Used Test Daylight Press for sale (22,032)

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Itedpozd Sdmjfx Akpsn Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Heraeus Type: HT 7012 S2 Temperature shock test chamber, water-cooled Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Itsdpfxozd R Uwo Akpon Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, CTS Type: CS-70/350 Water-cooled Test chamber volume: 350 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C / +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH Iodpfxjziyw Ee Akpjtn Max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R 452A and R 23 Isdpezd R Tgefx Akpstn Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Warm Chamber: The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Refrigerant: R404A / R23. Weight: 1000 kg. Itodpfezd R Azjx Akpen For your safety as a buyer, please note the following information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS   Itjdpfx Akeziyw Sepon Type: T-40/600 /011232   CTS Temperature Testing Chamber, Water-Cooled   Including metal supports to increase the floor load capacity   Test chamber volume: 600 liters   Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm   External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm   Temperature operating range:   Temperature range -40 to +180°C   Temperature deviation ±0.1 to ±0.3 K over time   Heating rate: 2.5 K/min Cooling rate: 3 K/min   Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A   Weight: 550 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 7.5 K/min Temperature change rate (heating): 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Isdpszdtdhjfx Akpetn Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10.5 kW, Rated current: 22 A Fuse (customer-side): 32 A, time-delay Sound level at 1m distance (free-field measurement): < 69dB (A) Side access: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R 404A and R 23 Weight: approx. 460 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 1997, operating hours: 29,000 h, input voltage: 400 V, input current: 35 A, pressing force: 220 t, total length: 3,650 mm, total width: 2,100 mm, total height: 2,950 mm, overall weight: 13,500 kg, Equipment: documentation/manual, Amada HFB 220-3 1997 Press force: 220 tons Ijdpfx Akez Tlg Espotn Stroke length: 3000 mm Controlled axes: 8x Y1/Y2/X1/X2/R1/R2/Z1/Z2 Cylinder stroke: 180 mm Tooling: Amada Control system: Amada OP2 Graphic Total length: 3750 mm Total width: 2200 mm Total height: 1950 mm Weight: 13500 kg Operating hours: 29500

Condition: good (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 170 t, stroke length: 200 mm, table length: 3,100 mm, distance table to ram: 350 mm, clearance between the columns: 2,700 mm, total length: 4,500 mm, total width: 2,000 mm, total height: 2,850 mm, overall weight: 11,600 kg, Equipment: documentation/manual, safety light barrier, Amada HFP 170/3 CNC press brake | 2006 | AMNC-PC | Wila clamping system Machine specifications Manufacturer: Amada Model: HFP 170/3 Year of manufacture: 2006 Condition: used, in good working order Control system: Amada AMNC-PC Tool clamping system: Wila Included: 1 set of tools Dimensions: approximately 4,500 × 2,000 × 2,850 mm Machine weight: approximately 11,500 kg Location: Waanrode, Belgium Description Amada HFP 170/3 CNC press brake from 2006, equipped with AMNC-PC control system and Wila tool clamping system. The machine is used but still in good working order. One set of tools is included in the sale. The machine is being sold due to the purchase of a larger press brake. Transportation can be arranged upon request. Iodpfx Aksz S Nuqepstn Can be loaded on October 21st in Waanrode, Belgium.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Itodpsy Dfclefx Akpon Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 1992, machine/vehicle number: 56979, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, pressing force: 135 t, total length: 5,000 mm, total width: 1,200 mm, total height: 2,200 mm, overall weight: 7,500 kg, machine is functional ok, from down linear tool is one channal damage. perfect machine for starters or when a company have only periodic press jobs. we sale out by fact that we need the space. Itedpfo Aarbhsx Akpon machine is unther still on power

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 Itjdpfowybcysx Akpon specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 BENDING PRESSURE 80 TONS BENDING LENGTH 2500 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Itodpjtnz Ttefx Akpen Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations with required throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-strength briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options are possible, e.g., oil cooling for use in continuous operation. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. User-friendly operation thanks to Siemens PLC control Itodeil Hggepfx Akpsn To fulfill our promise of performance, we design and manufacture all control cabinets ourselves at our Ilsfeld location and equip them with well-known international components. This guarantees the highest quality in a compact design. The Siemens PLC control used is perfectly tailored to the requirements of the briquetting process. Foreign object-resistant conveying screw thanks to cardan suspension The conveying screw, which transports the material into the pre-compactor of the briquetting press, is suspended on a cardan joint. This prevents foreign objects from causing damage to the conveying screw. As is often the case, however, the specific application determines which suspension is chosen. For metal applications, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (liters): 250 Weight (approx. kg): 1100 Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, The VPR-4000 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-4000 press is also swiveling and mobile. Possible applications: Iedpfxoyr R Hwj Akpjtn Veneering / Form gluing / Encasing... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work surface: 4000x1500mm Pump power: 0.75 kW Vacuum pump capacity: 40 m3/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: In stock at warehouse 54634 Bitburg - free loading -

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, operating hours: 23,390 h, pressing force: 85 t, overall weight: 8,600 kg, controller model: TASC 6000, operating pressure: 300 bar, TECHNICAL DETAILS Pressing force: 85 t Pressing force: 850 kN Operating pressure: 300 bar MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Isdoz Hxtdjpfx Akpstn Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum flow rate: 4,900 m³/h Nominal flow rate: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Available at warehouse 54634 Bitburg Ijdpfx Aocdr E Ajkpetn Subject to prior sale.

