Used Reel Mower for sale (898)

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Hsdpfszu Avzsx Ac Tjt Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. Hjdpfx Aoya H S Sec Tet The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Jaws: 250mm x 150mm Hjdpfx Acowd Sh Ue Tet Up to 30 programmable products Price € 5,950

Condition: good (used), functionality: fully functional, Year of construction: 2010, swing-arm, 3.6m Hodpfxoztnkne Ac Tjt

Condition: excellent (used), Year of construction: 2019, overall weight: 500 kg, total length: 2,000 mm, total width: 1,600 mm, total height: 2,200 mm, Load capacity: 2,200 kg Table – Ø: 1,525 mm Band width: max. 150 mm Band thickness: max. 1.27 mm Stack height: max. 760 mm Speed: max. 10 RPM, continuously adjustable Design: o Frame in a robust welded construction o Loop control via a joystick with a roller o Speed can be pre-selected via a display o Right/left rotation Hjdjzvqzzopfx Ac Tet o Fixture for inner diameter

Condition: good (used), Year of construction: 1992, operating hours: 14,148 h, Linde H16T Triplo 470 Freelift / 3rd function on the mast / VW 1992 / 14,050 hours, LPG powered. Dutch registration. A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex works Nuland. Hodpfx Acozxq Slo Tot Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for an inspection and/or test drive. Please call beforehand as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, functionality: fully functional, Year of construction: 2012, Well-maintained and immediately operational MasterCut 92-15.5 ride-on lawnmower with a grass collection basket. This lawn tractor is ideal for private properties, larger gardens, and regular lawn care. Equipped with a reliable Briggs & Stratton PowerBuilt 15.5 HP engine, hydrostatic drive, and a cutting width of approximately 92 cm, the ride-on mower enables comfortable and efficient work. The grass collection basket is included and ensures clean collection of the clippings. The machine is in good used condition and is ready for immediate use. Technical specifications: Manufacturer: MasterCut Model: 92-15.5 Engine: Briggs & Stratton PowerBuilt Engine power: 15.5 HP Fuel: Gasoline Drive: Hydrostatic Cutting width: approx. 92 cm Grass collection basket: included Cutting height adjustment: stepless Tires: Lawn tread Condition: used, functional Equipment: Hydrostatic drive Grass collection basket included Robust cutting deck Comfort seat Easy operation Ideal for large lawns Hedpfx Acezc Iv Rs Tet Condition: Used - Year of manufacture 2012 Shows age-related and usage wear Technically functional Immediately operational New drive belts for drive and cutting deck Scope of delivery: MasterCut 92-15.5 ride-on lawnmower Grass collection basket

Condition: used, Catalpa arm-mounted flail mower • Working width: 1500 mm • Self-contained hydraulic system • Ready for immediate use Condition: Used Hjdpfszumi Eox Ac Tjt

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), overall weight: 1,200 kg, fuel type: diesel, Year of construction: 2013, operating hours: 1,127 h, MC Connel Robocut / Energreen Robogreen Hjdpfx Aew A Nn Asc Tot Radio-controlled mowing crawler / large-area mower / embankment mower Technical information according to manufacturer: - 40 HP 3-cylinder Isuzu diesel engine - 2-stage hydrostatic drive (0–4 and 0–7 km/h) - Emergency stop - Slope capability up to 55 degrees - Hydraulic output for mowing rotor (L/min): 50 - Working pressure (bar): 200–350 - Autec model control system - Machine weight incl. attachment (kg): 1040 Attachment: HEAD-130 - Flail mower rotor with 1.30 m working width including floating position, fitted with Y-blades - Mowing rotor weight (kg): 160 - Flail rotor speed (rpm): 3000 This Energreen Robocut was manufactured in 2013 and, according to the meter, has 1,127 operating hours. It is in very good overall condition, showing the typical signs of use and wear for this class of machine. Recently serviced with major maintenance and extensive overhaul. Sale as a used machine, excluding return, warranty, and guarantee. Net price: €32,500 // Gross price: €38,675 - Viewing and test drive possible by arrangement - Nationwide shipping can be organized; costs depend on distance - Financing and leasing can be arranged individually

