Used Face Lathe for sale (6,344)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Kwedpfx Aaoyvt H Aolsw Includes documentation. Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Year of construction: 1979, condition: good (used), For sale comes: 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Ksdpenl D U Ssfx Aalsww Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Free location Saxony

Condition: good (used), Year of construction: 1968, functionality: unexamined, turning diameter: 1,500 mm, For sale: 1 used head lathe / facing lathe Manufacturer: Heyligenstaedt GmbH Werkzeugmaschinenfabrik Kwodor Nzm Topfx Aaljw type: 505ev/500 YEAR OF MANUFACTURE: 1968 Diameter face plate: 1.500mm incl. documentation The machine can be inspected in our warehouse in 09599 Freiberg.

Condition: good (used), Year of construction: 1971, turning diameter over bed 1070 mm turning diameter over slide rest 800 mm turning length 1000 mm turning dia. in gap 1450 mm faceplate 1000 mm length of gap 150 - 650 mm spindle bore 80 mm spindle turning speed range 4,25 - 190 U/min Kjdpfx Aeyq Smpjaleww feeds 0,05-2,8 / 0,03 - 1,7 mm/U drive motor 11 kW swing dia. 1450 mm total power requirement 13 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,1 x 1,3 x 1.6 m

Condition: ready for operation (used), Centre height: 700 mm Centre distance: 1800 mm Max. swing diameter over bed/in gap: 1300/1740 mm Turning diameter over cross slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Cross slide adjustment: 350 mm Kodpfeyn Ed Njx Aaljww Electrical connection: 380 V, 6.6 kW Weight approx.: 5.5 t Required space: 3800 x 1600 x 1700 mm

Condition: used, Year of construction: 2008, Out of valve production * Kjdpeynkgvsfx Aaleww

Condition: used, Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, We offer a used face turning lathe PORĘBA TR-100C in good technical, fully working condition. Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm Kwedpfx Aaoydpvzslow - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants

Condition: used, Year of construction: 1961, faceplate diameter 3500 mm turning diameter 4000 mm centre distance 16000 mm turning speeds 0,71-33,5 U/min Ksdpfx Aasyqvczsleww Rest 2 max. workpiece weight -without tailstock 6300 kg max. workpiece weight between centres 18000 kg total power requirement 31 kW weight of the machine ca. 60 t dimensions of the machine ca. 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, faceplate diameter 2000 mm Kedpfx Aasyqtgqsljww turning diameter 2500 mm turning speeds 0,5-100 U/min max. workpiece weight -without tailstock 6000 kg max. workpiece weight between centres 25000 kg turning diameter in the pit 3200 mm total power requirement 55 kW dimensions of the machine ca. 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Model 6 P 3150 mm 22000 kg 8000 kg 5000 kg Kwjdpfxoyr S D Dj Aaljw 250 mm 300 mm 2235 mm Faceplate diameter minus 150 mm 1900 mm 300 mm 380 mm 120 mm Nominal size 100 18 0.71-35.5 rpm 1-50 rpm 1.4-71 rpm 5000 mkg 28 kW 38 HP 38 kW 52 HP

Condition: used, Year of construction: 1970, faceplate diameter 2000 mm turning dia. in gap 2400 mm Kwsdpoydqpcefx Aalsw length of gap 200- 630 mm travel -x axis 1700 mm travel -z axis 400 (+550) mm faceplate turning speed range -stepless- 5- 180 U/min centre height over plate 1140 mm diameter of main spindle 285 mm spindle bore 90 mm Control S 840 D max. workpiece weight 5000 kg max. torque on the faceplate 3000 Nm total power requirement 57 kW weight of the machine ca. 20 t dimensions of the machine ca. 5,5 x 3 x 2,8 m Machine was reconditioned and modernized in 2015 with Siemens 840 D CNC control. Originaly it was built in 1980.

Condition: used, turning diameter over slide rest 800 mm Control Siemens 802D swing diameter 2000 mm centre height 1000 mm Ksdpfx Aev H Etdealeww

Condition: used, Year of construction: 1953, turning length / mm turning diameter over plate // mm faceplate diameter / mm Plane disc diameter: approx. 3600mm Centre height above plate: approx. 1500mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: approx. 2400mm Max. Workpiece weight: 22000kg Max. Torque on the faceplate: 5000 mkg Kodpfx Asua Iw Tsaloww Faceplate gear rim pitch circle diameter: 1900mm Main spindle bore: 120mm Speed range normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Total power: 38kW Total weight: approx. 42.5 tonnes

Condition: used, Technical details: faceplate diameter: 1500 mm center height: über Fundament: 1250 mm revolution per minute: 2,1 ... 96 / 12 step U/min feed min/max: 0,3 ... 2,5 / 18 step mm/min. spindle bore: Ø 82 mm Kwodou Ix Sgepfx Aaljw tailstock adjustment - manual: quer: 55 mm tailstock quill stroke: 400 mm tailstock taper MT: 6 weight of the machine ca.: 15 t dimensions L x W x H: Spindelkasten: ca. 2,0 x 1,6 x 2,1 m dimensions L x W x H: Support: ca. 6,0 x 2,1 x 1,6 m Stand support with bed slide: -bed slide travel 4,300mm motorized -cross slide 1500mm -Cross slide 600mm -Top slide 250mm -Tool holder with clamping claw Bed guide dimensions LxW: 6000 x 1500mm 4 base plates each 6000x2050x200mm *

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, The face turning lathe PORĘBA TR-100C has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Kodshyg Iyopfx Aalsww Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration

Condition: excellent (used), Planspiral.lathe chuck Auto Strong Diameter 310 mm Mounting Camlock size 8 Cone diameter 139,735 6 stud diameter 25,4 Pitch circle diameter 171,4 Chuck height including flange 135 mm Weight 53 kg Kjdpfx Aaeln Uixjlsww

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm Kjdowtctyspfx Aaleww spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

Condition: used, Year of construction: 1975, Technical details: Kjdjvbhiqjpfx Aaljww faceplate diameter: 3150 mm working area: Ø 4000 mm centre distance: 8000 mm center height: 2240 mm spindle bore: 100 mm revolution per minute: 1,4 ... 71 U/min max. torque on the spindle: 6300 kpm / ca. 61.781 Nm kpm / Nm feed range: plan+längs: 0,355 ... 31,5 / 14 step / R20/3 mm/min rapid traverse speed: 2,0 m/min tailstock quill taper MT: Größe 100 tailstock travel: 400 mm max. workpiece weight between centres: 20.000 kg max. workpiece weight -without tailstock: 8.000 kg main drive motor: 34 kW weight of the machine ca.: 44,1 t space requirements approx. LxWxH: 8,0 x 4,7 x 2,72 m Delivery consists of the following components: Headstock with faceplate and main drive 2x support Tailstock Plate fields (3x3.0 meters in a row and 4 additional plate fields) 1x steady rest Ø approx. 350mm 1x steady rest Ø approx. 650mm Support travel (large) X=550mm and X0=220mm / Z=2600mm and Z0=400mm Support travel (small) X=170mm and Z=340mm i.D. *

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, travel distance X-axis: 1,700 mm, travel distance Y-axis: 400 mm, controller model: Siemens 840 D, No reserve price – guaranteed sale to the highest bidder! The machine underwent a full overhaul in 2015 and was retrofitted with a Siemens 840 D CNC control system! Ksdpex Db S Tsfx Aaljww TECHNICAL DETAILS Faceplate diameter: 2,000 mm Turning diameter over table: 2,200 mm X-axis travel: 1,700 mm Z-axis travel: 400 (+550) mm Stepless faceplate speed range: 0.28–160 rpm Center height over table: 1,140 mm Main spindle diameter: 285 mm Spindle bore: 100 mm Torque at faceplate: 25,000 Nm Max. workpiece weight: 5,000 kg MACHINE DETAILS Control: Siemens 840 D Total power requirement: 75 kW Dimensions & Weight Space required: approx. 6 x 3.5 x 3 m Machine weight: approx. 21 t

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle Ksdsu Axzkspfx Aaleww - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: ready for operation (used), functionality: fully functional, turning length: 3,000 mm, turning diameter over cross slide: 600 mm, spindle speed (max.): 600 rpm, swing diameter over bed slide: 1,200 mm, center height: 600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 28/07/2025 and 31/07/2025. Ksdpfx Aswvi Txealjww TECHNICAL DETAILS Swing diameter over cross slide: 600 mm Turning length: 3,000 mm Swing diameter over bed slide: 1,200 mm Center height: 600 mm Spindle speed: 20 – 600 rpm Faceplate diameter: approx. 1,500 mm Control system manufacturer: FAGOR MACHINE DETAILS Overall height: 2,500 mm Overall length: 6,000 mm Overall width: 2,500 mm Total weight: 10,000 kg EQUIPMENT - General overhaul by KLAAßEN in 1999 - Faceplate (included): Ø 1,200 mm - With tailstock and boring bar holder

Condition: excellent (used), diverse lathe chucks and face plates as shown in the pictures Kwsdpfx Aofr T N Uoalew

Condition: good (used), two very well-preserved faceplates Kwedpfx Aeyt Ed Healsw

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-800/2 Ksdpfxox R U Nhe Aaloww Year: 1997 Condition: Used Stock number: 0376 Maximum upper slide pressure: 800 tons Number of pressure points: 2 cylinders Slide dimension: 1,350 mm Table dimension: 1,800 mm Die height at BDC: 450 mm Die mounting plate size: 3,200 x 2,200 mm Slide size: 3,200 x 2,200 mm Lower blank holder stroke: 510 mm.

Condition: used, 2 clamping plates for KK 8, ribbed cast iron plate, diameter 800 mm and 780 mm Kjdpjyr R Diofx Aaljww