Used Turning And Milling Centre for sale (23,598)

Condition: excellent (used), Year of construction: 2015, Maximum cutting diameter 640mm, maximum cutting length 1100mm, bar capacity 80mm, B axis -120/+105 degrees, C axis 0.001 degrees, Spindle power 18.5Kw, spindle speed 3,500 rpm, milling power 15Kw, milling speed 12,000 rpm, sub spindle speed 3,500 rpm, Itsdpfx Astt Nrteacon 40 station ATC, Y axis travel -/+ 125mm, Fanuc 31i control, magazine barfeed, swarf conveyor, parts catcher.

Condition: excellent (used), Year of construction: 2001, Gildemeister MF Sprint 65 Machine in excellent condition Hainbuch SK65 2 x turret with live tools Itodoxm Td Tepfx Aacen Low operating hours: 22,670

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 300 mm, turning diameter over cross slide: 20 mm, turning diameter: 20 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle bore: 20 mm, rotational speed (max.): 10,000 rpm, power: 30 kW (40.79 HP), Turning and milling center complete with bar feeder LNS HYDROBAR MINI SPRINT bar loader(Maximum bar length 3,000mm) DMG MORI SPRINT 20-8 Control: Fanuc 310i Main spindle speed: 10.000 rpm Power: 5,5 kW torque: 14 Nm bar passage: max. 20 mm C1 axis: 0.001 travel Z1 axis: 80 mm Counter spindle speed: 10.000 rpm power: 5,5 kW torque: 14 Nm C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Internal machining: 6 stations tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Itsdpfxsq Nmm Ee Aacen Rapid traverse in X/Y axis: 40/30 m/min Tool carrier II (Y) Technology: Linear slide internal machining: 4 stations tool holder: 20 mm External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck , ESX 16 Travel in Y2 axis: 120 mm rapid traverse in Y2 axis: 40 m/min MACHINE DETAILS weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Chip management: chip conveyor Coolant management: Coolant pump Fire extinguishing system: Kraft + Bauer Oil mist extraction: Interface prepared Further equipment: Signal lamp

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 305950, Robot manufacturer: KUKA Model: KR 60-3 - Payload 60 kg Serial number: 705389 Year 08/2018 Barfeeder Manufacturer: Iemca Itodpfxsvtba Hj Aacon Model: KID 80-16 Serial number: 021916QA06 Year: 2019

Condition: used, Year of construction: 1990, Used 20 mm Cold Forming Machine Manufacturer: Asahi-Okuma (Japan) Year of manufacture: 1990 Model: AF-2020-5 Station No.: 5 Cutting diameter: Max. 20 mm (tensile strength below 70 kg/mm²) Cutting length: 210-15 mm Projection length: Punch side projection: Max. 52 mm Main die x depth: 115 mm diameter x 250 mm Punch die x depth: 85 mm diameter x 150 mm Cutting die x depth: 80 mm diameter x 80 mm Ejector die diameter: 30 mm diameter Cutting die diameter x thickness: 80 mm x 40 mm Die center distance: 140 mm Crank stroke: 380 mm Transfer stage length: 210 mm Head piece net diameter: 45 mm diameter. Punch net diameter: 100 mm diameter. Force: 250 tons Production capacity: 100 units/min (max.) Main motor: 75 kW (6/8/12 poles) Itsdpfx Aasxlac Hscjn Machine weight: 75 tons Machine dimensions: 9.1 x 3.45 m

Condition: used, HANEX 17D SWISS TYPE LATHE MAKE HANEX, MADE IN KOREA MODEL 17 D YEAR 1997 CONTROL FANUC OT-CD MAX MACHINING LENGTH 210.0 mm MAX MACHINING DIA 17.0 mm MAX DRILLING DIA 7.0 mm SPINDLE RANGE 200 – 8,000 rpm SPINDLE MOTOR 1.1/3.7 kW SUB-SPINDLE 200 - 4000 rpm TOOL CAPACITY FOR OD MACHINING 8 TOOLS FOR ID MACHINING 3 TOOLS FOR BACK-END MACHINING 2 TOOLS SLIDE TRAVEL X AXIS: 32.0 mm Z AXIS: 210.0 mm T1, T2=105.0 mm B AXIS: 113.0 mm MACHINE DIMS 1500 x 980 x 1500 mm MACHINE WEIGHT 1050 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED Itodpfx Aaowidy Tscon RANGE OF TOOL HOLDERS RANGE OF COLLETS SET OF MANUALS

Condition: excellent (used), Year of construction: 2017, Mazatrol Smooth G Control, Bar capacity 65mm, maximum machining diameter 344mm, 2 off 12 Station Turrets, Itodpfx Aastt Nwiocjn 1325mm between spindles, C axis to both Spindles (0.0001 degree) Y Axis on both Turrets, Spindle Speed 5000rpm, Spindle Motors 22kW, Milling 6000rpm on both Turrets, Swarf conveyor, Tool Setter, Hydrafeed Magazine Barfeed

Condition: excellent (used), Year of construction: 2015, operating hours: 17,500 h, functionality: fully functional, machine/vehicle number: MA201301, feed length Y-axis: 112 mm, bar diameter (max.): 80 mm, overall weight: 15,000 kg, three turrets - threeY axis - 80 mm bar capacity - parts catcher gantry type -barfeed interface - very well tooled - low hours Itodpfx Aaot E A Acocen

Condition: used, Year of construction: 2007, Mecof Prima 3 Axis High-Speed Milling Centre with Rotary Head. Serial No. 30708 (2007) with Heidenhain iTNC-530 CNC Control, Travel X/Y/Z = 1650/1900/850mm, Table Size 1800 x 1500mm, 40 Tool ATC, Max Spindle Speed 30,000rpm, Spindle Taper HSK 62E, Feed Rate Max 100,000mm/min, Spindle Power 22kw, Renishaw Tool Setting. CE Mark Iodpfx Aaoxnm Ibocotn Please Note: Dismantling and Loading will be carried out by our own supplier. A charge of €11,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 157626, Manufacturer: Mazak Model: Integrex 200-2SY Controller: Mazatrol PC Fusion CNC 640 Robot NOT included Max. Machining diameter: 540 mm Iodpfx Aaevlxf Dscstn Max. Machining length: 1018 mm Spindlebore: 51 mm Spindlepower: 22 kW 5000 rpm Travel: X = 530 mm Z = 1065 mm Machine weight: 7800 kg. Machine dimensions: L=5200 x W=2500 x H=2750 mm

Condition: used, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, 2x Stama MC 734 MT 6-Axis Milling Machines with Robot Stama MC 734 MT (Machine number 5) Tool magazine with 48 positions on chain and 90 positions in auxiliary magazine Milling spindle: 12,000 rpm Tool holder: Capto C6 Control: Fanuc Series 31i-Model A5 Coolant system and chip conveyor Operating hours: approx. 48,974h Machining time: 19,357h Travel paths: X: 800 mm, Y: 520 mm, Z: 510 mm Rapid traverse: 60 m/min Stama MC 734 MT (Machine number 6) Tool magazine with 48 positions on chain and 90 positions in auxiliary magazine Milling spindle: 12,000 rpm Tool holder: Capto C6 Control: Fanuc Series 31i-Model A5 Chip conveyor Operating hours: approx. 16,482h Machining time: 14,456h Travel paths: X: 800 mm, Y: 520 mm, Z: 510 mm Rapid traverse: 60 m/min One coolant system for both machines. Västerås Robot: Itedpfjt Ri Ucjx Aacon One Stama machine requires repair. One axis needs to be overhauled. A cost estimate of €12,000 is available for this. Clara extraction system not included in the scope of delivery! More photos available upon request. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. All company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item are possible and subject to change.

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 YEAR 1997 CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm MAX. SPINDLE SPEED 9-2500 rpm TURRET 12 STATIONS TAILSTOCK YES Iedsv N D Rtopfx Aacstn SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS CLEAN

Condition: like new (used), Year of construction: 2022, maximum machining diameter 420mm, cutting length 603mm, bar capacity 102mm, spindle speed 4,000rpm, Isdpewnrvyjfx Aacjtn spindle power 30 Kw, milling speed 6,000rpm, milling power10Kw, sub-spindle speed 4,000rpm, , 12 station turret, Y axis -/+ 75mm, Smooth G control, swarf conveyor, tool setter,

Year of construction: 2001, condition: used, M01.43870 frequency 50 Hz voltage 400 V 24 V connected load 48 kW Itsdpfx Asrc Ip Sjacon rated current 63 A control Siemens 840 D turning diameter 250 mm turning length 100 mm weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm workpiece length - max. 100 mm

Condition: used, Year of construction: 2005, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: 175743, Hello, for sale is a Mazak QTN 100 CNC lathe. Machine Parameters: Model: QTN100 CNC Control: MAZATROL 640 T NEXUS Serial No.: 175743 Production date: 01/2005 Weight: 3600 kg / 2700 lbs Elementary diagram: D D0311070021 Main Circuit: 3AC 400V 50/60Hz Control Circuit: AC100V DC24V Main Motor: MAX. 31A 400V Rated Capacity: 24 KVA Max. turning diameter over slide: 280 mm Max. turning diameter: 309 mm The lathe was purchased in Katowice, Poland. It has very low operating hours as, due to the pandemic, there were no contracts. Operated on a single shift, unused since the pandemic started. Year of manufacture: 2005. Isdpfx Asxg Iw Ijacotn The machine is available for inspection by prior telephone arrangement. Located in Wrocław. Sold with an invoice. My asking price is 120,000 PLN net. If you are interested, please contact me at +48665393715.