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Load capacity: 150 kg Band width: max. 150 mm Coil diameter: max. 800 mm Spreading range: 230 ... 545 mm Design: • Motorized drive • Loop control via contact switch on the reel base • Limit stop disc at the rear Hsdpjzi Exuefx Ac Tjt • Limit stop ring at the front • Selector switch for left/right rotation • Selector switch for manual/automatic operation

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6415 1 x Comcount Packaging Systems bowl feeder and 1 x GIC Gainsborough VFFS bagger with 1 x outfeed conveyor. Model of Comcount bowl feeder - BFWT. Manufacturer - Comcount Ltd. Hedpfx Asy Hlw Iec Tot Date of manufacture – 2019. Weighing range - 150g-500g. GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd Date of manufacture – 2008. Sealing bars - 290mm horizontal & 320mm vertical. Reel width - 620mm. Current film - 280mm. Forming tube - 80mm diameter. Outfeed conveyor - IC350. Belt width - 295mm. Outfeed height - 910mm high. Overall footprint - 4.3m long x 3.45m wide x 3.1m high. Condition – Very good. Only been used 5-6 times in 2.5 years.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Characteristics: * Storage capacity: ~ 10300 T * Inlet: max. 75 reels/hr * Outlet: max: 25 reels/hr Hjdpfxevl Enxo Ac Tet * Channels: 264 * Storage length: ~ 5160 m * Height: ~ 30 m * 2 receiving robots * 2 reel stacker cranes Description Automated warehouse for storage of (paper) reels with the following characteristics: * Diameter: 500 – 1500 mm * Width: 600 – 2250 mm * Weight: max. 5000 kg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: E-018455, Two units are for sale. One in blue and one in green. The price quoted is for one unit. Hjdpfszqvafjx Ac Tot

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Hsdpey Hlvwjfx Ac Tst Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: used, color: orange, Empty weight: 455 kg Working width: 100 cm Required tractor power: 65 hp Hodpfx Acjzln S Aj Tjt

Condition: used, Hydraulically driven flail mower • Working width: 1400 mm • Equipped with hammer-type flails Hsdpfx Aezipkzsc Tot Condition: Used

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. Hjdpfx Acey Hi D Se Tst The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2013, operating hours: 17,150 h, Linde H30D-02 Triplo 480 Freelift / Sideshift / 4th Fork Spreader, VW Diesel, 2013, 17,150 hours, DIESEL. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Hedpszxq Srofx Ac Tet

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Hjdpoy Hlkbsfx Ac Tjt Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: used, Year of construction: 2022, empty load weight: 52 kg, fuel type: gasoline, Several well-functioning two-wheel tractors with mower bar for sale: Briggs & Stratton engine 4,5HP Mower bar of 87 cm. Self-propelled, forward and reverse. Hjdpjzqhpxefx Ac Tjt In very good condition! Price: € 900,- ex. VAT Several in stock!

Condition: good (used), Hydraulic decoiler, movable on rollers Load capacity 20,000 kg (with decoiler support 30,000 kg) Hydraulic expansion: max 550 mm Hedpfx Acow Up N Ns Tet min 480 mm Decoiler drum: 1700 mm Drive: Gearbox with electric motor and electromagnetic clutch, hydraulically braked with proportional valve Pressing device with drive roller was available. Drawings for a new one suitable for the decoiler, as well as decoiler support for a load capacity of 30,000 kg, are available.

