Used Recoiler for sale (105)

Condition: used, Unwinding reel for coil material, DREHER - DIMECO Type 2370 BF Model 653, Year of manufacture 1979 Coil weight max. 2000 kg Coil width max. 320 mm Coil width with guide arms max. 320 mm Coil width without guide arms max. 480 mm Coil inner diameter 340-540 mm Coil outer diameter max. 1400 mm Center of reel crown to floor 900 mm Center of reel crown to reel base 870 mm Reel shaft, support shaft Ø 90 mm - Central spreading adjustment of the reel crown via hand crank (square drive 24 mm) - Mechanical brake on the reel shaft with manual brake force adjustment via hand crank - 6 coil guide arms 500 mm, with toggle clamp - Conversion to motor drive possible, motor mount available, sprocket for roller chain on the reel shaft available Footprint: Width: 170 cm x Depth: 138 cm x Height: 160 cm Djdpjz R D Snefx Ab Aokw Space required for transport: Width: 78 cm x Depth: 138 cm x Height: 120 cm Weight 430 kg Good condition

Condition: like new (used), functionality: fully functional, coil inner diameter: 508 mm, coil outer diameter: 2,000 mm, coil weight: 16,000 kg, coil width: 1,000 mm, product width (max.): 1,250 mm, year of last overhaul: 2022, Self-centering FLENDER recoiler + 2 self-centering FROHLING decoilers Coil set: TWO DECOILERS and ONE RECOILER Brand: - Frohling for decoilers - Flender for recoiler Completely overhauled and upgraded with AUTO-CENTERING and linear guides in 2022 (units were already in excellent condition, but lacked all accessories and the CPC auto-centering system) Capacity: 16MT Coil ID: 508mm / OD: 2000mm Max strip width: 1100mm (modifiable to 1250mm) Max line speed: 240m/min Independent lubrication with filter and pump Dodpfx Aju Hlauob Aokw Supplied without motors and speed gearboxes Ready for any inspection at our warehouse in Rovereto (TN), Italy If you have any questions, do not hesitate to contact us. IF INTERESTED, PLEASE CONTACT US — WE WILL CERTAINLY REACH AN AGREEMENT.

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Djdpjyn Shzofx Ab Askw Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: used, Year of construction: 1978, Year: 1978 – recently modernized TECHNICAL DATA: • Max. web width: 1450 mm • Max. unwind diameter: 1000 mm • Max. finished reel diameter: 400 mm • Hydraulic reel lifting • Circular slitting system • 4 Rewind shafts on two turrets • Pneumatic brake • Length measuring and control system Dodpfx Aoz Ern Sjb Aekw • Optical edge control Machine has been completely overhauled and equipped with new AC motors, a new cabinet and panels; new PLC Siemens S7; new Montalvo pneumatic brake and controls; new edge control for detecting edges from both the top and bottom.

Year of construction: 2017, condition: excellent (used), strip width: 800 - 2.400 mm strip thickness: max. 3,5 mm coil weight: 20 t Dsdjg Ewanspfx Ab Ajkw mandrel Ø: 600 mm

Condition: used, Technical specifications: Track width: 300 mm Working width of the roller: 300 mm Max. disc diameter: 350 mm Disc bore diameter: 70 mm Max. cutting height: 120 mm Deflectors (to prevent material from recoiling): 2 rows Central track lubrication: Electric Feed rate adjustment: Continuous Dkjdpo Ah E Upofx Ab Aow Feed motor: 1.1 kW Main motor: 25 kW Guide rail: YES Dust extraction port diameter: 200 mm Overall dimensions: Length: 2250 mm Width: 1800 mm Height: 1450 mm

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Dkedpfxehx R Etj Ab Aow Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Good condition - not electrically operational.

Year of construction: 1995, condition: good (used), strip width: max. 1.900 mm strip thickness: 0,3 - 3 mm Dedpfx Abjg Iigvo Ajkw coil weight: 25 t mandrel Ø: 508 mm

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Dkodpfx Abo Aflwye Aew

Condition: used, Year of construction: 2023, New exhibition machine! List price €11,950 net • Equipped with a TERSA cutterhead for ultra-fast cutter blade changes • The TERSA cutterhead system enables particularly quiet operation • Helically toothed steel feed roller for consistent and uniform material feed • Material feed with two speeds via a separate motor • The particularly long planing tables facilitate easy and precise adjustment of the workpieces • Work tables are made of cast iron, annealed and stress-free, making them durable and permanently flat • Planing tables that open simultaneously towards the rear for short setup times • Planing table adjustment via handwheel with numerical display for planing height • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Material removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helically toothed feed roller (ideal for economical planing of hardwood) • Quality - Made in Europe Equipment details: Tersa cutterhead • No more adjusting and screwing required • Cutter blade changes in seconds • Self-locking • Particularly quiet operation The material feed • Helically toothed steel feed rollers for a consistent and uniform wood feed without leaving marks • Several teeth engage simultaneously for powerful feed • Wear-free compared to rubber feed rollers Fixed dust extraction hood • Thanks to the fixed dust extraction hood, there is no need to change the dust extraction hose when retooling • This saves valuable working time Simultaneous opening of the planing tables • Simultaneous tilting of the planing tables with spring support for quick and convenient adjustment for thickness planing in seconds Thickness table adjustment • FS 41 elite s with thickness table adjustment via handwheel with integrated display • The thickness table is mounted on four large-sized spindles, which ensure maximum stability under all working conditions. • Thanks to the special lifting device, the table position remains perfectly maintained even without locking. Anti-recoil guards • Massive anti-recoil guards prevent workpieces from recoiling • The 4-cutterhead ensures an optimal planing result Anodized aluminum planing fence • Large-sized (1200 x 150 mm) • Easy to move • Adjustable from 90° to 45° via a scale • Supplied as standard with an auxiliary fence for safe planing of even narrow workpieces Technical description - Planer Overall length of the tables 2200 mm - Planer Working width 410 mm - Planer Material removal max. 5 mm - Planer Dimensions of the planing fence 1200 x 150 mm - Thickness Dimensions of the thickness table 775 x 410 mm - Thickness Working height min. 3 mm - Thickness Working height max. 240 mm - Thickness Feed speeds 6 / 12 m/min - Cutterhead speed 5000 1/min - Cutterhead diameter 95 mm - Number of cutter blades 4 pcs. - Electrical connection 400V / 50Hz - Motor power 5.0 kW - Dimensions (L x W) 2250 x 1440 mm - Dust extraction port diameter 1 x 120 mm - Weight 450 kg Dkedpfx Aez Ebprjb Aow Storage location: Rieth

Condition: excellent (used), Year of construction: 1995, operating hours: 50,000 h, functionality: fully functional, machine/vehicle number: 0,4-3, conveyor belt thickness: 3 mm, coil weight: 20,000 kg, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 160 mm, sheet thickness (max.): 3 mm, number of blades: 15, type of input current: DC, load capacity: 20,000 kg, space requirement height: 3,000 mm, feed roller diameter: 510 mm, Longitudinal slitting line for strips with a thickness from 0.4 mm to 3 mm. Decoiler 20 tons, diameter 510 mm / 610 mm, recoiler diameter 510 mm / 15 tons. The line is operational and can be tested. Operator training can be provided. Decoiler purchased in 2015, made in China. Recoiler purchased in 2021, manufacturer Poland. New electronics and new control system in 2021, manufacturer Poland. Dodpfx Aboynuwle Aekw

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms Dkodpfx Abowvv Rqe Aow - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, Machine description Dkodpfxez N Ahxe Ab Asw Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Dksdpfx Abjzzbfze Aew Max. saw blade diameter: 350 mm Continuously adjustable feed rate Automatic lubrication system Anti-recoil protection Culaga Dust extraction port: 200 Safety switch Power supply: 380 V Main motor power: 25 kW Overall dimensions: Length: 1730 mm Width: 1490 mm Height: 1440 mm

