Used Rim for sale (2,831)

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. Iedpfx Afozuyg Rousih The system is offered in its current condition and with the components shown in the pictures.

Year of construction: 1980, condition: used, Shearing jaws. Ijdpfx Afszr Iphsujih

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 50 kg, total height: 2,300 mm, total length: 1,500 mm, total width: 1,500 mm, type of input current: three-phase, rotary table diameter: 700 mm, table load: 50 kg, The device is designed to measure radial and axial runout of rims within specified value ranges. The measurement system consists of left and right supports, which can move forward and backward within a range of 330 mm and up and down within a range of 170 mm. This enables simultaneous measurement of the rim at 4 points. The device can operate in manual and automatic modes. Ijdow Hwxwjpfx Afujih

Condition: used, functionality: fully functional, Tires, wheels, and rims Condition: Ready for use and fully functional Technical condition: New Ijdpfx Aez Ewihsfuoih Front tire type: Superelastic Front tire size: 48.5x14-24 Description: Superelastic tire MonoMatic: 48.5x14-24 RIM 11.25 (355/85-24)

Condition: good (used), Year of construction: 2000, functionality: fully functional, LA MACCHINA UTENSILE s.r.l. – FVA 20" PR 180° Automatic wheel brushing machine for processing and deburring aluminum rims. Technical data Ijdpfjw Rrwzsx Afujih Manufacturer: LA MACCHINA UTENSILE s.r.l. (Italy) Model: FVA 20" PR 180° Serial number: 2100 Year of manufacture: 01/2003 Machine weight: 3,000 kg Mains voltage: 400 V Frequency: 50 Hz Connected power: 19 kW Rated current: 40 A Max. operating pressure: 50 bar CE marking: Yes Machine description Automatic brushing machine for the post-processing of aluminum rims Processing of rims up to 20 inches Two opposing brush units (top/bottom) Digital adjustment of: Brush speed (top) Brush speed (bottom) Brush current (top) Brush current (bottom) Automatic rotary table / workpiece positioning Pneumatic or hydraulic workpiece clamping PLC-controlled processing Application area The machine is used for: Removing burrs Cleaning wheel contours Brushing the spokes Surface finishing after casting or machining Preparation before painting or final inspection

Condition: ready for operation (used), Year of construction: 2000, Müller Martini Amyrs/Prima Year 2000, 8 stations, 1 cover feeder, stitching, three-knife trimming, stacker Production capacity: 14,000 units/hour Min. format: 90 x 105 mm Iiodpfx Afjy Sipreush Max. format: 320 x 480 mm

Condition: excellent (used), Year of construction: 2016, Offer for KP-500 Optim KP 500 Optim, year of manufacture 2016 - Infeed table length: 5.2 m - Main motor: 5.5 kW - Outfeed table length: 6.0 m, can be shortened if necessary Still in production, very little used (virtually unused). For more information, see the link. Iijdpsy U E Hxofx Afuoh

Condition: used, Year of construction: 2024, controller model: , _____ Description: Year of manuf. : 2024 Punch Model:Dynamic Version Max. sheet size without repositioning:3,100 × 1,550 mm Positioning speed (X/Y axes):1,500 mm/s Max. punching speed:900 1/min Laser power:4 kW (IPG) Revolver :-20 stations, 10 of which are rotatable :-1× MT16 multi-tool station :-1× MT6 multi-tool station, rotatable :-Thread forming station :-Forming station Features :-Automatic die adjustment :-Camera monitoring :-Remote control panel :-Accessory kit Isdoz Exv Nopfx Afuoih :-Nitrogen purge :-Locking cylinder for R-Multitools :-Multithread lubricator, tool lubrication :-Punch part flap :-Small laser part flap :-Large laser part flap :-Scrap conveyor belt

