm, operating pressure: 100 bar, We are offering this as-new HANWHA XD26II H sliding head lathe, year of manufacture 2022. Manufacturer: HANWHA Model: XD26II H Year of manufacture: 2022 - FMB 3-36 bar feeder - Büchele SFB 300 high-pressure system - 100 bar - CO2 fire extinguishing system Kraft+Bauer valid until Dec. 2025 - Collection tray Blodpfx Aeywxbhjcvof If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine Bljdslzm Eqjpfx Acvef weight 2500 kg

Condition: used, spindle passage 12 mm Control Fanuc type LB 2 bar loader FMB weight of the machine ca. 1,4 t The tech. Data are manufacturer or operator information and therefore non- Bsdpfxjyt R Hae Acvelf binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2005, TECHNICAL SPECIFICATIONS OF THE MACHINE WORKING DIMENSIONS Table diameter: 1,300 mm Maximum turning diameter: 1,500 mm Minimum internal turning diameter with boring bar: 450 mm Maximum turning height: 1,700 mm Vertical travel of the ram: 1,000 mm Vertical travel of the crossrail: 1,400 mm Height from faceplate to floor: 970 - 5 mm Number of tool turrets: - 700 mm Tool holder shank section: 40 x 40 mm Ram tool holder section: Square 280 - 300 Machine weight: 27,000 - 30,000 kg Tool model: TOOL CAPTO & ISO50 GENERAL DATA CNC control: SIEMENS 840DD Number of columns: 1 Total machine length (depth) approx.: 4,500 mm Machine width approx.: 5,600 mm Machine height approx.: 6,350 mm Number of T-slots for flange clamping: as per ROHM faceplate T-slots: as per ROHM faceplate Number of slots for jaw mounting: 4 Maximum admissible table load: 5,000 kg Maximum table torque: 2,165 kgm Maximum cutting force: 4,500 kg FEED RATES - WORKING FEED "X" axis slide: 0.1 - 3,000 mm/min "Z" axis ram: 0.1 - 3,000 mm/min Crossrail bridge: 6 / 600 mm/min "C" axis table (milling): 0 - 3 rpm "C" axis table (turning): 0 - 400 rpm - RAPID TRAVERSE "X" axis slide: 7,500 mm/min Bjdpfx Asyyc Anecvslf "Z" axis ram: 5,000 mm/min Crossrail bridge: 600 mm/min

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm Bodjx Irzvopfx Acvolf 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor