Used Recoiler Mandrel for sale (462)

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed Dkedpsib D H Rofx Ab Asw - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: good (used), amount 1 Palette Set of milling and lathe accessories, primarily Deckel-compatible tool holders, arbors, clamping accessories, and gears. -> SK/ISO-style tool holders — various lengths, some with clamping nuts, others with a through-hole for drive pins. -> Special Deckel tool holders — one holder is even labeled “Model Deckel.” -> Cylindrical collet holders — several sizes, neatly sorted in a red holder. -> Reducing sleeves — for adapting different tool shanks. -> Threaded adapters — short, thick adapter pieces with internal threads. -> Toothed drive shafts — several pieces, some with hex heads, some with longitudinal teeth. -> Arbors / milling mandrels — longer shafts with a pin or collar, typically used for milling cutters or disc tools. -> Short centering or guide pins — small cylindrical parts with threads or a press fit. Dksdpfjzhcgaox Ab Aew -> Red tool holder block — for six collet holders. -> Green-red machine module — presumably part of a top milling machine (e.g., angle head or accessory holder). Complete package price

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides Dodpjzi Strofx Ab Askw - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: good (used), Year of construction: 1974, Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press Dksdpfx Ajypvtkeb Asw -Manufacturer: NEHER, manual spindle press type SPPG-40/100 -Pressure: max. 40,000 kg -Stroke: 600 mm -Intermediate dimension: 715 mm -Spindle mount: Ø 40 mm -Table size: 1100 x 600 mm, groove width mm -Table bore: Ø 120 mm -Dimensions: 1800/1800/H2400 mm -Weight: 1940 kg

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 166 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2550 H Vibratory Plate – NEW | 25 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B20 with 3.1 kW Item No.: 5000610036 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 2550 H Condition: NEW Operating Weight: 166 kg Frequency: 90 Hz Centrifugal Force: 25 kN Dksdpfjzh D R Tjx Ab Aow Working Width: 500 mm Engine: Hatz 1B20 Diesel Engine Engine Power: 3.1 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium-heavy duty Surface Capacity: approx. 624 m²/h Highlights & Features: - Compact diesel vibratory plate for versatile applications - Robust construction – ideal for daily site use - 500 mm working width – high surface capacity in a compact design - Ergonomic guide bar – low-vibration & comfortable - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Fields of Application: ✓ Paving construction & medium-sized surface areas ✓ Landscaping & gardening ✓ Municipal works & construction companies ✓ Fiber optic & cable installation ✓ Compaction tasks on small to mid-sized sites Options: Available at extra cost only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals, and emissions. Data is transmitted wirelessly to the Wacker Neuson app and clearly displayed. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany & internationally upon request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded Further models and sizes available! Also in stock: DPU 3050, DPU 3750 and more ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2550 H NEW | Diesel Vibratory Plate 25 kN | 500 mm Vibratory Plate | Hatz Engine | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Construction Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! Upon request, we are happy to offer you a virtual machine inspection via video call.

Condition: new, functionality: fully functional, power: 4.2 kW (5.71 HP), fuel type: diesel, color: yellow, operation weight: 247 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 3750 Hts Vibratory Plate NEW Wacker Neuson DPU 3750 Hts Vibratory Plate – NEW | 37 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Item number: 5000610321 Technical Data: Manufacturer: Wacker Neuson Model: DPU 3750 Hts Condition: NEW Operating Weight: 247 kg Frequency: 90 Hz Centrifugal Force: 37 kN Working Width: 500 mm Dedpfx Abjzh Ed Ue Aekw Engine: Hatz 1B30 Diesel Engine Engine Power: 4.2 kW Fuel: Diesel Starting System: Recoil Starter Compaction Class: Medium compaction Surface Performance: approx. 624 m²/h Highlights & Features: - Powerful diesel vibratory plate for demanding compaction tasks - Robust design – ideal for daily construction site use - 500 mm working width – high area performance with a compact design - Ergonomic guide handle – low-vibration & comfortable - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-sized areas ✓ Landscaping & horticulture ✓ Municipal works & construction companies ✓ Fiber optic & cable installation ✓ Compaction work on small to medium-sized construction sites Options: Additional charges only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals, and emissions. The data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (District Wesel) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models and sizes available! DPU 5247 etc. also in stock ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson vibratory plate | DPU 3750 Hts NEW | Diesel vibratory plate 37 kN | Vibrating plate 500 mm working width | Hatz engine | Wacker Neuson compaction technology | Vibratory plate for paving Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner Dkjdpfx Ajzichaob Ajw • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Year of construction: 2026, condition: new, functionality: fully functional, Precise, ergonomic lifting and lowering. Dodpfx Aszt R H Sjb Ajkw The transfer height from mandrel to mandrel never matches unless you use the TECHlift S. Millimeter-precise vertical positioning of the roll in the production process. Ergonomically beneficial and back-friendly. Time-saving and environmentally friendly.

