Used Turn Mill Center for sale (20,340)

Condition: good (used), Year of construction: 2019, CNC Turning and Milling Center Machine type: Spinner TC 800 - 85 MCY Control: Siemens 840 D Shopturn Lhsdpfoxdc Suox Aa Esr Year of manufacture: 2019 Available from: immediately TECHNICAL DATA: Max. turning length: 900 mm Turning diameter: 500 mm Spindle speed range: 2,600 – 4,000 rpm C-axis Bar capacity: 85 mm Tailstock Travel: X-axis: 360 mm Y-axis: -55 / +65 +/- mm Z-axis: 900 mm Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: BMT 65 Equipment: Chip conveyor Electronic handwheel

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Lhodpfx Aasv Drigj Ejr Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring Lhodjxmhdnepfx Aa Eer - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table length: 400 mm, table width: 400 mm, TECHNICAL DETAILS Travel X-axis: 510 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Table size: 400 x 400 mm Maximum table load: 250 kg Table indexing: 4 x 90° (1 optional) Number of pallets: 2 Tool holder: SK40 / BT40 Tool magazine positions: 24 Maximum spindle speed: 15,000 rpm Spindle power: 10 kW Ljdjxqqtajpfx Aa Eohr Rapid traverse rate: 60,000 mm/min Number of axes: 3 MACHINE DETAILS Dimensions & Weight Dimensions (W x D x H): approx. 5,600 x 2,400 x 3,300 mm Machine weight: approx. 7,600–8,000 kg Power supply: 200/220 V, 50/60 Hz EQUIPMENT Chip conveyor Pallet changer ATC (Automatic Tool Changer)

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: R2D N2802, turning diameter: 32 mm, The machine is still powered but not operational. The turret sub-spindle is defective. Lhedexrdq Uspfx Aa Esr

Condition: used, Year of construction: 2005, functionality: fully functional, Mazak Quick Turn Nexus 200 CNC lathe (2005) Manufacturer: Mazak Type: Quick Turn Nexus 200 Universal 500 CNC Lathe Year of manufacture: 2005 Mazatrol 640T control Condition: used, under power, in production Max. swing diameter 675 mm Max. turning diameter 380 mm Max. turning length 511 mm Speed range 35 – 5,000 rpm Main drive power 26 kW Max. torque 350 Nm Spindle bore 76 mm Number of tool positions 12 Rapid traverse X-axis 30.0 m/min Rapid traverse X-axis 30.0 m/min Tailstock mount MK5 Tailstock stroke 525 mm Number of tools 12 Turret indexing time 0.2s Length 2473mm Width 1780mm Height 1840mm Weight approx. 5000kg Scope of delivery – 1 set of manuals – Machine feet – Automatic parts catcher conveyor belt – Swarf conveyor hinge belt Lhedpfxoxnngrs Aa Ejr – Collet chuck – 6x tool holders – High-pressure pump 20 bar – Tool Eye – Bar loader prepared Note: without LTA oil mist extractor

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, functionality: fully functional, machine/vehicle number: 11779, turning length: 700 mm, turning diameter: 250 mm, spindle motor power: 26,000 W, spindle speed (min.): 3,200 rpm, spindle speed (max.): 3,200 rpm, spindle bore: 65 mm, overall weight: 8,500 kg, incl. 2x Hainbuch/Ortlieb chucks, conveyor belt, swiveling measuring probe with 2 heads, MANUAL GUIDE_dialog programming, high-pressure pump 18 bar/20 l/min, SBS tool breakage monitoring and wear control. Machine year 2013 – Commissioned 05/2014 Good & well-maintained condition Original price approx. €300,000 Lhsdpfx Aaerdy Uqe Eer !!! ATTENTION -> Sale without loader!!!

