Used Band Filter System for sale (38,518)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Bwedpfeyzxa Eex Al Den Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l Bwedpfxox T Ah Ds Al Den - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, Year of construction: 2022, Volume flow rate: 18,000 m³/h, active filter area 237.6 m², condensate drain, designed for 10 machining centers, mounted on a custom-built steel frame above the hall entrance gate, complete with piping, manufactured to the dimensions of the hall, and intended as a supply line to the individual CNC machining centers. Subject to prior sale. Bwsdey T Nxvjpfx Al Don

Condition: good (used), exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter -Filter system: Manufacturer/type unfortunately unknown Bodpfx Aeg I D Nysl Down flange dimensions DN100 -Individual components: see photos -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Quantity: 1 piece available -Price: per piece Bwodpfxjy R S E Hj Al Dsn -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Bjdpfxovxk Ano Al Down Storage location: Nattheim

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Bjdjr R Ewljpfx Al Down Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Bedpfx Ajyh Hp Rsl Down Cartridge dust extraction system, cartridge filter unit, cartridge filter -Filter system: with vibrator -Type: TMS 8/10 -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm -Dimensions: 1070/680/H2530 mm -Weight: 243 kg

Condition: good (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson, Filter system cartridge filter Bodsy Nnkvepfx Al Dewn -Type: Torit Downflo DF 6 -Motor power: 3 kW -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic -Extraction opening: 3x Ø 320 mm -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Bodpjx Da Tisfx Al Dewn Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: excellent (used), Year of construction: 2018, REF: MM5727 1 x Zumex Food Engineering juice extraction and flitration system with elevator. Manufactured completely in stainless steel. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Serial number - 454293.  ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification: Sizes     Head Unit     Oranges/MIN     KG/H     L/MIN     L/H Bedpjt Uircofx Al Down 9-10-11     Kit 9     150,35     902,4      6,01     360,84 5-6-7-8     Kit 8     133,68     1145,4     7 ,64     458,22 2-3-4     Kit 7     116,94     2338,8     1 5,59     935,53 Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5m L x 1m W x 2.2m H. CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: used, functionality: fully functional, Year of construction: 2008, Used filter system Manufacturer: Dantherm Year of manufacture: 2008 Type: FS 720/5.50/770 Volume flow: 72,000 m³/h Temperature: 120 °C Bwedpfozav Euex Al Don Installed total area: 1047 m² Effective area: 990 m² Total connected power of all drives: 10 kW Exhaust system complete with duct system Chimney 3 x screw conveyors

Year of construction: 2011, condition: good (used), Offer 24370 Sludge filtration system in a sea container + conveyor belt Technical data: - Sludge filter press JUNGHANS with cylinder unit Bedpfjt Srkpox Al Dewn - Flocculation system - Pumps - Separate conveyor belt for sludge removal, length 8.0 m - Control cabinet with electrical equipment - Water collection tray made of aluminum on the entire container floor - Lighting - Sea container with 4 doors - Space requirement for the container: approx. W 6.0 x H 2.4 x D 2.4 m - Weight: approx. 5000 kg - Space requirement for the conveyor belt: approx. W 8.0 x H 0.8 x D 1.0 m - Weight: approx. 1000 kg

Condition: used, Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Bwjdpfxsy Uc Uao Al Den Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Filter fineness: Up to 10 µm Medium/Fluids: Oils and machining emulsions Filter auxiliaries: Optionally with or without filter auxiliaries

Condition: good (used), 210138 Surface Filter UNI STAR X, with factory-installed control and switching unit. Price: on request + VAT (condition as shown in the photo). Motor power: 3.3 kW, 400 V, 50 Hz. Air flow rate: approx. 1,500 - 2,500 m³/h Disposal: 2 x 30 L disposable containers. Subject to prior sale! Bsdpjy It Eiofx Al Down

Condition: good (used), 210137 Surface filter VARIO 2.3, with factory-installed switching and control unit. Price: on request + VAT (condition as shown in the photo). Motor power: 11 kW, 400 V, 50 Hz. Airflow: approx. 5,000 m³/h at 4,800 Pa. Disposal: single hopper support; 200 L lidded drum with pneumatic docking device. Subject to prior sale! Bodpfx Aoy It Drol Dswn

