Used Mandrel Tube Bending Machine for sale (84,874)

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood Prsdpfx Aevtgn Neg Djd in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 0100-0149-2024, overall weight: 700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,500 mm, TECHNICAL DATA & EQUIPMENT: Predexm Symjpfx Ag Ded Suitable for flat material Working length: approx. 2500 mm PICK-UP NOTES: Collection must take place strictly between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: used, Mandrel Tube Bending Machine 42 Siegfried Volz Machine Tools Prodpfxewnrt Sj Ag Djd Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm Predoxz Ahwopfx Ag Djd - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-90 A Technical Specifications Max. Tube Diameter (mild steel): 90 mm Max. Tube Wall Thickness (mm): 4 Max. Bending Angle (°): 190 Tube Bending Rate (d/min): 3-6 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Podjxvzuropfx Ag Derd Tube Loading Length (mm): 3000 Bending Motor Power (kW): 15 Hydraulic Motor Power (kW): 5.5 Machine Width (mm): 1400 Machine Length (mm): 4500 Machine Height (mm): 1600 Machine Weight (kg): 3000 Features • On our standard NC machines, the distance and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend more quickly and accurately by monitoring the progress and rotational positions of the bends carried out with our machines equipped with the NC Car System.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Podpfx Agjttah Rs Dord Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 1988, gebraucht Predpfx Agsxx A Ekj Djd 1988 090151 prompt, Zwischenverkauf v Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5,5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bending height:1200 mm Machine data Length:4000 mm Width:2600 mm Pedpfxer H Havs Ag Djrd Height:1400 mm Weight:9000 kg

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm Pjdpfou Ibvhjx Ag Djrd control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Predpexz Ag Hofx Ag Dsd Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Max. bending radius (mm) 250 Min. bending radius (mm) 45 Tube length (mm) 4000 Predpfx Ajxvzt Usg Dsd Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Machine length (mm) 6200 Machine height (mm) 1500 Machine weight (kg) 2000 Features • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm Pedpod E A I Iefx Ag Dord - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7385, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Transfluid, controller model: IPU 20, pipe diameter (max.): 648 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 180 °, bending radius (max.): 125 mm, bending radius (min.): 50 mm, working width: 6,000 mm, mandrel length: 5,500 mm, number of axes: 3, working height: 1,300 mm, table length: 7,000 mm, table width: 900 mm, table height: 1,300 mm, overall weight: 1,000 kg, total length: 7,000 mm, total width: 900 mm, total height: 1,300 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 1,320 l, operating pressure: 200 bar, Equipment: documentation/manual, emergency stop, Bending software requires a new update. Bending mandrels are available, bending tools are not included. Predpfx Aexcxupog Dod

Condition: used, Year of construction: 2012, tube diameter 51 mm wall strength 3 mm semi-automatic operated UZMA bending radius max. 225 mm bending angle max. 190 ° bending speed 35 ° / sec. mandrel length 3.100 mm engine output 5,5 kW voltage 380 V total power requirement 11,0 kW weight of the machine ca. 1,36 t dimensions of the machine ca. 4,20 x 1,60 x 1,20 m - Serial No.: 0144 - semi-automatic mandrel bending machine - bending angle is program controlled - length + twisting angle manually adjustable - digital display for twisting angle, length and bending angle - the following bending sets are included: 1.) R75 mm / Ø 20 mm 2.) R60 mm / Ø 25 mm 3.) R75 mm / Ø 30 mm 4.) R75 mm / Ø 40 mm 5.) R170 mm / Ø 50 mm 6.) R35 / flat Material 40 x 10 mm Prodpfx Aspungleg Ded

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm Prodpfx Aeu Ibvusg Dsd bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. Psdpong Ax Sjfx Ag Derd - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Cesurbend CNC Tube and Pipe Bending Machine PBNC-51 A Technical Specifications Max. Tube Diameter (Mild Steel): 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Speed (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 4000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1300 Machine Length (mm): 5750 Machine Height (mm): 1500 Machine Weight (kg): 2000 Features Prodpoxvzr Rofx Ag Dod • On our standard NC machines, distance and rotation after bending are handled via operator assistance and parallelism devices. • Using our machines equipped with the NC Car System, you can monitor bend progress and rotational positions, enabling faster and error-free bending.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 260900101013, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 25 mm, bending radius (max.): 170 mm, No minimum price – guaranteed sale to the highest bidder! Application: Processing of formable tubes, rectangular tubes, round rods, and square tubes. Prjdpfow T Sqgsx Ag Dod TECHNICAL DETAILS Tube diameter: 42 mm Wall thickness: 25 mm Max. round steel diameter: 20 mm Square tube: 25 x 25 mm Max. internal bending radius: 20 mm Max. external bending radius: 170 mm Bending direction: left Tube feed length: 3,000 mm Control: RC 7000 software Programming: manual Operation: via control panel MACHINE DETAILS Machine weight: 2.8 t Control cabinet dimensions: 800 x 700 x 2,000 mm Machine dimensions approx. (L x W x H): 5.1 x 0.7 x 2.0 m EQUIPMENT - Various bending tools for 25 mm tube - 12 assorted collets - Various auxiliary and clamping devices

