Used Sectional Door for sale (12,748)

Condition: excellent (used), Affordable sectional door from Swiss demolition, 8 m wide, 4.2 m high, with door. Pgodpfxox Tbhcj Akisu

Condition: good (used), Approx. 15 units of 5-section wardrobe with bench, C+P – used: Price per unit: €500 (net), disassembled, packed, and loaded at the location! Manufacturer: C+P Möbelsysteme Type: S 3000 Evolo Pgedpezqzpljfx Akiou Year of manufacture: unknown Dimensions: H 1850 x W 1480 x D 500/815 mm with 150 mm high feet and pre-assembled bench, bench slats made of beech, with integrated height adjustment, 5 compartments, compartment width 300 mm, 5 shortened doors, suspension on pivot bolts, safety swivel lock for padlock with lock protection. Condition: good Available: immediately Location: Leipzig

Condition: used, Year of construction: 1998, - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Door pressing system Manufacturer: Wild Year of manufacture: 1998 For door dimensions: - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Consisting of the following sections: 1. Continuous door panel gluing with frame assembly station / 2. Pressing line with hardboard facing station Section 1 consists of: - Gantry loading system - Angle transfer with longitudinal and cross saws - Loading and feeding of the longitudinal and transverse frame parts from magazines - Longitudinal cutting station for the longitudinal frame parts - Connecting station of the frame parts with the door panel core. With clamping devices - Conveyor belt angle transfer with shuttle transfer of the door panel cores onto the glued hardboard Pedpfxezuzgrs Akiegu Section 2 consists of: - Loading of the hardboard - Brush cleaning machine - Hardener application machine from below - Glue application machine from below - Roller conveyor - Angle transfer for the lower hardboard - Vacuum reversing device for the upper hardboard - Automatic facing station for hardboard and door panel cores - 2 door presses, each with 2 x 4 pressing stations, arranged parallel to each other - Both presses are loaded at the infeed with 1 shuttle loading basket - Both presses are unloaded at the outfeed with 1 shuttle unloading basket - Angle transfer to the infeed into a hedgehog buffer - Angle transfer at the outfeed of the hedgehog buffer and feeding to the stacking station - One-sided vacuum stacking with protective plate space Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Pgodpfx Akowt R Dmsisu

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm Psdpfo Aa Iqxox Akiegu L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: used, functionality: fully functional, Year of construction: 2001, machine/vehicle number: 10730, control type: manual, degree of automation: manual, actuation type: electric, overall weight: 2,400 kg, total length: 2,310 mm, total width: 1,200 mm, total height: 2,050 mm, Equipment: CE marking, emergency stop, foot remote control, The machine is used but in working condition. On-site testing is possible. I can send more photos and a video. Sold without warranty or guarantee. Pjdpoz Iwh Aofx Akiegu

Condition: ready for operation (used), Peddinghaus Model 210 Super 16 / Profile Steel Shear - COMPLETE TECHNICAL DATA, SEE PHOTO - Punching force 860 - 900 KN (86-90 tons) - Punching capacity max. 31mm / 20mm thickness - Reach approx. 510mm - Punching stroke max. 29mm - Stroke rate 40-45 strokes / minute Material capacity (shearing & notching) - Round steel up to max. 50mm - Square steel 40x40mm Pgodpfx Aez Dq Tkjkisu - Angle iron (L-profile) 140x140x13mm - Notching (I & T steel up to 80x14mm) - Drive power 4 KW - WITH PUNCHING TOOLS & Punches & Spare blades - Foot switch - DOCUMENTATION Dimensions: L x W x H 2.1 x 0.8 x 2.2 meters / Weight 3700KG Subject to errors / typographical errors

Condition: used, Year of construction: 2011, You are bidding on: a branded folding press from a very reputable and well-known manufacturer – Geka. Pgsdpfx Asyk H E Tjkiou Device features: - Folding press - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2 mm (iron sheet; greater possible for aluminum, zinc, etc.) - Machine bends pneumatically via foot pedal - 15 cm front rail removable, leaving a 1 cm rail (desired by many; together 2.5 cm) Guillotine shear HT 200 or Schröder electric guillotine shear, 2 m – 2.5 mm ... manual lever shears also optionally available. Important: Optionally, you can find and purchase a wide range of machinery and machine accessories (e.g., different rails, depth stops) for sheet metal and steel processing in our shop. This includes folding presses, guillotine shears, drill presses, slip rollers, slitting and profiling machines, and corresponding accessories (beading devices, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers. Feel free to contact me with any questions. You will receive an invoice with VAT shown separately. Free loading is available – weight approx. 850 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise—we will be happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.