Year of construction: 1985, condition: good (used), strip width: 100 - 750 mm strip thickness: 0,5 - 4 mm Dkjdpfxed Ha Hbj Ab Aow coil weight: 10 t mandrel Ø: 406/508 mm

Year of construction: 1980, condition: good (used), strip width: 1.650/1.750 mm strip thickness: 0,4 - 3 mm coil weight: 10 t Dksdpfx Asdn I Hrob Aew interchangeable mandrels, Ø: 304/406/610 mm

Condition: good (used), SCM M3 – Guide rail: 300 mm – Cutting height: 120 mm – Motor power: 22 kW – Weight: 1850 kg – Max. workpiece width: 100 cm – Min. workpiece length: 40 cm Dedpfoyn E Ibsx Ab Ajkw – Continuously variable feed rate control – Three rows of anti-recoil guards – Spindle diameter: 50 mm – Arbor diameter: 70 mm – Arbor equipped with gears and 5 saw blades – Saw blade diameter: 200 to 350 mm – Automatic chain lubrication – Four upper pressure rollers The machine and guide rail are in very good condition.

Condition: new, functionality: fully functional, ✅ New stock ✅ €4,179 incl. VAT ✅ Available immediately ✅ Shipping possible The SCHORR RR1000DHKB crawler dumper is a powerful and versatile mini dumper with hydraulic tipping drive and a payload capacity of up to 1,000 kg. Powered by a 15 HP single-cylinder 4-stroke petrol engine, it effortlessly tackles rough terrain and inclines. The self-propelled dumper is equipped with a robust track drive, ensuring a secure stand and optimal traction. The generous loading platform allows for the transport of Euro pallets, even with sidewalls closed. The hydraulic tipping skip makes unloading considerably easier, while the automatic front-opening of the skip ensures complete emptying without manual assistance. Removable side panels make the platform flexibly extendable, allowing for easy transport of larger or bulky loads. Thanks to the intuitive crawler drive, the dumper can be maneuvered safely and precisely even on uneven ground. The foldable ride-on platform enables comfortable travel over longer distances, and the 6+2 speed gearbox ensures precise control and speed adjustment. With a maximum forward speed of 6 km/h and reverse speed of 3 km/h, complex maneuvers on the construction site are easily managed. The RR1000DHKB is designed for outdoor use, combining robust construction with user-friendly operation. The engine features a recoil starter, and all fluids—fuel, hydraulic oil, and gear oil—are easily accessible for maintenance and refilling. Dimensions: Total length 2240 mm, width 900 mm, height 1235 mm. The skip measures internally 1315 × 815 × 300 mm, externally 1390 × 880 × 300 mm, filling height closed 785 mm, and 485 mm without side panels. SCHORR provides comprehensive service: spare parts are always available, and repairs can be carried out in our workshop if necessary. Our team is available to answer your questions or offer advice regarding the RR1000DHKB crawler dumper. This dumper offers excellent value for money, is available immediately, and—thanks to its compact design and high payload—is the ideal solution for small to medium construction sites, landscaping, and industrial applications. We are happy to advise you and assist with any questions regarding the SCHORR RR1000DHKB crawler dumper. Dsdoxvbw Tspfx Ab Aekw

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 100 mm Smooth feed rate adjustment Automatic lubrication system Anti-recoil protection Culaga Dedpfx Abjzhuluo Askw Dust extraction port: 2x160 mm Safety switch Power supply: 380 V Main motor power: 22 kW Overall dimensions: Length: 1900 mm Width: 1580 mm Height: 1550 mm

