Used Test Daylight Press for sale (35,191)

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Hedjvuuh Tspfx Ag Usng Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: good (used), Year of construction: 1988, Reaction vessel, batch system, solids separator, washing trough, painter's wash station, water treatment, tool and water cleaning, filter press, chamber filter press -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 plates Hnedpfx Agohvfzns Ueg -Hydraulic cylinder: Stroke: 115 mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg

Condition: excellent (used), Veneer Press OTT JU 2513 - used - new press plates, emergency stop rope, push-button control, anodized plates ----- Technical data ----- Press area: 2,550x1,350 mm, Power per heating plate: 9,100 W, max. opening height: 400 mm, number of cylinders: 4 units Quality info: - Hydraulics checked - Plates replaced - Plates checked for flatness - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use Hodpfx Agsx R Sydj Usng

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 8923, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 650 mm, total width: 3,100 mm, total length: 2,000 mm, pressing force: 320 t, stroke length: 20 mm, stroke adjustment: 160 mm, clearance between the columns: 1,530 mm, overall weight: 38,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 320 t, The machine is completely overhauled and finished. The control system is built according to customer requirements (Siemens control). Delivery time is approximately 3–4 months after the new control system is designed based on the customer's specifications. Hjdsx U Tudepfx Ag Ueng

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm Hnjdpfxsx Uru Ne Ag Usg table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: used, functionality: fully functional, Year of construction: 1987, control type: CNC control, Technical condition: Used Bending length: 3100 mm Tonnage: 135T Press brake type: CNC Back gauge: X-axis, R-axis height adjustable (manual) Crowning: no Daylight opening: 325 mm Throat depth: 250 mm Control: ATS 460 Motor power: 15.0 KW Tool clamping: HACO Year of construction: 1987 Total length: 3500 mm Total height: 2100 mm Total depth: 1800 mm Weight: 6500 kg Delivery and installation at your location is of course possible, delivery and additional costs upon consultation. Hedox Tgykspfx Ag Ujng Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to the sale of sheet metal working machines, we offer a complete package for service, maintenance, and repairs.

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Hnjdpfevuuhgsx Ag Usg Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, rotary mandrel press, rack and pinion press, workshop press Hodpfxoxni Hyj Ag Ueng -Ardent press. Rack and pinion press, heavy-duty design -Protrusion: 210 mm -Height: min. 35 mm / max. 350 mm -Dimensions: 435/230/H550 mm -Weight: 51 kg

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Hnjdpfx Asu Iukfsg Usg Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 2004, machine/vehicle number: P020504, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA-66W, bending force (max.): 130 t, working width: 3,150 mm, stroke length: 350 mm, throat depth: 500 mm, distance between stands: 2,600 mm, installation height: 550 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, number of axes: 6, table height: 950 mm, type of crowning: CNC-controlled, oil tank capacity: 160 l, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 160 mm, overall weight: 13,500 kg, total length: 2,300 mm, total width: 4,000 mm, total height: 3,100 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, safety light barrier, upper tooling, Offered machine: Used CNC hydraulic press brake Manufacturer: CR Electronic Model: GOLD 130/31 Year of manufacture: 2004 Control: Delem DA-66W (8-axis capable) Condition: used, fully functional (Z axes currently not operational, see details below) Hnjdpfx Agsw A Rggs Usg Technical Specifications: - Pressing force: 1,300 kN (130 t) - Bending length: 3,100 mm - Distance between uprights: 2,600 mm - CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically non-operational – new servo drives required. Manual adjustment possible.) - Stroke: 350 mm - Install height: 550 mm - Throat depth: 500 mm - Backgauge (X): 600 mm - Table height: 950 mm - Working speed: 10 mm/s - Return speed: 115 mm/s - Motor power: 11 kW - Operating pressure: 275 bar - Weight: approx. 13,500 kg Equipment & Features: - CNC-controlled hydraulic crowning - Quick-change system tool holders top & bottom - Manual quick-clamping of top tools - Laser optical finger guard (safety light curtain) - PLC-based diagnostic system - 2 support arms with quick adjustment - Operating manuals available - CE compliant Included accessories: - Fully equipped tool cabinet - Top tool 88°, full bending length - Top tool 35°, full bending length - Top radius bending tool - V8 T-die, full bending length - V12 T-die, full bending length - Flattening die, approx. 2,000 mm length Condition / Remarks: - The machine is well-maintained, currently connected - Inspection and trial run under power possible onsite - Z1/Z2 currently not functional – new servo controllers required - The machine is being sold due to a planned modernization and replacement by a new press brake.

