Used Turn Unit for sale (36,587)

Condition: new, weight max. 1000 kg table turning speeds 180 - 1800 mm/min. roll diameter 200 x 50 mm workpiece diameter 50 - 1500 mm volt 230 V / 50 Hz range L-W-H 950 x 220 x 344 mm Mitlauf range L-W-H 1270 x 310 x 344 mm Antrieb weight 100 kg Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control (3 meters) to set the speed and right / Counterclockwise rotation. - foot switch. - Compact, stable structure; easy to handle. Fpedpfjxabkuox Afnsc Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German

Condition: new, weight max. 3000 kg. table turning speeds 120 - 1200 mm/min. roll diameter 250 x 75 mm workpiece diameter 150 - 2000 mm volt 230 V / 50 Hz weight 154 kg range L-W-H 1210 x 300 x 480 mm Mitläufer range L-W-H 1510 x 500 x 480 mm Antrieb Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. Fpsdpfx Afoxaan Ssnjc - Hand remote control for setting the speed and clockwise - counter clockwise rotation. - foot switch. - Compact, stable structure; easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German

Condition: used, Year of construction: 1999, 3 900 mm centre distance 2x 4mm mm Fpedpox U A Tisfx Afnoc Distance between centres 1x 5 mm mm capacity 600 kp

Condition: new, weight max. 5000 kg workpiece diameter 250 - 2500 mm total power requirement 0,75 kW table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 800 kg range L-W-H 2200 x 2500 x 800 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating Fedpfen N D Iwox Afnspc - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears

Condition: new, weight max. 5,0 t workpiece diameter 250 - 2500 mm total power requirement 0,75 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg weight of the machine ca. 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Fsdpfx Afegvkpfjnepc Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a remote control with digital reading. || Accessories: | - double Foot pedal (start-stop / left-right) | - remote control

Condition: new, weight max. 5,0 t Fpedjgvwgcopfx Afnoc workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Condition: used, weight max. 20 t workpiece diameter 1500 - 3500 mm drum diameter 250 x 100 mm Fpodpfx Afeyfwydjnec feed 100 - 1400 mm/min total power requirement 0,75 kW weight of the machine ca. 2,5 t Dimensions (LxWxH) 2,5 x 1,5 x 1,5 m Roller stand - Self-aligning - Forward/reverse rotation - New control system - Foot pedal - Emergency stop device

Condition: new, weight max. 1200 kg table turning speeds 80 - 1600 mm/min. roll diameter 200 x 50 mm workpiece diameter 20 - 800 mm range L-W-H 520 x 470 x 390 mm Antrieb range L-W-H dito mm Mitläufer voltage 230 V / 50 Hz weight 56.0 kg Description: Fpedpfjxabh Hox Afnec - Device for rotating and positioning Containers and cylindrical workpieces. - Unit in solid steel construction with polyurethane-coated metal rollers. - Precise speed adjustment by Frequency converter. - Foot switch for start / stop, 4-step operation. - Switch for right / left rotation. - Rotary knob for infinitely adjustable rotation speed. - Selector switch for rapid traverse / normal operation. - Switch with indicator light for operational readiness. - HF protected Scope of delivery: - 1 drive unit with control (integrated) - 1 follower

Condition: new, weight max. 5000 kg table turning speeds 6.0 - 60.0 m/h Fpsdpjxab Awefx Afnoc roll diameter 250 mm Wheel width 120 mm workpiece diameter 250 - 2800 mm total power requirement 0.75 kW weight ca. 300 kg range L-W-H ca. 4165 x 1360 x 1200 mm Stable turning The HGK_Series has two synchronously working drive units that are used for ensure continuous rotation with stepless speed control. Of the Roller spacing can be increased and decreased manually using locking pins to achieve a large diameter range of the workpieces. Characteristics: - For rotating and positioning - in the field of machine, container, plant and pipeline construction - Two synchronously running drive motors - Adjustable rotation speed. - PU castors - Adjustment is via bolts - Remote control Scope of delivery: - 1x controller - 1x driven unit - 1x traveling unit

