Used Eccentric for sale (895)

Condition: used, Year of construction: 1981, total height: 2,300 mm, total width: 1,100 mm, total length: 2,000 mm, Empty weight: 500 kg Price: On request - Year: 1981 - Documentation available: No - Table width: 505mm - Throat depth: 250mm - Table length: 710mm - Ram width: 280mm - Ram length: 450mm - Power: 63.0ton - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hjdpfx Aexhcgysacenu Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1966, condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets pressure 1500 kN (150 tons) stroke 60 mm ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm Hedpfx Aajir I Slocsnu dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Tech. Data and dimensions: Errors excepted.

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SERVICES - EBU H 12 FT Eccentric press - Siegfried SPC control unit Hnjdpfx Aofrzlmjacou 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . Hjdpfxexpdd Ao Aacjnu new UVV-tested .

Condition: used, Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40 Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003 Pressing force: 40 tons Throat depth: 225 mm Table opening: Ø 200 mm with support rim Ø 225 mm Table dimensions: 560 x 470 mm Ram area: 260 x 200 mm Adjustable ram stroke: 8–88 mm Ram adjustment: 63 mm Max. install height: 500 mm Clamping shank bore: Ø 40 mm Strokes per minute: 40–120 Motor power: 4 kW Power supply: 400 Volt, 50 Hz Table height above floor: 700–950 mm - Table height adjustment with 2 support spindles Hnjdpsxlkq Iefx Aacou - Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection - Stroke release via electric footswitch or two-hand control console - Front crankshaft support bearing - Overload protection via shear plate - Manual central lubrication - Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine - Safety standard (UVV) for manual loading/unloading The machine is equipped with the following operating modes: - Setup - Single stroke (two-hand) - Single stroke (foot) - Continuous run (foot) - Automatic continuous run - External engagement Required space (L x W x H): 1900 x 950 x 2600 mm Weight: 3.1 tons Very good condition

Condition: excellent (used), Eccentric chuck with key (28133) in sturdy wooden transport box make Klopfer type EZ 32 diameter 160 mm total diameter 265 mm height 180 mm KK receptacle size 5 cone diameter 82,575 mm bolt circle diameter 104,8 mm eccentric adjustment range 0 - 32 mm Mounting flange can be exchanged if required Hnodpfsgzlmwsx Aaceu

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Hodjw Tukijpfx Aacsnu Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 108528, The last DGUV inspection was in 2023. Hodexpfv Hspfx Aaconu

Condition: good (used), – Capacity 25 tons – Table 525 x 405 mm – Stroke 75 mm – 120 strokes/min. – Foot control or two-hand operation – Central lubrication system – 380V Hnjdpfxsxk Tm No Aacsu

Condition: good (used), functionality: fully functional, insert safety device - Strokes per minute: 105 SPM and 140 SPM Throat depth: 450 mm Hnsdpfxoxpddve Aacju Table: 700 x 780 mm Capacity: 63 t Ram stroke: 8–100 mm Ram adjustment: 70 mm Ram, width x depth = 450 x 280 mm Installation height: 310 mm

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Hnodpfsxf Utajx Aaceu Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: excellent (used), Eccentric chuck with key (28134) in a sturdy wooden transport box Brand Klopfer Type EZ 32 Diameter 160 mm Diameter 265 mm Height 180 mm KK holder size 5 Cone diameter 82.575 mm Bolt circle diameter 104.8 mm Eccentric adjustment range 0 - 32 mm with one set of drilling jaws with one set of turning jaws 41.5 kg weight with case 55 kg Hodpfx Aaegzlmzeconu Hole flange can be replaced if necessary

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Hnedpfxjuqdwxe Aacsu Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: used, Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 831170, The machine is only operational with two-hand control; the foot switch is missing. Hnedpfoxpftrsx Aaceu

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Hodpfxjxlh Rfe Aacsnu Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: used, Year of construction: 1965, pressure 250 t throat 450 mm stroke 20 - 140 mm table-size 1210 x 850 mm no. of strokes 35 Hub/min ram adjustment 80 mm ram surface 750 x 320 mm table pass 400 x 250 mm total power requirement 200 HP weight of the machine ca. 16,8 t dimensions of the machine ca. 2,8 x 1,7 x 3,0 m Hjdpew In Dfofx Aaconu

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-preserved Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical diameter 150 mm, supplied with chuck key and a set of hardened stepped jaws, as well as the assembly and operating manual for the Horvath eccentric clamping chuck in what is presumably the original wooden case (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces in a lathe. Price / details on request. All technical details are subject to error or typographical mistakes. Sales exclusively to countries within the European Community. Hjdpfx Ajg Umb Eeacjnu

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm Hnedpfx Aaexh Sx Esceu stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm tool hole in ram Ø35 mm weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Hjdpfouqcxnox Aaconu Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Condition: used, Year of construction: 1962, functionality: fully functional, machine/vehicle number: 4378, ram adjustment: 60 mm, punching force: 10 t, We are selling an eccentric press 10TF, without DGUV inspection Hnodpfxjxnwi As Aacsu

Condition: used, Year of construction: 1989, pressure 150 t throat 310 mm stroke 30-120 mm no. of strokes 20-60 Hub/min ram - range of adjustment 90 mm table surface area 820x600 mm ram surface 550x430 mm hole in the table 330x200 mm table height 750 mm tool hole in ram Ø50 mm weight of the machine ca. 9,5 t dimensions of the machine ca. BxTxH 2500x2500x3000 mm Hjdpfx Aexh Sw Ueacsnu

Condition: used, Year of construction: 1979, machine/vehicle number: 4941, Capacity: 75 ton Throat depth: 300 mm Hedsw Tukvepfx Aacjnu Ram stroke: 8 - 100 mm Slide adjustment: 60 mm Shut height (stroke down, adjustment up): 390 mm Table surface area : 700 x 600 mm Slide area: 400 x 270 mm Number of strokes: 120 s.p.m. Required power: 4 kW Dimensions L x W x H: mm Weight of machine approx.: 3,5 ton Extended machine accessories Dreher roller feed model WAV-MD-2Z /1060 K-AMaterial width 210 mmMaterial thickness max. 1.5 mmMax. feeding speed 80 m/min.

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm Hnsdpjxh Swhefx Aacou ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: used, Year of construction: 1970, Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Hsdpfx Aaouqc Enecsnu Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton Standard configuration the electric is new from 2015.

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Hnodpfxouqc Hfe Aaceu Extended machine accessories Press body can be tilt