Used Recoiler Mandrel for sale (415)

Year of construction: 2004, condition: used, controller manufacturer: SIEMENS, pipe diameter (max.): 90 mm, pipe length (max.): 3,000 mm, wall thickness: 8 mm, CONTROLS .. SIEMENS FEEDSTOCK TUBE .. external diameter min.: 10 mm .. external diameter max.: 90 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 8 mm .. length min.: 150 mm .. lenght max.: 3000 mm Integrated Tube Cutting Line – Standard Configuration The integrated tube cutting line is a fully automated system for the precise processing of tubes and profiles. It combines cutting, brushing/deburring, washing, drying, measuring, and stacking into one continuous process. All workpieces are 100% inspected within the line for length, inner and outer diameter, and defective parts are automatically sorted out. System Components Bundle loading magazine Tube separation unit Sawing unit Brushing and deburring machine Washing machine with dryer Length measurement control Outer and inner diameter inspection (Keyence sensors, measuring mandrels up to 500 mm) Stacking handling with magnetic gripper Safety devices (protective fence, light barriers, etc.) The bundle loading magazine is designed for tube lengths up to 9 m. The system allows for damage-free separation and positioning of the tubes. After cutting, the tubes are deburred, cleaned, dried, and automatically stacked for further transport. Main Technical Data Specification Value Overall length approx. 13,000 mm Width approx. 3,600 mm Height approx. 2,350 mm Floor load approx. 1,500 kg/m² Operating temperature 15 °C – 40 °C Relative humidity max. 90 % Connection Requirements Electrical: Control system: Siemens 840 D Installed power: approx. 125 kW Fuse protection: 200 A Power supply: 3 × 95 mm² + 1 × 50 mm² PEN (IEC 364-4-41 / VDE 0100 Part 410) Pneumatic: Compressed air: approx. 3.5 m³/min, 6–10 bar (dry and filtered) Water: ¾" water connection for washing machine with dryer Filling volume: 1,400 l Tube Processing Parameters Parameter Value Max. bundle weight 5,000 kg Outer diameter range 10–90 mm Wall thickness 0.8–8 mm Tube shape Round and profile tubes Raw material length 3,000–9,000 mm Cut lengths 150–3,000 mm Material Steel, stainless steel, Docol 800 DpAg, 26MnB5, 34MnB5 Max. saw blade width 3 mm Measuring and Inspection Systems Length measurement: Keyence sensor with SPC evaluation Inner/outer diameter inspection: Measuring mandrels with force detection (1–100 N) Repeatability: ± 0.1 mm Data analysis: PC-based evaluation software including documentation Performance Data Processing speed depends on tube diameter, length, and material Max. part weight per cut: 25 kg Hedpfx Ajxnim Toacsnu Machining accuracy: ± 0.05 mm + saw blade tolerance (max. ± 0.10 mm total) Max. stacking weight: 45 kg Positioning accuracy for stacking: 0.5 mm Corrosion Protection All machine and safety components are finished with a high-quality base coat. Machine color: RAL 5010 (Forster Blue) Safety guards: RAL 1003 (Signal Yellow) Special Features Fully automated workflow from bundle loading to sorted stacking SPC-controlled measurement and documentation system Carbide-compatible sawing technology High process reliability with integrated inspection and monitoring systems Compact design with excellent machining precision

Condition: good (used), Year of construction: 2000, Ref. -No.: 10609 Manufacturer: GLEASON - PFAUTER Type: P 2400 G Year of construction: 2000 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany X-Axis: 1200 mm Y-Axis: 0 mm Z-Axis: 1000 mm Table Diameter: 2500 mm Workpiece Diameter: 2640 mm Grinding depth: 80 mm Machine length: 11000 mm Machine width: 6585 mm Machine Height: 5200 mm Clamping Length: 375 mm Max. Dia. Of Grinding Wheel: 400 mm Max. Table Load: 40000 kg Grinding Wheel Width: 80 mm Grinding spindle - speed: 600 bis 6000 RPM Machine weight: 200 kg Feed rate X-axis: 00 mm / min Feed rate Y - axis: 5000 mm / min Table Rpm: 4,5 min-1 Clamping diameter max.: 350 mm Milling cutter diameter max.: 2800 mm Milling cutter arbor cone: HSK-B160 Swivel range milling head: ° Distance between cutter and workpiece: 615 / 1600 mm Hnedpfx Asxmfbkjacsu Axial: 4000 mm / min Radial: 00 mm / min Tangential: 00 mm / min Feed rate Z - axis (mm/min):: 6000 (mm/min) Further information: - Fully automatic centering device - Oil mist separation - Gear tooth measurement - “Profile grinding” software package - Error diagnosis - IFK2 internal milling head - Milling mandrel with spacer discs - Chip conveyor - Oil mist extraction - Technical documentation