Condition: good (used), Year of construction: 2015, Control Heidenhain Siemens 840 D SL Working area: 700 mm x 420 mm x 380 mm (x/y/z) Table size 840 x 420 mm BBT 30 Max. speed 10,000 rpm Direct position measuring system X,Y,Z External blown air Handwheel Nano package (increase in temperature stability) Renishaw measuring probe OMP 40-2 Automation interface incl. automation door on the left and preparation for hydraulic interface Chip conveyor (increased discharge height 1050 mm) IKZ 40 bar Additional coolant tank 400 l Coolant-blown air switchover Additional nozzles on the headstock and in the magazine Flushing in the work area via additional nozzles Flushing gun Oil and emulsion mist separator PROGRESSline Tropical package (active cooling unit for Control cabinet, spindle and spindle motor) 2-circuit clamping hydraulics with control panel Control cabinet lighting PLC project file Single load detection E1 closure BDE interface Electronic key system Max. table load 300 kg Tool changer: Number of tool positions 15 pos. Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Change time chip - chip 1.5 sec Feeds: Feed speed 1 - 60,000 mm/min. Rapid traverse 60 / 60 / 60 m/min Max. feed force 5,000 N Total power requirement 25 kVA Machine weight approx. 4.1 t Lsdevzahxjpfx Aa Ejhr Space requirement approx. 3.0 x 3.0 x 2.8 m

Condition: used, Year of construction: 2011, Lathe Mazak Quick Turn Smart 300, Year 2011 Control system: Mazatrol Smart Mazak Quick Turn Smart300 Operating hours: Not available Installation dimensions: 5x2.7x2.5 m Lhodpfx Aew E Eqlja Eer Maximum turning diameter: 420 mm Year: 2011 Maximum turning length: 560 mm CE certified Drive power: 22 kW Driven tools: No Turret type: 12-station Chuck size: Diameter 250 mm Lathe Mazak Quick Turn Smart 200, Year 2014 Control system: Mazatrol Smart Mazak Quick Turn Smart200 Operating hours: Not available Installation dimensions: 4x2x2.5 m Maximum turning diameter: 350 mm Year: 2014 Maximum turning length: 560 mm CE certified Drive power: 11 kW Driven tools: No Turret type: 12-station Chuck size: Diameter 200 mm

Condition: good (used), Year of construction: 2007, operating hours: 30,000 h, CNC Lathe Hardinge Quest 6/42 SP Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current: 78 A Ledpfx Aoxflproa Eshr Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Bar capacity: 42 mm Chuck size: 150 mm Max. workpiece length with collet: 381 mm Max. workpiece length with chuck: 270 mm Max. turning diameter: 309 mm X-axis travel: 89 mm Z-axis travel: 406 mm Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Turret: 12 station VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF OFFER Includes (not exhaustive): - CNC lathe Hardinge Quest 6/42 SP - Toolholder set - Chip conveyor - Transformer - Chip tray - Renishaw probe For the exact scope of supply, please refer to the photo documentation. The CNC Lathe Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control system from 2007 is a high-precision machine designed for a wide range of turning operations. It features a robust A2-5 spindle mount, a 42 mm bar capacity, and a 150 mm chuck, allowing flexible machining of different workpiece sizes. With a maximum turning diameter of 309 mm, even larger components can be machined reliably. The axes provide generous travel ranges of 89 mm (X) and 406 mm (Z), as well as high rapid traverse speeds, ensuring maximum productivity. The 12-station VDI 30 turret with an extremely short indexing time of 0.1 seconds guarantees fast tool changes and minimizes downtime. Thanks to the solid construction and the proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for series production with the highest accuracy demands. No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 200 [mm] Lhodpfjuhamcox Aa Eor - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] - Travel : 780 [mm] - Spindle / counter-spindle distance : 980 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 570/1297 [mm] - Y stroke : +/- 100 [mm] - B Axis stroke : 190 (+/-95) [°] - Tool type : Capto C4 - Spindle speeds : 12000 [rpm] - Spindle power : 7,5 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 48 (2x24) LOWER TURRET - Number of positions : 24 - X/Z stroke : 130,5/658 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7,1 [kW] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2700x3460 [mm] - Machine height : 2857 [mm] - Machine weight : 14500 [kg] MACHINE HOURS - Number of working hours : 11000 [h] EQUIPMENT - CNC : Fanuc 31iA-5 - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle - Chips conveyor : Droite - Spindle cooling unit - Predisposition for barfeeder - Electric transformer - Chuck 3 jaws : SCHUNK 215 / SCHUNK 165