Condition: good (used), Year of construction: 1995, Used press brake by Baykal Type APH 3106 120 Capacity 3100 x 120 tons Iodpfxjz Il Eps Akpetn NC control Adjustable back gauge and stroke depth Includes a set of tools

Condition: used, all stainless steel belt width 1.000 mm Isdpfx Aksz H Ul Nspetn adjustable height finished product from 2 up to 35 mm speed of the belts is separately adjustable with outfeed belt mobile 3 kW dimensions (l x w x h) : ± 2.400 x 1.200 x 1.500 mm

Condition: used, all stainless steel belt width 1.000 mm adjustable height finished product from 2 up to 35 mm speed of the belts is separately adjustable with outfeed belt mobile 3 kW Itedpfx Akez H Ummepsn dimensions (l x w x h) : ± 2.400 x 1.200 x 1.500 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 15,000 h, pressing force: 225 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, table length: 4,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, 1 used 7axis Bystronic Xact Smart 225/4100 down stroke hydraulic cnc pressbrake for sale The Bystronic Xact Smart 225/4100 is a high-precision, industrial hydraulic down-stroke CNC press brake designed to deliver high-quality Swiss bending technology at an accessible price point. It is engineered for handling heavy-duty, versatile sheet metal fabrication with consistent accuracy across its entire bed length. Key Technical Specifications The standard configuration of the Xact Smart 225 model includes the following core mechanical specifications: Pressing Force: 225 tonnes (2250 kN) for high-capacity heavy bending. Bending Length: 4100 mm (4.1 metres), providing ample room for long components. Itedpsz D D Sysfx Akpon Standard Stroke: 200 mm  Operational Features & Versatility Axis Configuration: Configured with 5-axis back gauge, total axis; 7 (Y1,Y2X, X1, R, Z1, Z2). Age: 2019 Crowning System: Features active, hydraulic, or automatic static crowning to counteract beam deflection, guaranteeing strict angle consistency over the entire 4-metre bed length. Intuitive Software: Controlled through Bystronic’s User Interfaces, utilizing a large multi-touch screen that handles 3D simulation  Delivery and installation in your works available

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SUPPLY • EBU H 12 FT eccentric press • Siegfried SPC control unit 2. DOCUMENTATION • Complete operating documentation available 3. TECHNICAL DATA Year of manufacture: 2013 Type: Eccentric press Rated force: 120 kN Iedofrzlmepfx Akpotn Max. tool installation height: 170 mm Max. weight of upper tool part: 25 kg Stroke adjustment range: 30 mm Ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: used, Vötsch Temperature testing chamber / Temperature chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C With viewing window For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature testing, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features digital temperature control, a viewing window, a test chamber made of stainless steel and a side access port for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Equipment type: Temperature testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 4.36 K/min Temperature change rate, cooling: approx. 2.6 K/min Heater renewed Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Permissible operating overpressure: 25 bar Standing pressure: 11.5 bar Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A Weight: approx. 140 kg net Equipment: Digital temperature control Temperature regulation Air-cooled design Test chamber made of stainless steel Viewing window Side access port for test specimens Front main switch RS232 interface Connections for external control Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Iedpsz R Rgysfx Akpetn Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Workshop tested with documented functional test Scope of supply: 1x Vötsch VT 7004 temperature testing chamber Design with viewing window Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type RP 3000 ----- Working width: 3000 mm Working height: 2000 mm Item 1 S&S FRAME PRESS Type RP 3000 Item 2 Centre pressure beam with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2000 mm high Item 3 Shut-off valve on the 1st vertical cylinder Item 4 Shut-off valve on the 3rd vertical cylinder Isdpoz Sd Dbsfx Akpjtn Item 5 Shut-off valve on the upper horizontal cylinder Item 6 Shut-off valve on the lower horizontal cylinder Manufacturer’s technical description: Sturdy welded frame construction made from thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole spacing. Continuous abutment on the left-hand side for width compression; lower abutment on two levels. Vertical press cylinders mounted on special pressure beams with one-handed quick-adjustment and weight compensation, height-adjustable in 50 mm hole spacing; long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via a ball-bearing-mounted carriage with central locking, fixed at 50 mm intervals. Upper horizontal press cylinder infinitely height-adjustable and fitted with weight compensation. Lower horizontal press cylinder with centring bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Pressure plate and support width 130 mm Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick-adjustment, 2 horizontal pressure cylinders d = 40 mm, stroke 80 mm double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 150 bar (corresponding to 400 to 3000 kg) vertical pressing force, with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working dimensions: 3000 mm x 2000 mm (length x height) ----- Price of the above machine on enquiry! ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Further options available on request. Please contact us for the full price list! ----- (Technical data as per the manufacturer, subject to change; the illustration may show optional equipment!) The images show a similar model. Original images are not yet available.

Condition: used, Ifsys Type: 114100 Type: VL 13 Servo press Hopper system with 2 x Vibroliner and 2 x Vibrohopper 1 x Return conveyor 2 x Control unit FC 1000 Condition: used Itedpfezd Rk Esx Akpen Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.