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Hnedou Thpnopfx Aacou Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: new, Experience unparalleled precision and performance with the surface grinding machines from PERFECT. Now even supported by BAFA! Our machines offer grinding lengths from 500mm to 4000mm and grinding widths from 150-1000mm available, also available as controlled variants. Partially available from stock! Discover our extensive range of special accessories that make your surface grinding machine even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results for you. Trust in our many years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Our selection of conventional or controlled machines (further models available on request): Model FSM 2550 FSM 3060 FSM 4080 Grinding Length 500 mm 600 mm 800 mm Grinding Width 250 mm 300 mm 400 mm Distance Table Surface/Spindle Center 500 (Option 600) mm 500 (Option 600) mm 550 (Option 650) mm Table Size 250×500 mm 300×600 mm 400×800 mm Max. Table Load 250 kg 300 kg 400 kg Model FS-NC-50AHR FS-NC-60AHR FS-NC-70AHR Grinding Length 1020/1520/2020 mm Grinding Width 500 mm 600 mm 700 mm Distance Spindle Center to Table 600 (Option 800, 1000) mm Table Clamping Surface 500×1000/500×1500/500×2000 mm 600×1000/600×1500/600×2000 mm 700×1000/700×1500/700×2000 mm Table Load 800/1000/1000 kg 1200/1400/1400 kg 1500/1700/1700 kg ACCESSORIES: Grinding wheel, Grinding wheel flange, Grinding wheel dresser, Grinding wheel puller, Assembly elements, Machine tool, Balancing mandrel, Machine light, Hydraulic unit with cooling fan, Technical documentation in German, CE design CURRENT STOCK MACHINES (see pictures): New machines with grinding area 250x500mm, 300x600mm, 400x800mm, 700 x 1520mm Overhauled machines with grinding area 250x500mm, 300x600mm, 400x800mm Furthermore, we have access to various used machines with large grinding areas. Contact us! For more technical data, description, and accessories, please refer to the PDF file below. Hjdpfxedzk T Rs Aacjnu By the way, in addition to inexpensive new machines and tested used ones, you can expect even more from us: • Consultation and solutions at your location • Organization of the transport of your machine to your factory • Installation, assembly, commissioning, and ready-to-use handover, and more.

Year of construction: 2015, condition: as good as new (ex-display), Slip-on mandrel Make Goblet unused in wooden box for shell end mills No. 1115 driving rings : size 27 / 32 / 40 mm Weight 10 kg Age estimated Hnsdpfsfgwlzsx Aacsu

Condition: new, Capacity, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radius difference ----- 50/230 Bending speed/repeatability ----- 230º/s. ±0.05 Length of mandrel ----- 1 000-∞ Weight ----- 5000kg Machine dimensions ----- 3.0 x 1.6 x 1.5 Tube rotation ----- 0-360°/sec Length feeding ----- 0-1800 mm/sec Hnedpfx Aaoga T E Aeceu Degree of tolerance ----- 0,05°/mm Standard components conform to VDMA, ISO and DIN standards OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: good (used), Year of construction: 2002, controller manufacturer: SIEMENS, pipe diameter (max.): 120 mm, overall weight: 16,500 kg, total height: 2,300 mm, space requirement length: 8,000 mm, space requirement width: 2,600 mm, CONTROLS .. CNC controls SIEMENS TECHNICAL SPECIFICATION .. Max. diameter of tube: 120 mm .. Max. bending radius: 180 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 8000 mm .. space requirements -front/back-: 2600 mm Hodpfx Ajxm Ru Asacenu .. total height: 2300 mm .. total weight approx.: 16500 kg machine in a very good condition Machine in very good condition Special features: - Free-form bending option - Laser scanner for securing the bending area - Foot pedal for safe start - Bending simulation Automation: - CNC control BEND MOTION CONTROL - Automatic mandrel lubrication as MMS Retrofit 2018: - Control system retrofit - Cables replaced - Bending head overhauled - Guides replaced - complete equipment (see photos) Operating hours: 9,000 hours