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 2,500 kg, workpiece diameter (max.): 3,200 mm, load capacity: 2,500 kg, High-quality premium turning device set in scissor design for cylindrical workpieces such as pipes, shafts, tanks, and other rotationally symmetric components (for example, sheet metal jackets). Maximum load capacity of the turning device—powered and idler units—is 2,500 kg (optionally available with a 3,000 kg load capacity). Manual adjustment of roller width—secured by locking pins; rotatable workpiece diameter from Ø 80 mm to Ø 3,200 mm. Infinitely variable rotation speed from 100 mm/min to 1,300 mm/min, adjustable via a potentiometer on the control panel. (Base rotation speed is programmable for optimum adaptation to welding requirements.) Roller size Ø 160 mm x width 50 mm—rollers with PU coating or optionally bare steel. Drive power: 0.18 kW. Weight of tank/tube rotator set: 300 kg. Fpedpfx Aeyf U Dyefnjc Features: - Double foot pedal for forward and reverse operation with hand-held controller.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 10400 € 199.68 € 20000 kg 10000 to 750 mm 4500 mm 300 mm Fjdpfox Urrnox Afnopc 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 8700 € 167.91 € 10000 kg 5000 to 750 mm 4500 mm 300 mm Fpsdpfx Ajx Urrbsfnec 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 16000 € 307.2 € 20000 kg 10000 to Fsdpfxsx Urq Ro Afnopc 900 mm 4500 mm 300 mm 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 13200 € 253.44 € 10000 kg 5000 to 900 mm 4500 mm 300 mm 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, Fpedsx Urp Tjpfx Afnoc drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request.

Condition: new, Year of construction: 2025, neu 2025 020176 prompt, Zwischenverkauf v Türkei 3700 € 1 Fjdpfx Afex Urptsnspc 4 kg 155 kg 2 to 100 mm 900 mm 300 mm 70 mm With 0.55 kW motor drive Forward and reverse operation Foot pedal

Condition: used, Year of construction: 2002, weight max. 10 / 20 (einzeln / Satz) t workpiece diameter Ø250 - Ø4600 mm gear diameter 380 mm turning speed drive gear steples 130 - 1300 mm/min total power requirement 2x 0,75 kW Fpsdpfxowg Hprj Afnec weight of the machine ca. 750 kg / 500 kg Steel rollers, dia. 380 mm Idle rollers with motor driven displacement of rollers Continously variable speed of drive rolls

Condition: good (used), Year of construction: 2008, 8 units Muratec turning centers. MURATEC MW 120, year 2003 MURATEC MW 200, year 2003 Fpodpfx Afoxwb Smsnjc MURATEC MW 120, year 2004 MURATEC MW 120, year 2004 MURATEC MW 120, year 2007 MURATEC MW 120, year 2007 MURATEC MW 120, year 2008 MURATEC MW 120, year 2008

Condition: new, weight max. 1000 Kg Fedpfxeupxkke Afnepc workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 80 - 1600 mm/min total power requirement 0,23 kW dimensions of the machine ca. 2 Stk. 0,45x,039x0,33 m

Condition: new, weight max. 1000 kg workpiece diameter 20-800 mm connected load frequency 230 V speed 100 - 1000 mm/min Fodpfjfv A Afsx Afnjpc total power requirement 0,1 kW weight of the machine ca. 65 kg dimensions of the machine ca. 520x470x390 mm

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 50 - 2000 mm/min weight 65 kg total power requirement 0,6 kW Fjdpfx Afek Dvhdjnepc dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English

Condition: new, weight max. 3000 kg Fpjdpfx Afofv A Aionsc workpiece diameter 20 - 1500 mm drum diameter 100 x 200 mm connected load frequency 230 V total power requirement 0,12 kW dimensions 0,8 x 0,37 x 0,36 m speed 100 - 1000 mm/min

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 50 - 2000 mm/min weight 65 kg total power requirement 0,6 kW Fpedpfx Afevn U E Ssnec dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English

Condition: excellent (used), Year of construction: 2002, weight max. 15/30 t Fpedpfjwc D Ausx Afnsc workpiece diameter 600 - mm gear diameter 520 mm total power requirement 2 x 1,1 kW weight of the machine ca. 2300 kg

Condition: used, Year of construction: 1999, weight max. 15 / 30 (einzeln/Set) t Fjdpswf Rhijfx Afnepc workpiece diameter 600 - 6000 mm gear diameter 520 mm Rotating speeds 130-1300 mm/min voltage 400 V total power requirement 2 x 1,1 kW weight of the machine ca. 1200 kg + 800 kg kg Serial No. 2953 Drive and idle unit equipped with rail rollers (can be dismantled if not required) Units are not from same original set and differ in height. Height floor - center of turning rolls 670/750 mm (Idle unit / drive unit)

Condition: new, weight max. 5 t workpiece diameter 300 - 2500 mm drum diameter 250 x 100 mm feed 100 - 1000 mm/min total power requirement 0,75 kW weight 0,6 t dimensions 1,5 x 1,0 x 0,6 m characteristics • Self-aligning for multiple diameters • Infinitely variable speed of the drive unit • Polyurethane coating of the rollers • Optimum load distribution (4 rolls/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces • High stability due to the solid construction of the machine • CE certificate • Very good value for money Fodpfx Afspam Hnenopc • Remote control on the cable • Documentation in English