Condition: excellent (used), Weinig precision setting gauge Dodozw Ngfepfx Ab Aokw Mandrel – 50 mm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10900 € 209.28 € 1250 kg 1300 mm 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Dodpfx Abswv H Awo Askw Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: used, Year of construction: 1963, Technical details: Dsdpfevkpu Hsx Ab Aokw max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder Dkodpfx Asvmxcrjb Ajw -Type: SK40 x 32 x 510 -Shaft: Ø 32 mm -Dimensions: Ø 75 x 670 mm -Weight: 7,4 kg

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder -Type: SK40 x 40 x 400 -Shaft: Ø 32 mm -Dimensions: Ø 62 x 590 mm -Weight: 8.6 kg Dksdpfxsvmxdpj Ab Aew

Condition: used, tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder Djdpfx Asvaw Utjb Ajkw -Milling holder: cutter head holder SK50 6 pieces -Type: various versions see photos -Hole: Ø 40 mm -Price/Delivery: complete -Transport dimensions: 300/200/H240 mm -Total weight: 24.8 kg

Condition: used, tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder Dksdpfx Aovaxd Neb Aow -Milling holder: cutter head holder SK50 -Hole: Ø 60 mm -Dimensions: Ø 130 x 235 mm -Weight: 7.6 kg

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel Dkodpfxouhbxms Ab Aew - support arm for zero gravity wheel change - 1 balancing shaft

Condition: used, Tool holder, milling holder, milling tool, adapter, Weldon Dkedouhr R Hspfx Ab Ajw -Milling holder: test mandrel -Type: MK4 / Ø 30 mm W8802 C15 -Dimensions: Ø 31 x 300 mm -Weight: 1.6 kg

Condition: used, Year of construction: 1992, machine/vehicle number: 150258, Offer 24348 Technical data: - Infinitely variable pressure capacity 15 t - Infinitely variable stroke 150 mm - Mandrel bending device up to 6000 mm - Mandrel bending angle 180 ° - Drive 400 V / 4 kW - Space requirement approx. W 1500 x H 1200 x D 1100 / 7500 mm - Weight approx. 1500 kg - Bending capacity Dkodpfx Aout Uiqeb Ajw - Bending capacity horizontal bending flat bars 120 x 10 mm - Tube bending ( pressing process ) up to approx. 11/2 " - Mandrel bending up to 42 mm - Bending tools - Tube bending tools Horizontal bending - Mandrel bending tools steel approx. 21.3 R 50 ; 26.9 R 57 ; 30 R 67 ; - 33.7 R 72.5 ; 42.4 R 92.5 ; mm - Mandrel bending tools plastic approx. 10 R 60 ; 12 R 65 + 85 ; 17.2 R 100 - 28 R 65 ; 33.7 R 120 ; 36 R 100

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up Dksdpfxjt Hxago Ab Ajw to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: good (used), material lift, roll lifter, assembly lift, carpet roll lifter, lifting lift -Manufacturer: Eska, Materiallift carpet roll lifter 2 pieces / 1 set -Load capacity: max. kg -Lifting height: 415 to 1595 mm -Holder mandrel: see photos -Cable winch: Pfaff Price/Delivery: complete Dkodpfx Aov Egk Ieb Asw -Dimensions: 745/640/H1950 mm -Weight: 70 kg/piece

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Dkodpfxjxcx Ate Ab Aow

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible. Dodpfx Abjw Edptj Ajkw

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 600 h, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending radius (max.): 96 mm, mandrel length: 4,500 mm, overall weight: 1,000 kg, For sale is a pipe bending machine, purchased in 2021 and used for only two years. Since then, it has been stored in a dry warehouse. It can bend pipes with a diameter from 12 mm to 48.3 mm and a wall thickness of 4.5 mm. Dies/jaws and mandrels for steel and stainless steel pipes are included. Self-collection required upon sale. Dsdpfxexvhm Ie Ab Askw

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications Dksdpfez N Ahxjx Ab Ajw This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Condition: used, Year of construction: 2026, Slitting line 1500 x 6, made by GUIDA Line composition: - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls Djdpfxjymcias Ab Ajkw - Titling table - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Working Direction: From left to right Power supply tension: 380/50 Hz