Condition: new, working width: 125,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. floating linkage / NEW equipment / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - Suitable for excavators from 5 to 15 tons - Universal interface for mounting various adaptor plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low profile design - Indirect V-belt drive with 4 belts - Drive prepared for hydraulic motor depending on the carrier’s oil flow - 4D ROLLER: reinforced support roller, 152 mm Ø, with double-taper roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement, 29-58 cm³, and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic oil flow in l/min (min-max): 55 – 150 OPT 099 Floating linkage (parallelogram guidance) OPT 555 Pendulum adaptor Hodpfx Acoyix Has Tjt Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adaptor plate incl. bolts and installation = €750.00 net Multiple other adaptor plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of different Seppi M. products in our warehouse, all ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing offers available upon request. We are an official distribution and service partner for Westtech. We are an official distribution and service partner for OilQuick. We are an official distribution and service partner for Holp. We are an official distribution and service partner for Magni telehandlers. We are an official distribution and service partner for DMS. We are an official distribution and service partner for Gierking GMT. We are an official distribution and service partner for Weber MT. We are an official distribution and service partner for Seppi M. We are an official distribution and service partner for JCB construction machinery. We are an official distribution and service partner for Mercedes-Benz. We are an official distribution and service partner for Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Intended use: agriculture Please contact Marius Herden for more information.

Condition: excellent (used), functionality: fully functional, power: 17.65 kW (24.00 HP), fuel type: gasoline, fuel: super 95, gearing type: other, Year of construction: 2023, AGRIA 9600 - 112 !!! 2nd Generation New Model !!! Remote-controlled mulch mower with 112 cm rotary mulching deck This AGRIA 9600-112 mower is a 2023 model with only 304 operating hours according to the meter and is in very good overall condition with normal signs of use and wear. Customer service has just been carried out. The current RRP is €44,900. Net price: €26,806 // Gross price: €31,900 - Inspection / test drive welcome! - Nationwide shipping for €400 via freight forwarding! Hedpfx Asxa Ar Toc Tet - Financing / leasing can be individually requested.

Condition: excellent (used), functionality: fully functional, Manufacturer Julius, type AH 41 Inner coil diameter from 250 to 300 mm Max. width 295 mm With brake Good condition, ready for immediate use Hedpfeziwxtex Ac Tet

Condition: new, Year of construction: 2021, Stihl 53 cm Gasoline Lawn Mower RM 655.1 VS The STIHL RM 655 VS gasoline lawn mower is not only a true powerhouse due to its durable aluminum housing. With its Vario drive and a cutting width of 53 cm, it is ideally suited for maintaining large areas. The central, seven-stage cutting height adjustment allows you to choose a grass height from 25 to 85 mm. To make your work easier from the start, its engine is equipped with the ReadyStart function, which ensures reliable starting. During mowing, the speed of the powerful engine remains constant, even when changing speed, and its mono-comfort handle ensures easy handling. The blade-brake clutch of the RM 655 VS is also noteworthy, as it disengages the cutting unit when the engine is running, so short mowing breaks do not require restarting the mower. The foldable grass catcher with a volume of 70 liters and a fill level indicator can be easily emptied. With this gasoline lawn mower, you are choosing a reliable companion for your gardening work. Hsdpfetvf R Ejx Ac Tjt Technical data: • Aluminum housing with wear strips • Guaranteed sound power level LWAd [dB(A)]: 98 dB(A) • Weight: 50 kg • Grass catcher volume: 70 l • Displacement: 173 cm³ • Foldable grass catcher with fill level indicator • Comfort handle • Easy-rolling wheels • Blade-brake clutch (BBC) • Engine with easy-start system (ReadyStart) • Engine type: HD775 OHV SC series • Mulching function & multi-blade • Rated speed of working tool: 2800 rpm • Rated power: 2.6 kW / 3.5 hp • Lawn area: up to 2500 m² • Cutting width: 53 cm • Cutting height: 20-85 mm • Super-Soft handle • Uncertainty KpA [dB(A)]: 2 dB(A) • Vario wheel drive • Vibration guide handle ahw: 3.8 m/s² • Vibration uncertainty K: 1.9 m/s² • Central cutting height adjustment The lawn mower is new and unused. It was only on display in our showroom and has minor storage marks. The lawn mower cannot be shipped by a parcel service as it is too large and too heavy. Shipping by freight forwarder is possible at your expense. No shipping outside EU. You will receive an invoice with VAT shown. Payment exclusively by bank transfer - NO PAYPAL!