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle bore: 65 mm, travel distance X-axis: 180 mm, travel distance Y-axis: 45 mm, rapid traverse X-axis: 30 m/min, controller model: FANUC SERIES 31 i-MODEL A, Equipment: chip conveyor, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation for timely collection between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Travel distances: Lhsdpoxm S Ahofx Aa Eor X1 / X2 axis: 180 mm Y1 axis: 45 mm Z1 axis: 704 mm Z2 axis: 620 mm E2 axis: 720 mm Rapid traverse X/Y/Z axis: 30 m/min Spindle 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW Spindle 2 Max. speed: 7,000 rpm Spindle nose: 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. jaw weight: 1.25 kg Drive power: 16.5 kW Turret Turret 1: 10-position tool turret Turret 2: 12-position tool turret Driven stations: 12 stations Max. speed of driven tools: 8,000 rpm MACHINE DETAILS Control model: FANUC SERIES 31 i-MODEL A Electrical data: Operating voltage: 400 V Frequency: 50-60 Hz Rated current: 80 A Dimensions & weights: Dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Total weight: 9,000 kg Operating hours: 5,381 h EQUIPMENT Documentation/manual KNOLL chip conveyor Tool holders

Condition: used, Year of construction: 2009, operating hours: 3,483 h, functionality: fully functional, total length: 5,550 mm, total width: 2,250 mm, bar diameter (max.): 95 mm, overall weight: 8,400 kg, Max. workable diameter from bar mm 95 Max. workable diameter from recovery mm 500 Max. workable length mm 1250 Max. rotating diameter mm 700 MAIN ELECTROSPINDLE: Variable rotation range rpm 40-2800 ASA spindle nose 8" Spindle hole mm 111 Internal diameter of bearings mm 150 Self-centering diameter mm 315 Motor power kW 30 TAILSTOCK TO FOLLOW: Positioning stroke mm 1,100 Quilt stroke mm 150 Quilt diameter mm 115 MOTORIZED ELECTROSPINDLE HEAD: Type of attachment HSK-63 Max. revolutions RPM 6,000 Electrospindle motor power Kw 9 B AXIS UNIT: Total rotation range 205° Rotation range beyond the tailstock axis 15° Rotation range beyond the spindle axis 10° Angular position with mechanical block Every 5° CROSS SLIDE Max. Z stroke mm 1300 Lodpevv Ud Rjfx Aa Eohr Max. X stroke mm 520 Max. stroke Y mm 210 (+120 – 90) TOOL MAGAZINE Magazine capacity 40 pos Max. diameter of tools with adjacent tools mm 80 Max. diameter of tools without adjacent tools mm 140

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Lhjdpfx Aexqq Hyea Eer

Condition: new, Year of construction: 2025, turning diameter: 350 mm, spindle bore: 65 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 550 mm, overall weight: 5,650 kg, 2-Spindle CNC Lathe with Y-Axis – Model CTXY52-S Machine Description The STS CTXY52-S is a high-precision, high-performance CNC turning center featuring two spindles, a driven turret (BMT55), and a Y-axis (±45 mm travel). Specifically designed for complex turning and milling operations in a single setup, it is ideal for precise, efficient series production. The machine is equipped with the FANUC Oi-TF Plus control system, providing intuitive operation, real-time monitoring, and support for both conversational and G-code programming. Key Features • 2 spindles (main and sub-spindle) for complete machining without the need for reclamping • FANUC Oi-TF Plus CNC control – powerful, proven, and user-friendly • 15-station driven BMT55 turret with high rigidity and rapid tool change • Y-axis ±45 mm – enables milling, drilling, and off-center machining • 30° slant bed design for optimal chip removal and ergonomic handling • One-piece machine bed for superior damping and stability • Coolant system and oil chiller for consistent precision and long service life • Main spindle A2-6, sub-spindle A2-5 – both with high torque capacity • Fast tool changes and compact design Technical Data CTXY52-S Parameter Value Max. turning diameter (in chuck, discs): Ø 740 mm Max. turning diameter: Ø 350 mm X-axis travel: 200 mm (optionally 400 mm) Z-axis travel: 550 mm Y-axis travel: ±45 mm (90 mm total) Main spindle: A2-6 Spindle bore: Ø 65 mm Bar capacity: Ø 52 mm Sub-spindle: A2-5 Lsdpjxl Eqpefx Aa Eshr Sub-spindle bore: Ø 55 mm Rapid traverse X/Z: 25 m/min Machine weight: approx. 5,650 kg Dimensions (L×W×H): 3,030 × 2,045 × 2,050 mm

