Used Turning Lathe for sale (9,936)

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft * Todjw Dufiepfx Ac Tsb

Condition: excellent (used), !!!DEMO MACHINE!!! For sale: a Drechselmeister MIDI 2 Plus lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Center height approx. 178 mm / Swing diameter 355 mm - Center distance approx. 400 mm (extendable with optional bed extensions) Tsdpfx Aszgr Sioc Teb - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 RPM - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) safety groove - Tailstock with interchangeable tailstock spindle 100 mm MK2, trapezoidal thread, and measuring scale! (Optional: interchangeable tailstock spindle with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, turning tool, woodturning, turning, machine Reference: R-D1618

Condition: excellent (used), As-new tool holders for DECO 20 - DECO 26 3 pieces - TORNOS fixed tool holders for X1Y1; X2Y2; X4Y4 ----- - Turning tool holder for 16x16 mm tools: - Price per holder: €180.00 each fits DECO2000 ø20 & 25mm, DECO 20 and DECO 26 Tjdpfsy Apn Aox Ac Teb 3 with front plate 1 without front plate ----- Shipping within Germany €12.00 Shipping within EU €25.00 Additionally, we have 6 spindle reduction sleeves: were used in DECO 26mm inside-ø 8.0mm; ø 12.0mm; ø 21.0mm; 3x ø 26mm outside-ø 30mm, thread M32x1.5, approx. 360mm length flange-ø outside 45mm x 9mm, 4x M4 threaded holes 2x 8 mm keyway Special price for all 6 reductions including shipping: €380.00 We are happy to send photos upon request; for this, we require your email address.

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a TEKNATOOL Nova Nebula 230 DVR woodturning lathe with a direct drive ranging from 50 to 4,000 rpm. The demonstration machine is in excellent condition. Technical specifications: - Center height: approx. 230 mm Tjdpey N R A Isfx Ac Teb - Maximum distance between centers: 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MT2 (Morse Taper 2) - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-position indexing system - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Forwarding delivery: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related keywords: woodturning lathe, lathe, turning machine, woodturner, woodturning, turning tools, wood spinning, turning, machine Reference: R-A0117

Condition: excellent (used), For sale is a Drechselmeister STRATOS FU-230 wood lathe with a centre distance of approx. 700 mm. This pre-owned machine is in very good condition. Technical data: - Centre height: 230 mm - Centre distance: approx. 700 mm (extendable!) - Headstock swivels and slides - Infinitely variable speed control - Spindle thread: M33x3.5 mm - 2 main speed ranges - 1.5 kW / 2 HP motor The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Tsdpfx Acoyfd Sto Tsb Related keywords: wood turning lathe, lathe, turning machine, wood lathe, turning, turning tools, woodturning, machining, machinery Reference: R-AT0IJ

Condition: excellent (used), functionality: fully functional, LATHE FOR WORKSHOP USE For sale is a Drechselmeister Twister FU 200 lathe with a center distance of 715 mm. This lathe, which was used in a workshop setting, is in very good condition. Technical data: - Center height 200 mm - Turning diameter 395 mm (with optional external turning attachment, 700 mm) - Center distance approx. 715 mm (optionally extendable) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove* - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 boring quill Tsdpfxozn Nm To Ac Tob - Motor 1.5 kW / 2 hp (connection 230 V) - Brake switch, 2-stage - Weight of base model 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, machine tool, woodturning lathe, turning, lathe tool, woodturning, turning, machine Reference: Turning at B.

Condition: excellent (used), We invite you to contact us for further information and to arrange a product presentation appointment Todpfswnxhpox Ac Tob

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Tsdom E I D Hjpfx Ac Tsb Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, type of input current: AC, Machinge is in perfect working shape. It is very quick machine, pick-up was remanufactured. Selling due to retirement in the future. The remaining machines, complete equipment will also be for sale in the future. Three cnc machines, two forklifts, etc... Tsdpfjnyiyasx Ac Teb Not all items are in the pictures because there is a limit of 15 photos. Contact for photos.

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Tsdpfx Acsku Aaae Tsb Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S Tsdpsyzxp Tjfx Ac Tsb DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: good (used), Year of construction: 2012, operating hours: 7,360 h, Doosan Lynx 220B CNC Slant Bed Lathe With Doosan-Fanuc I Series Control With Ø135mm Collet Chuck. Maximum Swing Ø510mm. Maximum Swing Over Cross Slide Ø290mm. Maximum Turning Ø320mm. Maximum Turning Length 305mm. Bar Capacity Ø51mm. Axis Travel 'X'=175mm, 'Z'=330mm. Rapid Feedrates 'X'=30m/min, 'Z'=36m/min. Spindle Nose A2-6. Maximum Spindle Speed 5,000rpm (15kW Motor). Spindle Nose A2-6. Spindle Through Bore Ø61mm. 12 Station Turret. Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. S/No. ML0014-005414 (2012). Low Running Hours 7,360. Tedpfszt R U Nox Ac Tsb With Coolant System, Tool Setter, Parts Catcher, Seoam CAH-08 3 Jaw Power Chuck, Tailstock, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,325 x W1,600 x H1,600mm. Weight 2,900kg.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Swing diameter over bed: 32 mm Tsdpfx Ajx U Tchoc Tob Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m Connection voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Connected load: 8.0 kVA