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, Raptor Hypersonic Spray Applicator The spray applicator is used to fill surface shrinkage/damage in different materials, for example, it is perfect for the regeneration of aluminum rims. With this technology we can fill the gaps without heating the sputtered element. The surface after sputtering is suitable for grinding or turning and has no internal pores, which means that no craters form on the surface of the element after processing. Specification: Air pressure: 6 - 7 bar Minimum air consumption: 0.5 m³/min Power supply: 230 V Power consumption: 3300 W Tank capacity: 200 grams Weight: 8.5 kg Rim repair sprayer, surface filler, metal cavity filler, aluminum cavity filler, damage filler, rim repair, rim refurbishment, rim doctor, rim clinic, curb damage, FELGENMASTER, rim technology, rim broken, pothole and damage, corrosion damage, corrosion, Iiodpsvx Ht Njfx Afuoh

Year of construction: 2026, condition: like new (used), functionality: fully functional, Equipment: all wheel drive, 3rd Gen 3-in-1 Manual Tire Changer The EZ Tire Changer 3rd Gen Manual Tire Changer is a heavy-duty, portable tire changing tool compatible with 12" to 21" wheels. No electricity or air compressor required — ideal for home garages, off-road enthusiasts, and mobile tire service. Formerly sold as the LCTX 3rd Gen — same machine, same spare parts, same factory. Features a reinforced steel frame for durability, ergonomic lever design for reduced effort, and a universal hub adapter for broad vehicle compatibility. Works with passenger cars, SUVs, light trucks, and ATVs. Easy to assemble and store. A cost-effective alternative to professional shop equipment. Compatible wheel size: 12"–21" No power or air compressor needed Heavy-duty steel construction Universal hub adapter included Portable and easy to store ✓ 12–21″ rims Fits most vehicles ✓ 100% manual No power, no compressor ✓ 45% less effort Progressive leverage ✓ 14-piece kit Everything included Why choose the 3rd Gen? The LCTX 3rd Generation is a fully manual 3-in-1 bead-breaker, demount and mount station. It runs on nothing but leverage, so it works in a garage, on a track, at a trailhead or on the hard shoulder. No power, no compressor — 100% manual progressive leverage 45% less effort — long-handle pivot design multiplies your force Zero-damage duck head — rounded contact surfaces glide along the rim No permanent bolting — stable base, set it down and work Run-flat ready — leverage pull-rod handles stiff sidewalls Iodpfx Asz Sx Itofusih Packs down — 60 × 34 × 16 cm, fits in a car boot

Condition: excellent (used), mileage: 134,168 km, power: 485 kW (659.42 HP), first registration: 07/2024, fuel type: diesel, tire size: 385-65 R22.5 X11.75, axle configuration: 6x4, wheelbase: 3,350 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,690 mm, total width: 2,550 mm, total height: 3,720 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Equipment: AdBlue, Bluetooth, air conditioning, cruise control, fridge, navigation system, retarder, seat heater, spoiler, - Adaptive Cruise Control - Aluminum Fuel Tank - Android Auto - Apple CarPlay - Ventilated Seats - DAB Radio - Roof Spoiler - Tilting Hydraulics - Air Suspension - Rearview Camera - Sleeper Cab - Side Skirts - Lane Keeping Assist - Blind Spot Monitoring General Information Year of Construction: 2024 Technical Information Number of Cylinders: 8 Engine Displacement: 16,353 cc Iedpfx Aoz Dh U Esfujih Axle Configuration Brakes: Disc Brakes Suspension: Air Suspension Front Axle: Tire Size: 385-65 R22.5 X11.75; Max. Axle Load: 8000 kg; Steerable; Tire Tread Depth Left: 80%; Tire Tread Depth Right: 80% Rear Axle 1: Tire Size: 315-70 R22.5 X 9.00; Max. Axle Load: 9500 kg; Tire Tread Depth Left: 80%; Tire Tread Depth Right: 80% Rear Axle 2: Tire Size: 315-70 R22.5 X 9.00; Lift Axle; Max. Axle Load: 9500 kg; Tire Tread Depth Left: 80%; Tire Tread Depth Right: 80% Weights Unladen Weight: 10.4 kg Payload: 15,726 kg GVW: 26,000 kg Condition Technical Condition: very good Optical Condition: very good Damage: none Additional Information Please contact Jeroen Kuipers or Job van Eldik for further information. Curious about what we can do for you? Contact our sales team today! Our team of experienced specialists is available to you every day to help you find the right vehicle. Would you like to see for yourself? Simply arrange a test drive and experience the vehicle. At KW-Automotive, you will find a large selection. We always have at least 50 high-quality light commercial vehicles and trucks in stock. This way, you are guaranteed to find a vehicle that meets your requirements and your budget. Every year, we support hundreds of satisfied customers – both in the Netherlands and abroad. Why KW-Automotive? Personalized Service Reliable Vehicles Attractive Prices Fast Delivery, So You Can Get Started Right Away Fast Communication via Phone and WhatsApp Sales and Delivery Also to Foreign Countries For many years, we have been a reliable partner for our customers – and we are proud of that. Please note: All sales prices are plus preparation and delivery costs. Would you like to learn more about a specific vehicle? Visit our website with detailed information, videos, and technical details. Do you need a quick answer? Just write to us via WhatsApp! We will promptly send you further information, photos, or a video. Job van Eldik

Condition: excellent (used), Year of construction: 2018, Ref:11150 . 2018 Horizon HT-30C Trimmer For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including knives, tools and accessories. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Iisdpfez Elvvsx Afush Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Iiedpfxjz Ek S Ae Afujh Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible Iedpfx Ajz Elvpofueih

Condition: new, Year of construction: 2026, CNC Lathe for Alloy Wheel Refurbishment This advanced CNC lathe is an indispensable solution for the refurbishment and precision machining of alloy wheels. It enables professional surface finishing, removal of damage, and restoration of wheels to a like-new appearance. The machine is equipped with an advanced CNC control system that allows fast programming of machining cycles while ensuring outstanding repeatability and excellent surface quality. Its compact footprint and ergonomic design make it easy to integrate into any workshop environment. It is the ideal choice for professionals seeking a productive, reliable, and highly accurate solution for alloy wheel refurbishment. Technical Specifications Parameter Specification Maximum Swing Over Bed 710 mm Maximum Wheel Diameter 28 in Spindle Nose A2-6 Iiodpfx Afezpwzhsuoh Spindle Bore 60 mm Chuck Manual Maximum Spindle Speed 1,500 rpm Motor Power (S1) 4.5 kW Equipment (Depending on Configuration) G-code CNC control Special wheel chuck for wheels up to 28 inches Wheel profile optimization software package Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance Available CNC Control Systems Siemens SINUMERIK 808D Siemens SINUMERIK 828D Fanuc Oi-TF Professional CNC Control Systems The CNC Alloy Wheel Refurbishment Lathe is available with professional control systems from leading manufacturers including Siemens, Fanuc, and GSK. These systems provide exceptional precision, reliability, and flexibility, making them suitable for both simple machining operations and complex production processes. Siemens SINUMERIK 808D An economical CNC control designed for entry-level CNC lathes and machining centers, ideal for small and medium-sized workshops. Key Features Intuitive graphical interface with Teach-In programming for fast operator training Reliable industrial design resistant to dust and moisture Easy integration with Siemens servo drive systems Low power consumption and minimal maintenance requirements Cost-effective solution for first-time CNC users Siemens SINUMERIK 808 Advanced A modern CNC controller offering enhanced functionality while maintaining simple operation. Benefits User-friendly interface suitable for smaller workshops Rugged industrial construction Cost-effective solution for standard turning and milling applications Improved performance and programming flexibility Siemens SINUMERIK 828D A high-performance CNC system designed for demanding machining applications. Key Features Powerful processor for dynamic machining operations Advanced turning cycles and optimized tool paths CAD/CAM integration for streamlined production Expandable architecture supporting additional machine functions Excellent performance for both prototype and production environments Fanuc Oi-TF One of the world's most trusted CNC control systems, recognized for its reliability and precision. Key Features Outstanding stability during continuous production Advanced turning cycles for threading, grooving, and precision machining Fast and intuitive programming interface Proven reliability with low maintenance requirements Ideal for high-volume industrial applications

Condition: like new (used), Year of construction: 2016, load capacity: 210 kg, arm reach: 2,700 mm, control cabinet width: 80 mm, control cabinet height: 110 mm, ROBOTIC ARM MANUFACTURER: KUKA MACHINE TYPE: KR210 R2700 PRIME TECHNICAL SPECIFICATIONS PAYLOAD: 210 kg REACH: 2700 mm CONTROLLER: KRC4 DELIVERY FROM GERMANY WAREHOUSE Iisdpfxoz Szmlj Afuoh

Condition: excellent (used), Year of construction: 2020, Ref: 11147 . 2020 Horizon HT-80 Three-Knife Trimmer Fully automatic three-knife trimmer designed for short-to-medium-run and digital/book-of-one production. Can work offline or inline with Horizon binders up to 1,000 cycles/hour, 51 mm book thickness, automatic setup and book-of-one capability Features: Automatic size setup via colour touchscreen: input the untrimmed and finished book dimensions and the machine automatically positions the relevant sections. Servo-controlled jogging and clamping provide accurate registration, while the swing-knife cutting action is designed to give a clean three-side trim. Also capable of book-of-one production. Books of the same finished size but different thicknesses can be processed consecutively It can run inline with Horizon BQ-470, SB-07 and SB-09S systems, as well as offline. Specification: Untrimmed book size – Max. 330 × 330 mm Untrimmed book size – Min. 145 × 105 mm Iedpfoz Akmkox Afusih Finished book size – Max. 300 × 300 mm Finished book size – Min. 139 × 99 mm Book / trim thickness: 1–51 mm Maximum head & foot trim: 30 mm each Maximum fore-edge trim: 30 mm Production speed: 400–1,000 cycles/hour Clamping pressure: 4–8 kN, up to 10 kN depending on conditions Clamp drive: Servo motor Standard formats: A4, A5, 8.5 × 11", 5.5 × 8.5" Job memory: 200 jobs Dimensions: 1,610 × 2,610 × 1,515 mm W × D × H Power: 3-phase, 200–230 V, 50/60 Hz; 380/400/415 V versions via transformer

Condition: new, Year of construction: 2025, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion coating), intermediate drying, an electrostatic coating zone (booth/powder coating station), and a curing oven. The workpieces are transported through the system by a conveyor system. Our company, ROMER®, plans, manufactures, and assembles complete powder coating lines. Our systems can be inspected and tested at our facility in Hürth near Cologne. Iodpfx Afocv Nl Rsuoih Request a quote for a system tailored to your specific application.

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Continental, Tires with rim (4 pieces) -Tire size: 23x9-10 PR IC30 -Bolt circle: Ø 147 x 19 mm Ijdpfxoyx Du Ao Afusih -Hub bore: Ø 110 mm -Delivery/Price: complete -Dimensions: Ø 530 x 220 mm -Weight: 53 kg/unit

Condition: used, Year of construction: 2005, Year of manufacture: Nov 2005 USED SEMITRAILER RIMS 11.75 / 22.5 FOR TIRES 385/65 / 55 R 22.5 Ijdpfx Afjxvydxeusih

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) Iiodpfxey St U Se Afuoh _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 Iodpfxox Ah Ewj Afueih

Condition: new, Year of construction: 2027, POWDER COATING SYSTEM FOR CAR WHEELS AND RIMS Oven contains 4 pieces of 22’ wheel rims in 1 batch COMPONENTS OF THE PLANT: * 1.5x1x1.3m POLYMERIZATION OVEN, 18KW ELECTRICAL * VFK-2 ONE-SIDED POWDER COATING CABINET * OVERHEAD CONVEYOR AND LOAD TROLLEYS Iodpfx Aovv Rfdjfusih Delivery: 6-8 weeks EXW Istanbul factory Assembly and training included We offer the best technical solutions and competitive prices Contact us for more information and quotations

Year of construction: 2000, condition: used, NIC TIRES. Iijdpfx Afjx Ah Ekoueh

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 Iedpfox Ahf Rsx Afujih 4 TRAILERBANDEN 8,9 EN 12 MM PROFIEL DIEPTE.