Used Rosewood Veneer Rio for sale (1,556)

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 3/1406, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, Veneer press, Joh. Langzauner & Sons ----- Technical data ----- Pressing area: 2,550 mm x 1,300 mm, Power per heating plate: 7,200 W, Credoy Twrkopfx Aqvji Number of cylinders: 4 pcs.

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Credpfoxhfpdox Aqvji Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: excellent (used), functionality: fully functional, Raute 2HV57-66 Veneer Peeling Lathe with log centering unit, veneer outfeed and veneer clipping shears. Technical condition: Very good, after a complete overhaul. Crsdpfx Aqozphghevei Technical specifications: - Maximum log diameter: 100 cm, 70 cm with centering unit - Maximum peeling length: 1,450 mm

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Year 2007. Crodpfx Ajvxvc Hsqvei Very good condition. Available immediately.

Condition: like new (used), Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic cylinders Clearance: 410 mm Water heating system Safety shear pin Cjdpfozxgx Ujx Aqveri

Condition: good (used), Code: 0412 Brand: ORMAMACCHINE Model: NPC/R 35/13 - CE Standard Hydraulic hot press for joinery, furniture, bespoke furnishings, veneering, panels, doors, wooden joinery, composite materials and miscellaneous items – CE Standard Sturdy construction Solid perforated steel platens 3500 x 1300 mm Fixed lower plate – Movable upper plate Plate thickness 80 mm 6 pistons diameter mm 85 Total thrust 120 ton Credj Ab T Rtepfx Aqvsi Option for either oil or steam heating Installed power 8 Kw Overall dimensions mm 4500 x 1550 x 2700 h Weight kg 10000

Condition: excellent (used), functionality: fully functional, working width 3100 mm working height 47 mm manual fence adjustment to size main motor power 4 kW cast iron body safety light barriers Crodpfjzxp Raex Aqvsi power supply 380V

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 10108, cutting length (max.): 2,900 mm, cutting width (max.): 530 mm, CASATI BIG 2600 - Double knife veneer scissors. Machine is 100% functional. Credpfjum Rpgex Aqvei

Condition: used, Used Machine Features and Technical Specifications: - Working width: 630 mm - Veneer thickness: approx. 0.4–2 mm Cjdpfx Aqo Af I Nnjvori - Feed rate: approx. 7 m/min - Table size: approx. 365 x 720 mm - With foot switch Dimensions: approx. 1050 x 630 x 400 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Shelf length: 3000 mm Codpozfgarefx Aqvori Shelf width: 1300 mm 6 hydraulic cylinders, 75 mm Clearance: 400 mm Water heating Year of manufacture: 2001 Weight: 3200 kg Overall length: 440 cm Overall width: 190 cm

Condition: excellent (used), Catalog number: 7551 TECHNICAL DATA veneer thickness: 0.4-2 mm clearance width under the frame: 920 mm foot pedal control tabletop dimensions: 1250x340 mm 2 metal pressure rollers air consumption: 6 bar rubber roller, pulling from below 2 smooth metal pull rollers motor: 0.55 kW Codpfx Aqsztwhpsvori dimensions (L/W/H): 1400x550x1500 mm weight: 205 kg – German-made – unpainted – DTR documentation included – very good condition – used stapler Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 1969, Used Machine Year of manufacture: 1969 Features and technical specifications: - Pressing area: 255 x 135 cm - Pressing force: 100 metric tons Csdpfx Aqjz Np Thovsri - Number of press cylinders: 4 - Cylinder diameter: 100 mm - Opening width: 400 mm - Press plates: gold-anodized ELKOM plates - Heating: electric - Heating capacity: 18 kW - Maximum temperature: approx. 120 °C - Weight: approx. 4,500 kg - Safety pull cord will be retrofitted

Condition: excellent (used), functionality: fully functional, glue thread sealer zigzag stitching clearance 630 mm heating element temperature adjustment Cedpfxozz N Hts Aqvsri foot pedal control power supply 230V year of manufacture 2001 CE marking