Condition: used, functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 300 mm, drill spindle length: 1,100 mm, working range: 2,700 mm, working width: 1,000 mm, type of input current: three-phase, total height: 1,400 mm, input voltage: 380 V, ANUBA MILLING MACHINE, MODEL LARI & LARI, MODEL F50 FULLY FUNCTIONAL MACHINE WITH CE CERTIFICATION Pgedpfx Akj Adq Unoiou THE MACHINE IS STILL LOCATED AT THE USER’S SITE AND AVAILABLE FOR INSPECTION AND TESTING PLEASE CONTACT US FOR MORE INFORMATION

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm Pjdpfjz Ix Ukox Akisgu • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: excellent (used), Equipment: foot remote control, Capacities: Force: 60 tons Punching: Ø28 x 15 mm Ø38 x 11 mm Shearing of flat material: 200 x 20 mm 300 x 15 mm Angle iron: 120 x 120 x 12 mm Pgjde Adrcyepfx Akisu Solid material: Ø 40 mm 35 x 35 mm Length stop is included with the machine.

Condition: good (used), Year of construction: 2015, pressure 60.0 t punching cross-cut in cmm 28 in 15 / 38 in 11 mm Psdpfx Akj Aa A Ifjisgu square edge steel 35 x 35 mm L-beam 120 x 120 x 12 mm round bar steel 40.0 mm flat steel 200 x 20 / 300 x 15 mm blade length 317 mm throat 220 mm work height max. 940 / 1140 mm strokes per minute max. 26 work stroke max. 55.0 mm oil volume 23.0 ltr. total power requirement 4.0 kW weight of the machine ca. 1440 kg Dimensions (HxWxD) 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Punching station, flat steel shear, . angle/profile steel shears, notching station - heavy-duty and stable welded construction - infinitely variable stroke adjustment - very compact design - support table at notching and punching stations - side support tables - 1x freely movable control panel - Emergency stop button - Operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2011, machine/vehicle number: 606411, cutting range flat at 90° (X-axis): 600 mm, cutting range flat at 90° (Y-axis): 15 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 90°: 55 mm, cutting range angle steel at 45° (X-axis): 80 mm, cutting range angle steel at 45° (Y-axis): 10 mm, cutting range angle steel at 90° (X-axis): 150 mm, cutting range angle steel at 90° (Y-axis): 18 mm, sheet thickness (max.): 13 mm, Equipment: foot remote control, We offer this used Kingsland Multi 125 shearing machine for profiled steel, manufactured in 2011. Year of manufacture: 2011 Punching – dimensions: 35 × 25; 57 × 16; 30 × 20; 38 × 15 mm Bending capacity for flat bar: 250 × 22 mm Shearing of flat bar: 380 × 25; 600 × 15 mm Shearing of angle profile at 90°: 150 × 18 mm Shearing of angle profile at 45°: 80 × 10 mm Cutting of round bar: up to Ø 55 mm Pjdpfx Asz D Tf Askisgu Cutting of square bar: 50 × 50 mm Cutting with extra blades: up to 200 mm Notching – rectangular: 60; 100 mm Notching with additional tools: 80; 90 mm Maximum material thickness: 13 mm If you have any further questions or require more information, please send us a message or call us.

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Round bar 45 mm Square bar 45 mm Punch ø40 x 14mm Pgjdpfx Aozurz Hekiou Double-acting Equipped with an automatic side stop Weight approximately: 2500 kg

Condition: excellent (used), color: grey, Container box / container with French door Internal dimensions: Length: 4.0 meters Width: 2.3 meters Height: 0.6 meters ==> 5.5 cubic meters Loading floor thickness: 5 mm Side wall thickness: 4 mm Cevoman bv. Lenskensdijk 5 Psdpfozldugox Akiegu 2200 Herentals Belgium

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: HIW1000/610-201, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, quick-change device, For sale is an extremely powerful and versatile hydraulic universal punching and shearing system from the German premium manufacturer Mubea (Muhr und Bender), model HIW 1000/610. This dual-cylinder machine allows for independent operation at the stations and offers a tremendous punching force of 100 tons (1000 kN) with an extra-deep throat depth of 610 mm. The system is CE-certified, manufactured in 1997, and is ideally designed for heavy-duty applications in steel construction, metalworking, and industrial manufacturing. Technical data: • Manufacturer: Mubea (Muhr und Bender) Pgjdpfxo Adzcis Akieu • Model / Type: HIW 1000/610 • Machine No.: HIW1000/610-201 • Year of manufacture: 1997 • Connection voltage: 400 V / 50 Hz (3 phases) • Control voltage: 24 V • Punching force: max. 1000 kN (100 tons) • Throat depth: 610 mm • Machine weight: 3,150 kg • CE marking: Present Performance data & capacities (for material with 450 N/mm² tensile strength) • Flat steel shear: • max. 600 x 15 mm • max. 400 x 20 mm • Profile steel shear (C- and I-profiles / flanges): • S = 13 mm • B = 60 mm • T = 90 mm • Angle shear: • 90°: max. 160 x 16 mm • 45°: max. 70 x 7 mm • Bar steel shear: • Square bar (☐): max. 50 mm • Round bar (◯): max. 50 mm • Hole punch: • max. Ø 40 mm in 22 mm material thickness Includes a large amount of accessories and a length stop.