Condition: good (used), 210131 VARIO 2.2 surface filter, with switching and control unit installed at the factory. Price: on request + VAT (condition as shown in the photo). Motor power: 7.5 kW, 400 V, 50 Hz. Airflow: approx. 4,000 m³/h. Disposal: 2 x 30 L disposable containers. Subject to prior sale! Bwjdpforzrimjx Al Don

Condition: good (used), 210140 Surface Filter VARIO 4 – P, with cleaning control, without switchgear and control unit ex works. Price: on request + VAT (condition as illustrated in the photo). Incl. pre-separator. Motor power: 22 kW, 400 V, 50 Hz. Airflow: approx. 10,000 m³/h – 12,000 m³/h. Disposal: 3 x 50 L disposable containers. Subject to prior sale! Bedjy It Azopfx Al Dswn

Condition: used, functionality: unexamined, machine/vehicle number: siehe Beschreibung, Dust extraction system: - 57,000 m³/h - Bag filter type RTFAE550S-JET-SF (without filter bags, the old ones have been disposed of) - Screw conveyor type TRFS400ATEX - Rotary valve type RTZ5050ATEX-S-CR-SEW - Cyclone type RTZA2500-D - Baffle silencer - Compressed air compressors + tank type ALUP Largo 15, 15 kW motor Bwedsy Rzihopfx Al Den

Condition: good (used), Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction blower, fan, extraction, chip blower Bwsdpfxob A Syps Al Don -Drive: 0.37 kW -Connection: Ø 100 mm -Connection: 380 V -Dimensions: 400/600/H1200 mm -Weight: 31 kg

Condition: used, Dimensions (L/W/H) 1400/2000 x1400 x3000 mm Dimensions (L/W/H) 1400/2000 x1400 x3000 mm 2x 220/1x 180 mm with 14 suction nozzlespneum. slide controlfan dischargevacuum system in compact designwith 12 built-in automatic slide valvesused, good conditionmake ALKOtype FU-2-12-800-70-III-Ano. 910225length 1400 / 2000 mmwidth 1400 mmheight 3000 mm12 x air intake D 180 with slide2 x air intake D 220 without slidecladdingshaking downwith discharge via fancompl. controlair return recirculation exhaust air D approx. 500 mmwith fan 2 pieceseach 0,9 3,0 kW - pole-changing motor1450 / 2800 rage location 97447 Gerolzhofendelivery as-is, free-loadedwithout guarantee and warranty Bwjdpfjvwfu Aex Al Dsn

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan Bjdpfx Alsw Nhbmo Djwn -Weight: 320 kg / 890 kg

Condition: new, Year of construction: 2026, functionality: fully functional, filter area: 120 m², volume flow: 15,000 m³/h, total width: 2,000 mm, total length: 2,450 mm, total height: 8,500 mm, Equipment: documentation/manual, AIR FLOW RATE: 15,000 m³/h • DIMENSIONS: approx. 2000 x 2400 x h 7500 mm Bwjdpfoy Sv Diex Al Don • Filter surface area: 120 m² • No. 108 filters type 2850 F.P. • Filter fabric: antistatic, 500 g • No. 108 cage supports with ABS venturi • Filter cleaning system: Pulse-Jet with control unit/sequencer • No. 01 perforated tube Ø 2” for internal fire suppression – 3 bar supply • No. 01 explosion relief panel, horizontal positioning in dedicated structure • No. 01 inspection door in hopper • No. 01 rotary valve • Conical hopper for gravity discharge of filtered dust • Structure support for clearance under rotary valve: 1500/1800 mm • Ladder with protection cage, upper safety handrail • Machine electrical control panel • No. 01 fan, either 18.5 kW or 22 kW Filtration machine for direct discharge into big-bags.

Condition: excellent (used), Year of construction: 2017, Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Condition: The system is unused Bwjdpfx Asytgrxsl Djn -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available -Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: good (used), Camfil Filter Unit CS 610 for Industrial Extraction Systems Bsdpoyrnfwsfx Al Dewn Manufacturer: Camfil KG Model: CS 610 painted Type: Filter unit for industrial extraction systems Article number: 518110 Serial number: 000442739182 Quantity: 2