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Lhsdpfx Aowv Hnmja Esr Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Turning length: 3,000 mm Swing diameter over cross slide: 520 mm X-axis travel: 600 mm Y-axis travel: 150 mm Z-axis travel: 3,150 mm Lhedpfxsxpfd De Aa Eor Swing diameter: 520 mm Turning length: 3,000 mm Control: SIN 840 D Siemens Z-axis: 3,150 mm Z-axis feed rate: 1 – 40,000 mm/min Rapid traverse Z-axis: 40.00 m/min X-axis: 600 mm X-axis feed rate: 1 – 30,000 mm/min Rapid traverse X-axis: 30.00 m/min Main spindle S1 Spindle speed range: 1 – 3,300 rpm Drive power at 100% load: 29.00 kW Spindle nose DIN 55026 – size A11 Spindle diameter at front bearing: 160 mm Spindle bore: 115 mm C-axis: 360 x 0.001° Milling spindle S2 Tool holder: Capto C6 Infinitely variable speed range: 1 – 6,000 rpm Y-axis: -100 / +150 mm B-axis: -110 / +110° Tool magazine with 100 stations Total power requirement: 145 kW Machine weight approx.: 24 t

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit Ledpfsxmirgjx Aa Eohr - Chip conveyor - Documentation - CE marking

Condition: excellent (used), Year of construction: 2015, operating hours: 9,564 h, functionality: fully functional, CNC FANUC 31i-MODEL B5 TOOL PRESETS N. 2 SELF-CENTERING N. 7 HSK TOOLS Lodpfx Ajwayv Eea Eohr

Condition: good (used), Year of construction: 1998, Mazak Integrex 35 turning/milling center, year of manufacture 1998, Mazak T Plus control, turning length 1500 mm, max. turning diameter 575 mm, Y axis, B axis infinitely swiveling, 40-position chain magazine, turning tool holder KM 63, milling tool holder SK 40, tailstock, steady rest, chip conveyor, Kitagawa three-jaw chuck B 12. Lodpfx Ajxm Trdoa Eehr

Condition: good (used), Year of construction: 2011, Müga TT - 42, Year of manufacture 2011, Mitsubishi M 700 control, Bar machining up to 42 mm, Sub-spindle, 2 turrets, B-axis: 0.001°, C-axis: 0.001°, Y-axis: 0.001°, Swivel head B-axis: +50°/-140°, Driven tools, Workpiece catcher, Workpiece conveyor belt, Chip conveyor, 2 collet chucks, Short bar loader Müga DH 65 L/1.5 m, Intelligent manual pulse generator (MPG), Reduction tubes. Main spindle X Y Z-axis 20 stations, 6 driven; Sub-spindle Y-axis 22 stations, 6 driven. Bar capacity: 42 mm Spindle power: 7.5 kW Spindle speed: 4,000 rpm Equipment: - 2 turrets - Driven tools - Workpiece catcher Lodpfx Aexpulksa Ejhr - Workpiece conveyor belt - Chip conveyor - Intelligent MPG Reduction tubes Accessories

Condition: good (used), Year of construction: 2022, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, hobbing software. Lsdpfx Aew Tzfgja Eehr

Condition: good (used), Year of construction: 2006, Gildemeister Twin 42, Year of manufacture 2006, Siemens 840 D control, Turning length up to 210 mm, Spindle bore 56 mm, Main spindle, Counter spindle, 1 x Y axis, 2 x C axis, 2 12-station turrets / all stations driven, Shaft diameter 25 mm, Driven tools up to 6,000 rpm, Lhedpewcyhtsfx Aa Eer FMB Turbo 10-72 loading magazine, Main spindle collet chuck, Counter spindle collet chuck

Condition: good (used), Year of construction: 1999, Gildemeister MF Twin 65, year of manufacture 1999, Siemens 840 D control, travel X/Z 190/555 mm, 1 x Y axis +/- 40 mm, 2 turrets with 12 stations each, driven tools, VDI 30 mounting, C axis, spindle speed up to 6,000 rpm, max. bar capacity up to 65 mm, bar feeder is included but no longer installed on the machine. Lhjdpfow Swcxsx Aa Eor

Condition: good (used), Year of construction: 2019, Niles N 40 MC - 6000 turning-milling center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y-axis -200 / +400 mm, B-axis 0.001°, B-axis swivel range -105° / +95°, tool changer with 192 positions, C-axis main spindle 0.001°, spindle speed up to 1,750 rpm, 2 gearbox stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Lsdpfx Ajw T Ag Esa Eehr