Condition: good (used), pressure 50.0 t punching cross-cut in cmm 27.0 in 14.0 mm ST round bar steel 32 + 17 mm square edge steel 30 + 18 mm L-beam 100 x 10 mm throat 200 mm shear: flat material 190 x 10 mm blade length 200 mm stroke - stepless adjustable 10 - 28 mm stroke 14 - 28 H/min total power requirement 4.0 kW weight 900 kg range L-W-H 950 x 650 x 1730 mm from a maintenance workshop in good condition (!!) Pgjdpfxo Aa A H Uo Akiju Equipment: - Compact electro-hydraulic combined structural steel shear * with notching station * with punching station * flat bar shear * angle steel shear * round and square bar shear - Support table at the notching station - Support table at the punching station - Stripper at the punching station - 1x mobile foot switch - Assortment of various punches and dies - Original operating manual

Condition: excellent (used), punching pressure 70.0 t punch diameter 26.0 in 20.0 mm punch diameter 57.0 in 9.0 mm throat 305 mm round bar steel 45.0 mm square edge steel 45.0 x 45.0 L-beam 130 x 13 mm shear: flat material 300 x 20.0 / 375 x 15 mm blade length ca. 380 mm Pedpfx Ake Aa A Ileiogu adjustment of stroke 0 - 55 mm strokes per minute 34 work height max. 1030 / 890 mm rectangle notching till max. 10.0 mm ST voltage 400 V total power requirement 5.5 kW weight 1620 kg dimensions 1700 x 1000 x 1800 mm Well-maintained condition (!!) Current new price ~ 20.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Equipped with multiple workstations: * Punching station * Flat bar shear * Angle/profile steel shear * Notching station - Infinitely adjustable stroke length - Very compact design - Support table at the notching and punching stations - Lateral support surfaces - 2x mobile foot switches - Connection cable + plug Special accessories included: - Electric contact-actuated length stop

Condition: used, punching pressure 36.0 t punch diameter 27.0 in 10.0 mm throat 170 mm round bar steel 30.0 mm L-beam 80 x 80 x 8 mm square edge steel 25 x 25 mm shear: flat material 350 x 6 / 200 x 13 mm blade length 356 mm strokes per minute ca. 24 pro Min work height max. 980 mm oil volume 30.0 l voltage 400 V total power requirement 2.2 kW weight 485 kg dimensions 1200 x 800 x 1500 mm From a maintenance workshop Original price of base machine ~ 12.000 euros Pgjdps Aa A H Iofx Akiju Special price upon request Features: - Compact electro-hydraulic structural steel shears - Punching station, flat steel shear, angle/profile steel shear - Sturdy welded construction - Very compact design - Side support surfaces - Various punches and dies (red metal box) - 1x freely movable foot switch - Emergency stop button - Operating instructions (PDF)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, TECHNICAL SPECIFICATIONS • Punching force: 850KN / 85 tons • Punching: Ø40x15mm • Cuts per minute (stroke 20mm): 40 • Throat depth: 500mm • Stroke: 70mm • Cutting of L-shaped profiles at 90º: 120x120x10mm • Flat bars: 450x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 130x130x12mm • Bending: 200x12mm • Motor: 9KW Pgsdpfjzg Dxbex Akiju • Net weight: 2500Kg

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- Pgjdpfx Ajy Hl Iyekiju - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), mileage: 136,032 km, power: 184 kW (250.17 HP), first registration: 12/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,820 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro6, number of seats: 3, total length: 7,900 mm, total width: 2,350 mm, loading space length: 6,370 mm, loading space width: 2,470 mm, loading space height: 2,190 mm, Equipment: ABS, AdBlue, central locking, cruise control, electric window regulation, power mirror, spoiler, trailer coupling, = Additional options and accessories = - 3 chairs - Aluminum fuel tank - Beacon(s) - Radio - Rear doors - Roof Spoiler - Side door - Stairs - Sun visor = More information = General information Number of doors: 2 Year of construction: 2013 Cab: single Registration number: 38-BDL-8 Technical information Number of cylinders: 6 Engine capacity: 6.728 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 8.075 kg Carrying capacity: 4.015 kg GVW: 11.990 kg Max. towing weight: 26.000 kg Pgedo Afpx Iopfx Akisu Functional Extendable superstructure: Yes Maintenance, history and condition APK (MOT): tested until 01/2027 Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2006, Equipment: emergency stop, foot remote control, Capacities: Pedpfx Aj Adrfzekisgu Force: 40 tons Punching: Ø32 x 11 mm Cutting of flat material: 200 x 13 mm 300 x 10 mm Angle iron: 80 x 80 x 8 mm Solid material: Ø 30 mm 30 x 30 mm Includes length stop.

Condition: used, machine/vehicle number: 007901, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Pgjdpfozwmbaox Akiou Position 2: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 3: Batch 1 edge banding machine for doors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 5: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 6: Single Edgebanders FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 7: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE

Condition: used, - Dimensions: 1210x700x1330 mm Pgjdoy If Uvspfx Akieu - Table dimensions: 900x480 mm - Model: KMN2-MUL-W - Serial number: 0061355KMN2 - Capacity: 281 L - Temperature range: -2°C to +8°C - 9 pans - 2 doors - Year: 2020 - Refrigerant gas: R134A - Glass construction - Space for 9 pans - Adjustable temperature - Digital display - Voltage: 220V - Power: 360W - Weight: 153 kg