Condition: used, Year of construction: 1982, Second-hand machine Cjdpfjzk Nvtjx Aqvsri Condition: good Features and technical specifications: Cutting length (mm): 3,100 Cutting height (mm): 45 Saw blade diameter (mm): 180 Depth to stop (mm): 500 Main motor: 1.8 kW Pneumatic clamp Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: at short notice

Condition: ready for operation (used), plate length 3500mm plate width 1300mm water heating Crsdpfx Aqjzxy N Tevji 8 hydraulic pistons pistons diameter 85mm plates span 640mm outomatic opening year 1992

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Credpfx Aqouna E Hsvsi

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 141012/1, Equipment: CE marking, The machine is designed for efficient gluing and pressing of veneer edges, with continuous material feeding. It is suitable for carpentry and furniture production, where precise and stable edge processing is required. It features a robust construction, simple operation, and reliable performance. Crsdpozg Dt Ssfx Aqvji

Condition: used, Year of construction: 1978, used good condition cleaned functionality tested Manufacturer: Bürkle Type: U 88 Year of manufacture: 1978 Machine no.: 3102629 Safety tested (GS certified) Touch control Safety cable on top Electric heating Specific maximum pressing force: 80 t Aluminum plates glued Lower piston Quantity: 6 Plate size approx. mm: 2550 x 1300 Opening width approx. mm: 400 Piston diameter: 70 Space requirement approx. L x W x H approx. mm: 3100 x 1500 x 1900 Cedpfxjzkl Ifo Aqvsri Weight approx. kg: 4000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: new, Year of construction: 2023, functionality: fully functional, KUPER FWM 630 NEW CONDITION (not used) veneer splicing machine for sale! Accessories for start up included. Year of manufacture 2023 Stand projection 630 mm Veneer thickness approx. 0.4-2 mm Feed speed 7 m/min Zigzag stitching Codpfx Aqoz Hcabsvjri Heating head approx. 90 W Foot pedal control Power supply 230 V CE marking (Original operating instructions in german) Gross wight approx. 40 kg Space required (L x W x H) approx. 890 x 365 x 475 mm

Condition: excellent (used), Working width: 300 cm Cedpozvn Dgjfx Aqvsri Cutting height: 4 cm Pneumatic clamp 1.8 kW motor

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Product size max. 2500 x 1200mm Oil heating. Total power 21,7 KW at maximum. Cjdpfxju E E A Te Aqvjri Very good condition. Available immediately.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar Crjdoz Akftepfx Aqvei -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Router motor power: 1.1 kW Voltage: 380 V

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher + Rückle AFD-35/2600 – Double-Knife Veneer Guillotine Industrial heavy-duty hydraulic double-knife guillotine designed for precise longitudinal cutting and trimming of veneer sheets. Designed for industrial veneer processing, ensuring precise cutting, automatic positioning, and programmable cutting sequences. Technical Specifications Manufacturer: Monguzzi, Italy Brand: Fisher + Rückle Model: AFD-35/2600 Year of manufacture: 2006 Cutting length: 2,600 mm Cutting system: Double-knife, hydraulic Control system: Computerized with programmable functions Operating modes: Manual and automatic programmed operation Pressure beam: Hydraulic Number of motors: 3 Cjdpsy Tm Tkjfx Aqvori Installed power: 9 kW Power supply: 400 V / 50 Hz Weight: 7,000 kg CE marking: Yes

Condition: used, Year of construction: 1987, used, top condition, low hours Manufacturer Bürkle / Joos HP 60 Completely overhauled by Joos in 1987, safety interlock Model S60/250/130 Year of manufacture 1987 Machine no. 63/310777 1 deck Plate size: 2500 x 1300 mm Opening height: 290 mm Tip control Safety cable underneath Electric heating Max. specific pressing pressure 2.5 kg/cm² Bonded aluminium plates Piston diameter: 60 mm Bottom piston & piece Space requirement approx. 3000 x 1500 x 1800 mm Weight approx. 3000 kg Cjdpfx Aqjythdpjveri Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as inspected, in current condition, without warranty or guarantee

Condition: like new (used), Thread splicer with glue Zigzag stitching Heater with air blowing Crsdpozq D I Dofx Aqvei Pedal control 380V power supply