Condition: used, Year of construction: 1991, Press Brake Manufacturer: AMADA PROMECAM Model: HFB 125/40 Hodpfxsx Tzl Is Ag Ueng Year of manufacture: 1991 Control: DELEM DA 58 Max. pressing force: 1,250 kg Max. stroke: 180 mm Sheet thickness: 8 mm Working width / throat: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Rated current: 24 Weight: 9,900 kg Availability: immediately

Condition: good (used), Year of construction: 1978, Pressing force 45 t Hodpfxox Rvbxs Ag Ueng

Condition: used, Year of construction: 1983, nominal force 2500 t Hnedpfx Agowmf Tvs Usg stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Manufacturer: Cordia, column drilling machine type S 26 -Motor: 1000W -Speeds: 95 - 1450 rpm, 6 levels -Table size: 320 x 270 mm, travel 500 mm -Spindle mount: MK3 -Spindle stroke: 100 mm -Projection: 280 mm -Columns Ø: 120 mm -Accessories: including lighting and additional. attached vice, see photos -Dimensions: 700/760/H1950 mm Hnodpfx Aelx Nvnsg Usg -Weight: 325 kg

Condition: ready for operation (used), Year of construction: 2003, This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information. Application Types Hnedpfsx Tkazjx Ag Ujg Pressing / Laminating

Condition: new, 0 2750 mm Hnjdpoxmk D Rofx Ag Usg Working height 2500 mm

Year of construction: 2022, condition: like new (used), functionality: fully functional, For sale: Emmegi Five 300CS glazing and inspection press, ideal for precise glazing and final inspection of window and frame elements. The machine features a self-centering clamping system and robust, scratch-resistant contact surfaces. Reliable technology, user-friendly operation, and compact design. Technical specifications: - Contact surfaces coated with hard, scratch-resistant PVC - Adjustable working surface height: 875–925 mm Hodpfx Aox U Daqjg Uong - Working surface tilt: 0° (horizontal) to 85° - Adjustable clamping force (max.): 660 N - Clamping device opening: 425–2,425 mm - Clamping jaw height (max.): 65 mm - Clamping device with 2 beams, each with 5 adjustable jaws - Beam height: H = 2,060 mm - Self-centering clamping system with retractable clamping beams - Pneumatic tilting of the roller conveyor in horizontal position - Infeed/outfeed roller conveyor, floor height adjustable: 305–355 mm - Machine length: 3,000 mm - Air consumption: 150 Nl/cycle - Maximum load capacity: 200 kg - Machine weight: 330 kg

Condition: good (used), Year of construction: 1978, Press capacity: 63 t Hnodpfox Rvbfjx Ag Ujg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system Hedpfxjw U Ekpe Ag Ueng

Condition: good (used), Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm Hnjdpfjt E D Dnex Ag Ujg -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t Hjdpfx Agjvuukuo Ueng stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: good (used), Hydraulic press, two-column press, oil hydraulic press Hnodpjb I Dqaefx Ag Uog -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Year of construction: 2013, condition: good (used), Hydraulic press, oil hydraulic press, shear press -Manufacturer: Santenberg, hydraulic shear press -Hydraulic unit: HyPneu 0.75 kW / 100 bar Hsdpfx Agjix Aylj Uong -Individual components: see photos -Dimensions: 1190/910/H1670 mm -Weight: 262 kg

Condition: good (used), Year of construction: 2010, Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Working hours: hrs. -Switching hours: hrs. -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg Hnodpfexxz E Nsx Ag Ujg

Condition: good (used), Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm Hjdpfx Ageb A H Dhj Uong -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg