Used Test Daylight Press for sale (21,360)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 16,381 h, Used AMADA press brake Bedpfx Ageykyuzjzewi Model: HFT 130-4 Capacity: 4000 x 130T Number of axes: 4 Y1 Y2 X and R AMADA automatic table crowning CNC: CD2000 Axes retrofitted with new drive units New safety light curtains along entire length Fast working speed (laser): 100 mm/sec Clearance between uprights: 3,760 mm Total length: 5,480 mm Depth: 3,000 mm Height: 2,900 mm Weight: 11.5 tonnes Machine videos available on request.

Condition: excellent (used), Binder Model: MKF 720 E3.1 Temperature and Climate Test Chamber Air-cooled Temperature range: -40°C to +180°C Humidity range: 10% r.h. to 98% r.h. The MKF climate test chamber is a specially developed environmental simulation chamber for industrial material testing and environmental simulation. It offers unmatched performance, significantly exceeding the capabilities of conventional heating chambers. It is suitable for all applications required in material testing, aging, and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm, Height: 2005 mm, Depth: 1230 mm Internal dimensions: Width: 1200 mm, Height: 1020 mm, Depth: 600 mm Interior volume: 734 liters Net weight (empty): 590 kg Max. total load: 160 kg Max. load per shelf: 40 kg Bjdpfx Ajymcqdegzjwi Performance Data, Temperature: Temperature range: -40°C to +180°C Temporal temperature deviation: 0.1...0.5 ± K Spatial temperature deviation: 0.1...1.8 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.8 K/min Max. heat compensation: 6500 W Performance Data, Climate: Temperature range: 10...95°C Humidity range: 10...98% r.h. Temporal temperature deviation depending on setpoint: 0.2...1.5 ± K Max. heat compensation: 1000 W Electrical Data: Nominal voltage: 400V 3N~ ±10% 50Hz Nominal power: 11 kW, 19.2 A Refrigerant: R404A, 5 kg Important notice: 'The table shown in the photos is not included in the sale.' Buyer safety information: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with regulation-compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and error!) Further questions? Feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm × 65 cm Bwsdpfeypb Igex Agzji Condition: Very good! Functionality checked. FLITS Rental & Sales Service: With every machine, we supply a bundle of tying wire (120 wires). Need additional bundles of tying wire? Feel free to request a non-binding quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you have the right machine quickly. You are more than welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take the time to inform you properly and show you the right machines. We are happy to assist you further! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Condition: good (used), Year of construction: 2016, operating hours: 47,624 h, Just arrived, more pictures and a video to follow Bwedpfx Asx Uzy Ujgzji Baler Avermann, Type AVOS 1410 BR5 – 45/80, pressing force 80 t, year of manufacture 2016 Technical data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine weight: approx. 18,000 kg Note: The baler was dismantled from running operation. A suitable WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Further pictures available on request. Please feel free to contact us. Please note: All technical specifications are based on manufacturer’s information. We accept no liability for the accuracy of these details or for errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment only, without warranty or guarantee.

Condition: used, Year of construction: 1986, total height: 2,900 mm, total width: 1,450 mm, total length: 1,500 mm, Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No Bwodpfxsylb Edo Agzei - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, pressure 63 t throat ca. 280 mm stroke 8-100 mm no. of strokes 60-130 Hub/min ram - range of adjustment 80 mm weight of the machine ca. 4,3 t Bwodpfx Agexu Nw Sezsi Pressensicherheitssteuerung Pilz fehlerhaft!

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, pressing force: 200 t, working range: 4,100 mm, Equipment: CE marking, emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, Used Edwards Pearson Pr10 8 axis CNC pressbrake Bystronic EDWARDS PEARSON PR 10 ELITE MODEL CNC PRESS BRAKE Specifications: · 8 axis machine · 6 axis back gauge Bwjdpfxewcf Eqo Agzji · Year 1999 · 200 Ton Bending Force · 4,100mm Bending Length · Cybelec CNC Control Complete with a large amount of upper and lower tooling

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Just arrived, more pictures and a video will follow Bale Press Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Total connected load: 128 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h Bjdeym Sqyepfx Agzjwi 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data is based on manufacturer information. We assume no liability for the stated information or possible errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspection by appointment possible. Sale takes place ex works, advance payment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2002, functionality: fully functional, ROLAND 906-6 LVV - Year 2002 6 colors + conventional varnish + UV varnish Bedpfjyn Immjx Agzswi Total impression count approx. 340 million Sheet-fed offset press - Printing units: 6 + 1 conventional varnish unit / UV varnish (dryer 3+3) Including hybrid rollers High-pile and extended delivery Technical features: Speed: 13,000 sheets/hour Max. paper size: 1020 x 1420 mm Min. paper size: 600 x 850 mm Thickness: 0.2–1 mm RCI - ink control system APL Dampening solution refrigeration unit IR hot air dryer Inking unit temperature control device Varnish preparation system OXY-Drey de-dusting system Eltosch drying (IR hot air drying system in the extended delivery - hybrid) 3x conventional IR dryers 3x UV dryers in extended delivery Non-stop operation Temperature control Varnishing unit: Interdeck doctor blade system

Condition: excellent (used), Year of construction: 1994, Hydraulic press brake Fab. TRUMPF Typ. TrumaBend V50 Year 1994 Technical data: Trumpf Make: Trumpf Type: TrumaBend V50 Year of construction: 1994 Capacity: 50 t Bedpfxor D Sdge Agzswi Effective length: 1270 mm Stroke: 215 mm Operating pressure: 290 bar Voltage: 3 x 400V Rated current: 12.5 A Connected load: 8.0 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4750 kg Equipment: Control unit - Control system: Delem DA-28 - Pneumatic die displacement - Hydraulic tool clamping top and bottom - Controlled axes: Y1, Y2, X, R - 3 manual stop fingers, pneumatically clampable - Tools: Punch set segmented, straight, 1050 mm, new Die V16, 30° 1000mm Die V08, 30° 1000mm Die V10, 30° 1000mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 1992, Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: - Control Delem DA 58 Bsdpfx Aoh U A Ibjgzewi - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of manufacture 2000 Technical specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: fully automatic, 4-fold Throughput rate at: 35 kg/m³: approx. 9.5 t/h 60 kg/m³: approx. 16.5 t/h 100 kg/m³: approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: paper, cardboard, film Bodpfox Tflfsx Agzewi The baler is in good condition and has been checked and tested. A demonstration video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: excellent (used), CTS Type: CW-60/7 Walk-in Climate Test Chamber CTS Walk-in climate chamber 7 m³ Temperature & humidity testing from -60 to 120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. This is a professional walk-in climatic and temperature test chamber designed for industrial, research, and quality assurance applications. The system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from -60°C to +120°C - Climatic testing with 10–95% relative humidity - Programmable temperature and humidity cycles - Endurance stress testing - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Particularly suitable for: - Electronics testing - Solar modules (former application) - Automotive components - Materials testing - Endurance tests Airflow management ensures very uniform temperature distribution throughout the entire 7 m³ test chamber. Technical data: Temperature: -60°C to +120°C Change rate approx. 2 K/min Humidity: 10–95% r.H. Dew point range: +5°C to +89°C Refrigerants: R404A/R23 Max. allowable pressure: 25 bar III.6 Quick Start Instructions Volume: Test volume: 7 m³ Walk-in design (walk-in) Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power / Connection: 400 V, 3/N, 50 Hz Rated power: 43.1 kW Rated current: 67.5 A Protection class: IP54 Weight: 4,000 kg Condition: used Delivery scope: (see pictures) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone. Bwsdpfoylxaxjx Agzsi

Condition: used, Year of construction: 1989, Make and model: Bruderer BSTA 25 EL Year of manufacture: 1989 Nominal capacity: 250 kN, 25 tons Max. number of strokes: 100/1350 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm Bedpfx Agoyrf Aaezswi Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: used, Year of construction: 2006, Manufacturer: La Mécanique Moderne / OlexaModel: FILHA 12PYear: 2006Type: Filter pressNumber of plates: 12Unit plate surface area: 40 x 40 cm Bwsdpfxsykcaae Agzei

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Bwodpfxjylmame Agzei Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2000, Used Almex Expander Bedpfsynt Uvox Agzowi - Incl. 160 kW drive motor Can be inspected in operation

Condition: used, pressure 150 t Bjdpjyqv Ahofx Agzjwi Table dimensions 1000 x 630 mm voltage 400 V Inclineable mechanical press with updated electrics (CE2004) and bolster plates. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1988, pressure 200 t table length 2500 mm table width 1800 mm table travel 2700 mm dayligth 2250 mm upper clamping surface: 1800x2500 column base area 1900 mm Bedeyqvxiepfx Agzjwi total power requirement 22 KW weight of the machine ca. 30 t dimensions of the machine ca. . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1981, pressure 100 t table length 1250 mm table width 900 mm table travel 1200 mm dayligth 700 mm upper clamping surface: 1000x1200 weight of the machine ca. 12 t dimensions of the machine ca. . m Bjdjyqvtmepfx Agzswi Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2012, functionality: fully functional, Infeed Baling press Presto HPK 50 HS, year of manufacture 2012, with perforator and incline conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year: 2012 Drive: 30 kW Press force: 50 t Feed opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Max. fill volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Materials: paper, cardboard, film, PET bottles Please note: Bwedpfeyma Rzsx Agzsi All technical data is based on the manufacturer's information. We assume no liability for the stated specifications or any possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, controller manufacturer: Cybelec, controller model: VisiTouch 19, bending force (max.): 200 t, working width: 3,100 mm, stroke length: 260 mm, throat depth: 410 mm, distance between stands: 2,550 mm, Baykal APHS PRO 31200 CNC Press Brake The Baykal APHS PRO 31200 is a CNC-controlled press brake constructed with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser safety system (AKAS / LCII), as well as a CNC-controlled crowning system, and is operated via a Cybelec Visitouch 19MX 3D control unit. Technical Specifications: Pressing force: 200 t Bending length: 3100 mm Bending length between frames: 2550 mm Throat depth: 410 mm Bjdpsyrgcnefx Agzewi Table height: 880 mm Max. ram stroke: 260 mm Motor power: 18.5 kW Oil tank capacity: 210 l The 5-axis backgauge (X + R + Z1 + Z2 + X5) enables precise positioning. The positioning accuracy is ±0.03 mm, and the travel speed along the X-axis is 330 mm/s. Control System: The Cybelec Visitouch 19MX offers intuitive operation via a 19" touchscreen with 3D visualization and simulation. Parts can be imported as DXF flat patterns or 3D files. Features such as automatic bending sequencing, backgauge positioning, and tool setup assist with programming complex parts. Equipment: - Fiessler AKAS / LCII laser safety system - Automatic motorized table crowning (WILA system) - Manual quick-release clamping, Promecam / AMADA style - 2 front sheet supports, laterally adjustable - Centralized lubrication - Hour meter - CE compliance Machine Data: Year of manufacture: 10/2025 Serial number: 31880 Weight: 11,500 kg Dimensions (L×W×H): 3820 × 1800 × 2700 mm The machine is in stock and available for immediate delivery. The warranty is 12 months for single-shift operation.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, controller manufacturer: Cybelec, controller model: VisiTouch 19, bending force (max.): 160 t, working width: 3,100 mm, stroke length: 260 mm, throat depth: 410 mm, distance between stands: 2,550 mm, Baykal APHS PRO 31160 CNC Press Brake The Baykal APHS PRO 31160 is a CNC-controlled press brake with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser protection (AKAS / LCII), and a CNC-controlled crowning table. Operation is via a Cybelec 2D CNC control unit. Technical specifications: Press force: 160 t Bending length: 3,100 mm Bending length between uprights: 2,550 mm Throat depth: 410 mm Table height: 870 mm Max. ram stroke: 260 mm Motor power: 15 kW Oil tank capacity: 180 l The 2-axis backgauge (X-R) is driven by AC servo motors and provides a positioning accuracy of ±0.03 mm. Travel range: X = 1,000 mm; R = 160 mm; travel speed: 330 mm/s. Two laterally adjustable stop fingers are included. Equipment: - Cybelec 2D CNC control - Fiessler AKAS / LCII laser safety - Automatic motorized crowning table (WILA system) - Segmented upper tooling, Amada system - Manual quick-release clamping system Promecam / AMADA - 2 front sheet supports, laterally adjustable - Central lubrication Bjdpjyrf Upjfx Agzswi - Operating hours counter - CE compliance Machine details: Year of manufacture: 10/2025 Serial number: 31865 Dimensions (L×W×H): 3,820 × 1,800 × 2,700 mm The machine is in stock and available for immediate delivery. Warranty: 12 months for single-shift operation.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cybelec, controller model: VisiTouch 19 MX, bending force (max.): 100 t, working width: 3,150 mm, stroke length: 320 mm, distance between stands: 2,700 mm, travel distance X-axis: 800 mm, number of support arms: 4, For sale is a Mecos Synchro 100/3000 press brake with a working length of 3000 mm. The machine has been hydraulically and mechanically inspected and is ready for operation. The machine features axes X1, X2, Y1, Y2, R as well as Z1 and Z2. The entire electrical system has been renewed, including control, servo motors, controllers, and safety PLC. We offer a 1-year warranty on all electrical components. Equipped with a Cybelec control unit supporting both graphical and numerical programming. DXF files can be directly imported into the control system. Inspection possible by appointment. Bwsdpfx Agsyrf Sbezsi

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Press force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bodoyngw Djpfx Agzjwi Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening size: 119.5 cm × 65 cm Condition: Very good! Inspected and fully functional. FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires). Need more bundles of tying wire? Request a non-binding quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are warmly welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us ample time to inform you properly and show you the most suitable machines. We are happy to assist you! Waste baler | Paper baler | Cardboard baler | Plastic baler | Waste compactor | Recycling | Textile baler | Waste processing