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Dkjdpfx Asymcmfeb Ajw Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: excellent (used), Year of construction: 2004, CATALOGUE NUMBER 7880 Technical data: - max. cutting height 150mm - max. element width 500mm - working width of the saw blade shaft 400mm - shaft diameter 70mm Dkjdpoztac Njfx Ab Aew - max. saw blade diameter 450mm - top: - anti-recoil devices - 2 toothed feed shafts, pneumatically pressed - bottom: - sliding roller - anti-recoil devices - 2 toothed feed shafts - saw blade shaft - 2 toothed feed shafts - stepless feed speed adjustment via a frequency inverter - feed motor 3kW - main motor 55kW - overall dimensions L/W/H 2120x1600x1630mm - weight approximately 2750kg ADVANTAGES – Polish production – solid construction – used machine, very good condition Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, Equipment: CE marking, The Toro TX1000 with the Rhino Drive Master is a compact yet powerful mini-skid steer with an attachment designed for quickly and precisely driving posts and pipes into the ground. Work faster and significantly safer than with a manual post driver, sledgehammer, or loader. Level the mast, position the machine, and effortlessly drive an entire fence line into the ground. Key Features & Benefits: Dsdpfoz Irm Tex Ab Aekw The best and most effective combination for driving kilometers of posts. Powerful & Controlled Performance Long-stroke piston for better energy transfer and reduced recoil. Control valve that reduces hydraulic peak pressure. Between 700 and 1200 strokes per minute with a striking force of 203 Joules. Flexible Positioning Adjustable mast: 7° away from the operator, 15° towards the operator – ideal for precise alignment. Mounting from either side – ideal when only one side of the terrain is accessible. Compact & Compatible Ideally used in combination with other mini-skid attachments for efficient site preparation. Versatile Use Suitable for steel and wood round, square, and rectangular posts up to ø150mm outer diameter and 3 meters long. Oil pressure: 20 - 30 LPM at 70-140 bar The Drive Master is available for sale with or without the Toro skid steer loader. The combination is also available separately. The price listed in the advertisement includes the Toro TX 1000 with the Rhino Drive Master.

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Continuously adjustable feed rate Automatic lubrication system Anti-recoil protection Culaga Dust extraction port: 215x120 mm Safety switch Dsdpfx Aozhulbob Askw Power supply: 380 V Main motor power: 23.2 kW Overall dimensions: Length: 2300 mm Width: 1400 mm Height: 1350 mm

Condition: new, functionality: fully functional, power: 2.3 kW (3.13 HP), fuel type: gasoline, color: yellow, operation weight: 70 kg, Year of construction: 2026, motor manufacturer: Honda, Equipment: UVV, Wacker Neuson BS 68-4 A Rammer – NEW Wacker Neuson BS 68-4 A Rammer – NEW | 689 blows/min | 70 kg operating weight | Impact force 19 kN | Honda GXR 120 petrol engine | 28 cm shoe width Item number: 5100068375 Technical Data: Manufacturer: Wacker Neuson Model: BS 68-4 A Condition: NEW Operating weight: 70 kg Blow rate: max. 689 strokes/min Impact force: 19 kN Engine: Honda GXR 120 petrol engine Engine power: 2.3 kW Dkodpfx Abj Ahfd De Asw Starting system: Recoil start Shoe width: 28 cm Highlights & Equipment: - Powerful 4-stroke rammer – ideal for demanding compaction tasks - Robust Honda engine – reliable & low maintenance - Shoe width 280 mm – other sizes available - Compact design – for precise work in confined spaces - Made by Wacker Neuson – proven quality, immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & horticulture ✓ Compaction in trenches & narrow areas ✓ Municipal works & construction companies ✓ Fibre optic & network installation Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide and international delivery on request Pricing: Ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All details subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other versions available! Also available with 25 cm & 33 cm shoe plates ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson rammers | BS 68-4 A NEW | Petrol rammer with Honda GXR 120 | Compaction equipment for cable & trench work | Wacker Neuson quality Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new machines! Virtual machine viewing via video call available on request.

Year of construction: 1995, condition: good (used), strip width: max. 420 mm strip thickness: max. 12 mm Djdjbibqwjpfx Ab Aekw coil weight: 2,4 t