Condition: used, Year of construction: 2009, Suitable for automatic grinding of carbide circular saw blades on the face and back in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be grinded automatically and in a single pass. Accessories: Hnedpsxfg Dwjfx Aaceu Total enclosure, ND 230 loader (3-pallet loader), 4 loading carriages including 30 mm mandrels, measuring probe, grinding device with oil cooling, additional coolant cleaning system, automatic fire extinguishing system, automatic central lubrication system, extraction for oil and emulsion mist, alphanumeric keyboard, machine light, DES 300 data entry station for recording technical data of the circular saw blades including keyboard, monitor, and mouse, oil drip tray with floor grid, 2 grinding wheel holders, 1 saw blade magnet holder. Circular saw blade diameter without robot: 80-840 mm Circular saw blade diameter with robot: 100 - 630 mm Circular saw bore diameter: with robot from 10 -180 mm Sheet thickness without robot: up to 14 mm Sheet thickness with robot: up to 5 mm Tooth pitch: 6 - 120 mm rake angle: -35° to +40° Bevel grinding on the tooth back: up to 45 ° clearance angle: 5° - 45° Bevel grinding on the negative tooth face: up to 30° Working speed for breast and back grinding: up to 12 teeth/min., Machine dimensions L x W x H =: 2316 x 1860 x 2058 mm weight machine: 3000 kg Loader weight: 1400 kg Grinding path and grinding speed per machining surface on the tooth: infinitely adjustable Dimensions loader L x W x H =: 3840 x 2020 x 2000 mm Connected load approx.: 4.4 kW (400 V / 50 Hz) colour: telegrey RAL 7045/7047

Condition: used, Year of construction: 2001, machine/vehicle number: 07011175, Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Hnodpfeuqdgasx Aacou Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder -Type: SK50 x 22 x 400 -Shaft: Ø 22 mm -Dimensions: 600/90/H93 mm Hnjdpfjvmxvxjx Aacou -Weight: 5.9 kg

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Empty weight: 300 kg Part suitable for: machines Hnedpfjxh Adxex Aaceu Type number: 6I6475, 4I7488, 297-9133, 4I7337 CAT313 Track adjuster and recoil Caterpillar OEM : 6I6475, 4I7488, 297-9133, 4I7337, 297-9142 Article nr.: C042013031N-veiling Track adjuster and recoil Caterpillar

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05 Tube length ----- 1 350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0-850°/sec Length feeding ----- Standard 0-2 400 mm/sec Booster ----- 0-1 200 mm/sec Degree of tolerance ----- 0,05°/mm Bending head rotation ----- 0,75 sec Standard components conform to VDMA, ISO and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension Hsdpfxjga T Exs Aaconu

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hsdpfeuccw Hsx Aacjnu Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max. tube Ø: 42mm Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: new, Year of construction: 2021, Bernardo Gear-driven pillar drilling machine GB 32 STi Technical specifications drilling capacity in steel 32 mm Drilling capacity in cast iron 35 mm Thread cutting max. M20 drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / number of steps 125 - 3030 rpm / 12 Hsdpfjg Hwmxsx Aaconu feed range 0,1 / 0,2 / 0,3 mm/rev throat 325 mm distance spindle / table max. 690 mm distance spindle / base plate 1250 mm spindle sleeve stroke 160 mm Column diameter 120 mm table size / T-slot size 500 x 420 mm / 14 mm Working surface base plate 365 x 370 mm Motor output power S1 100% 1.0 / 1.2 kW Motor input power S6 40% 1.5 / 1.8 kW Machine dimensions (W x D x H) 570 x 900 x 2200 Weight approx. 415 kg Scope of delivery - Gear rim drill chuck 1 - 13 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2 - Coolant device - Electromagnetic spindle feed - Tapping device - Automatic tool ejector - LED machine light - Digital speed display - Height adjustable protective cover - Initial filling with Shell Tellus 46