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBNC-65 Technical Specifications Max. Tube Diameter (mild steel): 63 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Min. Bending Radius (mm): 45 Tube Length (mm): 3500 Bending Tolerance (mm): ± 0.25 mm Bending Motor Power (kW): 7.5 Hydraulic Motor Power (kW): 4 Oil Tank Capacity (L): 50 Machine Width (mm): 1450 Machine Length (mm): 4250 Machine Height (mm): 1200 Machine Weight (kg): 1600 Features • 4-way adjustable gauge • Chain bending system • Gear motor • Touchscreen control panel • Foot pedal operation • Hydraulic mandrel movement • Hydraulic damping function • Hydraulic compression function Prjdpfx Ajxt Rdweg Djd • Hydraulic pusher • Four cylinders • 7" touch color display • 15 sequential twist positions • 100 program memory capacity • Omron PLC control

Condition: new, Cesurbend Mandrel Tube Bending Machine / Pipe Bending Machine PBNC-51 Technical Specifications Max. Tube Diameter: 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7-10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Predpfxext Rc Ts Ag Ded Tube Length (mm): 3000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1400 Machine Length (mm): 4215 Machine Height (mm): 1450 Machine Weight (kg): 1600 Features • In this process, the jaw clamps the tube after it is inserted into the machine. The tube is bent over the die to half its diameter. When using a mandrel and wiper, better results are achieved for bends requiring higher quality, with thinner wall thickness and smaller radii. • This is a three-piston machine with a hydraulic spool located behind the hydraulic boom.

Condition: new, Cesurbend Tube Bending Machine / Pipe Bending Machine PBNC-38 Prodpfx Aoxt Rctog Dsd Technical Specifications Max. tube diameter (mm): 38 Max. wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rpm): 8-10 Max. bending radius (mm): 250 Tube length (mm): 2500 Bending motor power (kW): 3 Hydraulic motor power (kW): 1.5 Machine width (mm): 1400 Machine length (mm): 3250 Machine height (mm): 1200 Machine weight (kg): 700 Features • 4-position adjustable gauge • Option to use mandrel and spoon on NC machines • The carriage system is equipped with a linear guide rail and carriage • Connection equipment is standard. Mandrel and spoon are optional. • 7" color touchscreen display • 5 sequential twisting options • 100 program memory capacity • Omron PLC control

Condition: new, Cesurbend Mandrel Tube Bending Machine PBH-32 E Technical Specifications Max. tube diameter (mild steel): 32 mm Max. tube wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rpm): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Hydraulic motor power (kW): 1.5 Tube length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 400 Features • 4-way adjustable measuring device • 7" touchscreen colour display • 5 sequential twisting options • 100 program memory capacity • Omron PLC control Prodoxt Rcgepfx Ag Dsd

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBH-32 Technical specifications Max. tube diameter: 32 mm Max. wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (d/min): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Hydraulic motor power (kW): 1.5 Tube length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 400 Features • Hydraulic clamping Prsdpfx Ajxt Rb Neg Dsd • Brake motor / precision rotation • Manual size adjustment

Condition: new, Cesurbend Mandrel Tube Bending Machine / Pipe Bender PBM-32 E Technical Specifications Max. tube diameter (mm): 32 Max. tube wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rev/min): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Tube length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 300 Features • 4-way adjustable measuring device • 7" color touch display • 5 sequential rotation options • 100 program memory capacity Psdpfxext Rbpo Ag Derd • Omron PLC control

Condition: new, Cesurbend Mandrel Bending Machine / Pipe Bending Machine PBM-32 Technical Specifications Max. pipe diameter: 32 mm Max. wall thickness (mm): 2 Max. bending angle (°): 190 Pipe bending speed (r/min): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Pipe length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 300 Features • This is a semi-automatic machine. If you need to bend only a few pipes per day (25-50 pieces per day), this machine is the right choice. • It is the simplest pipe bending machine with brake motor. • Brake motor / precise bending Prsdjxt Ra Ejpfx Ag Djd • Manual dimension setting • Former rack