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Todod Ivynopfx Ac Tob Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 Todpswz Rifefx Ac Tjb CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: excellent (used), DEMONSTRATION MACHINE!!! For sale is a Drechselmeister Stratos ECO wood lathe with a center distance of approx. 680 mm. Tedpfjy Nm Rhex Ac Tsb The machine is in very good condition and has been refurbished and inspected by our qualified staff. (Fully functional) Technical specifications: - Center height approx. 230 mm - Swing over bed approx. 455 mm (up to 800 mm with optional outboard turning device!) - Center distance approx. 680 mm (expandable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Spindle speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight: 177 kg The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: wood turning lathe, metal lathe, lathe, wood lathe, turning, woodturning tools, woodturning, turning machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister MIDI 3 lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our specialist personnel. (Fully functional) Technical data: - Center height 190 mm / Turning diameter approx. 378 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) drain safety groove - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread, and scale! (Optional: Interchangeable quill with ER25 collet chuck system for drilling) - Motor 0.7 kW / 1 HP (230 V) with high-quality frequency inverter and “SAFE-START” function - Weight approx. 60 kg Tsdpezgr Nusfx Ac Tob The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, lathe tools, woodturning, machining, machine Reference: R-D1618

Condition: excellent (used), Year of construction: 2017, operating hours: 2,728 h, Doosan Puma GT2100 CNC Slant Bed Lathe With Doosan-Fanuc I Series Control Tjdpfezt R Ucex Ac Tob With Samchully MH-208 V1 Ø203mm 3 Jaw Power Chuck. Maximum Swing Ø600mm. Maximum Swing Over Cross Slide Ø390mm. Maximum Turning Ø390mm. Maximum Turning Length 562mm. Bar Capacity Ø65mm. Axis Travel 'X'=230mm, 'Z'=580mm. Rapid Feedrates 'X'=24m/min, 'Z'=30m/min. Spindle Nose A2-6. Maximum Spindle Speed 4,500rpm (18.5kW Motor). 12 Station Turret. Programmable Tailstock Travel 580mm, Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. S/No. ML0228-001618 (2017). Note: Low Running Hours 2,728. With Coolant System, Tool Setter, Parts Catcher, Ø165mm Collet Unit, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,940 x W1,632 x H1,700mm. Weight 3,500kg.

Condition: used, Year of construction: 2003, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. Todpfx Acjza Tumj Tob You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00446, turning length: 200 mm, spindle speed (max.): 15,000 rpm, controller model: Fanuc Series 31i, counter spindle speed (max.): 10,000 rpm, Equipment: bar feeder, TECHNICAL DETAILS Maximum bar diameter: 16 mm Maximum turning length: 200 mm Todpfoywu Ecjx Ac Tsb Main spindle speed: 15,000 rpm Sub-spindle speed: 10,000 rpm Main spindle drive: 2.2 / 3.7 kW Sub-spindle drive: 0.55 / 1.1 kW Number of axes: X1, Y1, Z1, Z2, C1, C2 MACHINE DETAILS Control unit: Fanuc Series 31i Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,610 x 1,050 mm Machine weight: 1,950 kg EQUIPMENT Fully functional C-axis on both spindles Bar feeder: IEMCA Genius 118 Type 37 LL Guide bushings (complete set) Fixed and driven tool holders High-pressure pump: 20 bar / 2 channels Comprehensive set of guide bushings Bushings for IEMCA bar loader in various diameters

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE-59 BIG lathe with a center distance of 1,000 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Motor 2.2 kW / 3 HP / 400 V - Speed levels: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height 250 mm - Center width 1,000 mm - Hand rest 350 mm - Direction of rotation switch - Spindle M33 x 3.5 mm with ASR (Euro) run-off safety groove - Spindle and tailstock cone MK3 - Hollow spindle D = 20 mm - Main spindle with 4 bearings - Quill travel 150 mm (with scale) - Total length 1,780 mm - Weight 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Tsdpfetpnddex Ac Tob If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, turning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Tsdpfx Acszdqdfs Tsb Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Make: STAR Model: SR-32 Year of manufacture: 1999 Tsdpfxjyzyr Nj Ac Tjb with: FANUC 16-T control Backworking capability Synchronous spindle Driven tools C-axis Bar loader magazine FMB TURBO 5-42

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 200 rpm, turning diameter: 32 mm, spindle bore: 39 mm, overall weight: 2,850 kg, rotational speed (max.): 8,000 rpm, rotational speed (min.): 8,000 rpm, type of input current: three-phase, bar passage: 39 mm, Space requirement: approx. 2.5 x 1.4 x 1.75 + FMB m CNC long-turning lathe: Citizen L32-1M8, year 2018, equipped with FMB turbo 3-36 bar feeder and a swarf conveyor with "0" operating hours. Tedpsy Emnfefx Ac Teb LFV function: not available ON/OFF: 5,465 hours (as of 2026.04.22) Operating hours: 32,110 hours (as of 2026.04.22)

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a HAGER HDG 250 lathe in mint condition with a center width of 1,000 mm. Tjdpotpnykjfx Ac Teb The exhibition machine is in original condition, therefore you have the full warranty. Technical data - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) safety groove - Spindle bore (diam.) 20 mm - Tailstock quill 150 mm / MK3 -Hand rest upper section 300 mm -Weight 270 kg -Length x width 1,800 x 640 mm - Motor 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, lathe machine, lathe, lathe, woodturning, woodturning machine, turning, woodturning knife, turning, machine, Hager Reference: R-A0117