Condition: used, Year of construction: 2018, turning length 650 mm number of spindle speeds 4.000 U/min x-travel 275 mm Z-axis (hobbing length without counter centers) 700 mm spindle passage 65 mm control SIEMENS SINUMERIK 840D SL CNC Turning and Milling Center | SPINNER TC600 65 MC Commissioned: The machine has only been used for machining plastic. Equipped with an extraction system for plastic and graphite including a shredder. - Short bar loader: Spinner Servoload 1500 - Spindle chuck: Hainbuch SK100 - Tool turret: VDI 30 - 16 tool stations, all driven - Speed of driven tools: 6000 rpm The machine is in a excellent condition and has only 9.466h power-on hours. The machine can be inspected under power. Itjdpfx Aow Eyktjacsn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 65MC | 65-MC | TC-600 | TC 65 MC

Condition: ready for operation (used), Year of construction: 1999, Takisawa EX-108 2 Axis CNC Turning Centre FANUC 21i-T Control Max’ Turning Ø 320mm X Axis Travel 180mm Spindle Bore 52mm 12 Station Block Turret 7.5kW Spindle Motor Spindle Range to 3500rpm Tool Setting Arm Collet Chuck Machine Multifeed ML1 Barfeed Iodpfxownd Iuj Aacotn Separate Transformer Electronic Handwheel Swarf Conveyor Turret Tooling as photographed Year of Manufacture 1999 For sale with Jet Machinery Ltd Jet Machinery Stock No: #78879 Machine Serial Number: NA Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use

Condition: excellent (used), Year of construction: 2018, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: -, turning length: 1,350 mm, turning diameter over cross slide: 715 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 106 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,350 mm, mount diameter: 12 mm, total height: 2,346 mm, total length: 4,088 mm, total width: 2,129 mm, swing diameter over bed slide: 950 mm, overall weight: 10,400 kg, High specification machine with Fanuc 32iTB control. Many options including SMW Autoblok steady rest on programable Servo base, coolant through steady, high pressure coolant, enlarged left hand door to allow 920 mm swing workpiece (950 mm max). Various other options. New cost in 2018 over £200k. Isdjvz Ab Uepfx Aacstn

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, Itjdpfxetmtkto Aacon 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Year of construction: 1970, condition: used, diameter 190 mm weight 120 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Isdpfx Aaohm Ub Iscetn

Condition: good (used), Mazak Integrex E-410H Multi-Tasking Lathe Mazatrol 640M Pro Control, 610mm Turning Dia Serial No. Iodpfjvgzuwjx Aacjtn 164385 (2003)

Condition: excellent (used), Year of construction: 2005, Doosan S400 CNC 2 Axis Turning Centre Fanuc Oi-TC Control Manufactured 2005 Tool Setting Arm 12” 3 Jaw Chuck 12 Station Turret Tail Stock Swarf Conveyor (Not photographed) Tooling as photographed. Bar Capacity 76.5mm Max Cutting Dia. 400mm Max Cutting Length 750mm Spindle Motor Power 22KW Spindle Speeds 3500rpm For sale with Jet Machinery Ltd Jet Machinery Stock No: #78861 Itsdpfx Aev Epzpeacsn Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2012, Bar capacity 51mm, maximum cutting diameter 255mm, Isdpfx Ajvzry Tjacjtn Y axis travel +/- 40mm, C axis to both spindles 0.001 degrees, 12 station upper & lower turrets, Spindle power 18kw, spindle speed 5,000rpm, milling power 18kw, milling speed 6,000rpm, Sub spindle travel 650mm, swarf conveyor, tool setter, parts catcher, collet chucks, tooling, magazine barfeed, & shaft unloader

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min x-travel 1000 mm Iedpfx Ajud Al Hoacjtn y-travel 500 mm z-travel 570 mm Control Siemens weight of the machine ca. 5000 KG

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, swarf conveyor Itodpfx Aasu Rb Snscon