Used Thread Coiler for sale (2,498)

Condition: excellent (used), Overall dimensions: 3700 x 1070 x 1700 mm Disc coil inner diameter: 460 - 600 mm Maximum sheet roll width: 1000 mm Direction of rotation: Bidirectional Hydraulic operation: - rotation Dodpfx Afepvia Ejnokh - transverse movement on the chassis - shaft grip Pneumatic operation: - brake

Condition: good (used), Year of construction: 1998, functionality: fully functional, FOR SALE Dkjdpfx Afsxv Dcxonoh Thread rolling machines Escofier H20Z

Condition: excellent (used), 1 lot thread plug gauges ca.66 pieces in one drawer Dkedpfx Afji Dr Akensh Dimensions, see pictures

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER TYPE:3S-G year of construction ca.2000 Without cutting head with pipe cutter and end burr device. Runs with V230 current. In top condition, like new. Dkedomn Thhjpfx Afnsh

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Dsdpfx Aevk D Rpefnjkh Manufacturer SONE Type: 2000 . 230V .

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Dkodpfxswgizde Afneh Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Condition: excellent (used), thread dia. 36 mm Djdsyhq S Eepfx Afnskh

Condition: excellent (used), Thread cutting steel (108141) Make Comet Dkodpfx Aoigqr Refnsh Type FG 2 for external thread With threaded steel 60 degrees and threaded steel 55 degrees in wooden case

Condition: excellent (used), Thread plug gauges different sizes M 80 x6 6 H. 476,00 Euro M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro M 62 6 H Good& scrap 320,00 Euro Djdeipxynopfx Afnskh M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro M 48 x 2 6 H 240,00 Euro are also sold individually

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Dkodpsxukrqofx Afnsh Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Dkjdpfx Afsxf Uwxonsh Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm Djdex I Agpopfx Afnjkh -Weight: 46.6 kg

Condition: used, Year of construction: 2018, functionality: fully functional, Brand/Model: REMS Unimat 75 Year of manufacture: 2018 Condition: Very good Location: Spain Delivery/loading possible. Thread diameter: 6–72 mm / 1/4–2 mm Thread length: 200 mm / unlimited Power consumption: 2.3 kW Machine weight: approx. 550 kg Space requirements: approx. 1200 x 800 x 1300 mm Dkedpfx Afjyh E Tzoneh

Condition: good (used), Year of construction: 2016, Internal item no.: 26001 Taxed under the differential taxation scheme according to §25a German VAT Act. You will receive a proper invoice, but VAT is not separately shown. You are welcome to inspect the machine under power in a heated warehouse area of over 500 m². Dedsygvtxspfx Afnokh Column Drilling Machine Geldmacher DP25 Year of manufacture: 2016 + Thread cutting function + Infinitely variable speed (150 - 3000 rpm) + Coolant pump + Emergency stop / safety cover with switch (UVV compliant) Dimensions (approx.): 90 x 65 x 185 cm Weight: approx. 350 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Djdjtqlq Ejpfx Afnskh Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: excellent (used), thread dia. 5 - 200 mm grinding length 500 mm Dodpfx Afewvl H Uonekh thread pitch 0,25 - 6 mm clamping length max. 850 mm grinding wheel diameter 350 mm centre height 105 mm thread M2 - M149 thread - inch 3/32 - 4 inch. inclination li/re +/-10 ° total power requirement 6 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,5 x 1,7 x 1,5 m

Condition: excellent (used), Tap for pipe thread Make May Type : R 3 3/4 inch Dkodofhdwqspfx Afneh Total length 185 mm

Condition: used, Taps for pipe thread Before and finished Schneider R 2 3/4 inch Dkodpfxodk Rdvo Afnsh

Condition: used, Diameter 48 mm Bilz thread adapter Diameter 63 mm Variolock connection Length 160 mm Total length 180 mm Djdpfx Aob Tyqpefnskh 2 pieces available

Condition: as good as new (ex-display), 1 3/4 inch - 5 1 3/8 inch - 5 1 1/8 inch - 7 7/8 - 9 5/8 - 11 1/2 in. - 13 38 inch - 16 5/16 inch - 18 Dkjdpfx Afodwbk Ronsh 1/4 inch - 20 Individual approval is possible

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm Dsdpfx Ajyb S Risfnekh clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: excellent (used), thread dia. 10 - 150 mm grinding length 900 mm Dksdpeyb S N Sefx Afnjh thread pitch max. 3 mm workpiece diameter max. 260 / 340 mm threading length max. 50 mm centre distance 1200 mm centre height 1100 mm grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads Dsdpsdzp S Nsfx Afnekh - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: good (used), Year of construction: 1998, Offer 20137 Technical data: - 3 stationary, positionable thread tapping machines - Tapping capacity for each up to approx. M 12 - Tapping depth approx. 75 mm - Steplessly adjustable drilling feed - Spindle speeds up to 490 rpm - Pneumatic connection 6 bar - Drive 400 V - Required space approx. W 2000 x H 1600 x D 900 mm Dkodpjygh Iuofx Afnjh - Weight approx. 150 kg

Condition: not inspected (used), functionality: unexamined, Various thread grinding machines are being offered as a package. The machines have been disconnected from the power supply, i.e., they cannot be demonstrated under power. Removal and loading are the responsibility of the buyer. Under the section "Documents" (PDF file) you will find the prices for which the machines are being sold ex location. There is no forklift available for loading the machines, but one can be arranged. In the second file, you will find additional machines available for sale. Dkjdpfx Afoyc N Dponoh Ma-108 Thread Grinding Machine GUS-A LINDNER Ma-109 Thread Grinding Machine GUS-B LINDNER Ma-111 Thread Grinding Machine LINDNER