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Hjdpfexcuicex Aacsnu Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder Hsdpfjvcxhgox Aacsnu -Type: 50 x 50 x 630 mm -Dimensions: Ø 100 x 850 m -Weight: 23.5 kg

Condition: used, Year of construction: 2017, Suitable for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces can be picked up on the fly or between the centers (option). Accesories: Total enclosure HR workpiece magazine (round magazine) for up to 16 workpieces up to 130 mm in diameter, 20 kg, or up to 8 workpieces up to 230 mm in diameter, 20 kg. Magazine disk for 16/8 HSK63-A,E workpieces with a diameter of 130/230 mm, up to 20 kg. Adapter to the A axis for HSK63-A,E. Automatic fire extinguishing system. N181 extraction system with 500 m³/h air flow. Automatic cover flap. Automatic central lubrication. Measuring probe. Cooling unit for dielectric fluid including cooling unit. HSK-A63 test mandrel. Verfahrweg Z1-Achse: 195 mm Verfahrweg A1-Achse: 360° Workpiece diameter: up to 320 mm workpiece length: up to 500 mm workpiece weight: up to 25 kg mandrel: SK 50 diameter wire: 0.1 - 0.25mm Travel X1 axis: 535 mm Travel Y1 axis: 300mm Z1 axis travel: 195 mm A1 axis travel: 360 ° C1 axis travel: 180 ° Connected load approx.: 5kVA (400V / 50HZ) mass: 4100 kg Dimensions W x D x H approx.: 2549 x 3163 x 2709 mm Hnedpjw Nilmefx Aacou colour: RAL 7047 telegrey 4, RAL 7045 telegrey 1. Travel C1 axis: 180 °

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Hnsdpfx Asw Rhlhjacou Dowel insertion device for simultaneous gluing and dowel driving Dowel feeding via maintenance-free vibratory feeders Fully automatic, maintenance-free electronic control with selector switch for FLUSHING/GLUING/GLUING & DRIVING Self-contained glue system 1 stainless steel container (5 l) for glue and 1 stainless steel container (5 l) for water Lightweight, handy, and recoil-free gun for 8 mm dowels Availability: by arrangement Location: Flörsheim

Condition: good (used), Manufacturer: Tracto Technik Type: TUBOMAT Year of construction: 1996 Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device Machine mobile and flexible to use Specifications Metric US Standard Max. Product Ø 42 mm Min. product Ø 6 mm Max. Wall thickness Hedpot Dk Ukefx Aaconu 3 mm Max. Bending radius 5 mm Min. bending radius 180 mm Max. Bending length 2000 mm Deburring device Yes Sage device Yes Flanging device Yes Dimensions (estimate) Length 3500 mm width 1000 mm height 1200 mm weight 1000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1991, tube diameter 6 - 18 mm Hodpfxov T Nq Ho Aaconu 180 ° 1500 mm weight of the machine ca. 0,55 t dimensions of the machine ca. 1,6 x 0,8 x 1,2 m

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Hnodpfoxcuiisx Aacsu Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Year of construction: 1989, condition: used, functionality: limited functionality, machine/vehicle number: 2 2069 029, The machine is in daily use, but the electronics are somewhat unstable. Sometimes has to be started several times to remove the error message. Sometimes it does not stop but only feeds out long springs. Mechanically it is good. Makes springs from 0.8 to 5 mm. It comes with all the rollers, pins and mandrels. Hjdpfx Aaexb Rp Aocsnu

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Hnedpeq A Tw Rsfx Aaceu Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: like new (used), Year of construction: 2019, tube diameter 28 mm wall strength 2 mm bending radius min. 90 mm control 3D TubeSoft Slim total power requirement 3,5 kW Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted Hnsdpfsxcuhrjx Aacou

Condition: like new (used), Year of construction: 2019, tube diameter 28 mm wall strength 2 mm bending radius min. 90 mm control 3D TubeSoft Slim total power requirement 3,5 kW Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Hnsdpfexcuhlex Aaceu max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted