Used Tex 230 Pe for sale (12,845)

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, type of input current: AC, input voltage: 230 V, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 170 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 230 A, input frequency: 50 Hz, Equipment: documentation/manual, EWM Tetrix XQ 230 puls AC/DC Expert 3.0 – Industrial TIG welding system with water cooling, extensive accessories, and a transport cart For sale is an EWM Tetrix XQ 230 puls AC/DC Expert 3.0 TIG welding system from the current generation of devices, featuring a large 7-inch graphic display, comprehensive Expert 3.0 control, and active water cooling. The system was purchased in 2023 and has been used very little due to a change in the intended application. The operating time is verifiably less than 50 hours. Consequently, the device is in near-new condition, both visually and technically. No dents, scratches, or other signs of wear. The excellent condition can be seen in the pictures. Additional pictures can be provided upon request. The welding system is sold with a comprehensively equipped complete set, which provides high-quality equipment for professional TIG welding in an industrial environment and enables immediate use. Fodpfx Aj Aicx Dsgxegi Scope of delivery: - Welding system: EWM Tetrix XQ 230 puls AC/DC Expert 3.0 with 7-inch graphic display (fully digital control, details see manufacturer's website) - Cooling module: EWM Cool XQ 40 for water-cooled welding - Transport cart for the welding system and gas cylinder - Water-cooled TIG torch, 4 m length, suitable for the Tetrix XQ system - Foot control for precise control of the welding current, particularly advantageous for aluminum welding - Comprehensive TIG accessory package, including various gas nozzles (shape and diameter), collets, tungsten electrodes in different diameters and designs, as well as gas lenses and other wear parts (see detailed pictures - the photos are of the product being sold). Most of the accessories are new or unused. - Transport case for storing the accessories - Several pairs of leather gloves, size 8 - Ground cable - Gas hose - Gas pressure regulator - Operating instructions A first-class equipped TIG welding system for demanding applications, where condition, low operating hours, and extensive accessories are convincing. Ideal for professional users looking for a high-quality EWM system without having to compromise on a comprehensive accessory package. Note: Not all components of the scope of delivery are shown in the pictures. The sale includes all components listed above.

Condition: used, functionality: fully functional, For sale: Motan METRO HES 50 vacuum conveyor for granules, designed for transporting plastic granules, including feeding injection molding machines. The unit is equipped with a stainless steel tank, an integrated suction unit, and an electronic control panel with a digital display. Technical data according to the nameplate: Manufacturer: motan GmbH Model: METRO HES 50 Power supply: 230 V, single-phase, N and PE Frequency: 50/60 Hz Power consumption: 1.1 kW – 1100 W Current draw: 4.8 A Control voltage: 24 V DC / 230 V AC Protection: 10 A, time-delay Country of manufacture: Germany CE marking Condition: used, visible signs of wear. Fgedpe Aibgqefx Agxji The set includes the unit with the control panel, cables, and connectors as shown in the pictures. The scope of sale corresponds to the pictures.

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, Demonstration model, still in the box, Fgjdpsz Az D Iefx Agxsi

Condition: used, Year of construction: 2015, machine/vehicle number: PR32, Used HUSKY HPETL eletric injection molding machine - 230 ton 48 cavity - Year 2015Technical Specifications & Performance DataThis Husky electric injection molding machine is designed for high-output PET preform manufacturing in industrial packaging and beverage production environments. Manufactured in 2015, the HPETL230E-RSE95D-95 is configured with a 230-ton clamping force and a 95 mm screw, providing a robust platform for repeatable preform molding operations.Manufacturer: HuskyModel: HPETL230E-RSE95D-95Year: 2015Clamping force: 230 tons / 2254 kNScrew diameter: 95 mmInjection capacity: 2658 cm³Cavity configuration: 48 cavitiesIncluded mold configuration: 14 g preform, 48 cavities, 30 mm neckAdvanced Automation & Control SystemsThe machine is supplied with a robot to support automated preform handling after molding. Its electric injection molding architecture is intended to provide controlled, repeatable movements throughout the molding cycle, supporting stable production in a PET preform manufacturing process.Electrical supply: 230 VFrequency: 50–60 HzElectrical system: 3PH-PESupply current: 345 ALargest motor: 338 ALargest heat load: 243 AShort-circuit current rating: 5 kAAutomation included: robotProduction Line Integration CapabilitiesThis injection molding machine is suitable for integration at the start of a used bottling line or PET container production system, where preforms are produced before downstream reheating and stretch blow molding. The included 48-cavity mold is configured for 14 g water preforms with a 30 mm neck, supporting preform supply for water beverage production.In an industrial packaging installation, molded PET preforms can be transferred to collection, storage, inspection, cooling, or downstream blow molding equipment. The 48-cavity configuration supports continuous high-volume preform manufacturing for integrated beverage production operations.Machine Condition & Maintenance HistoryThe Husky injection molding machine is still in production, indicating that it is operating in an active manufacturing environment. This status allows buyers to evaluate the equipment in its current production context and assess its operating sequence, mold setup, robot integration, and preform output configuration.The supplied mold is described as including the cold part only. The machine package also includes the robot used for automated handling within the molding operation.Operational Performance & VersatilityThe HPETL230E-RSE95D-95 is configured for PET preform molding rather than direct bottle filling or packaging. Its supplied 14 g, 48-cavity mold is intended for water preforms with a 30 mm neck, making the machine relevant for producers seeking in-house preform manufacturing for water bottling applications.Electric injection molding equipment of ... Fgsdpfx Ae Aiub Eogxei

Condition: used, Year of construction: 2018, operating hours: 172 h, power: 375 kW (509.86 HP), Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, * incl. sweeper attachment * incl. mowing unit ----* enclosed cab * air conditioning * CD radio ----* PTO shaft, front and rear * front and rear lift * front hydraulics * 3 hydraulic control circuits * all-wheel drive -----* tire size, front: 240/70R16 Fodpez Ta R Sofx Agxjgi * tire size, rear: 360/70R20 * technical gross weight: 2400 kg * unladen weight: 1820 kg * permissible trailer load: 40000 kg * overall length: 3031 mm ----Vehicle number: 12520-----Errors and prior sale excepted.

Condition: used, Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, Gearbox Movigear Type MGFAT2-DSM-DSC-B/IV/WA/PE/A i 55,25 Fodpfxerqipgs Agxsgi -Speed: 3.6 to 36.2 rpm -Hollow shaft: Ø 30 x 90 mm -Individual components: see photos -Number: 3x gearbox available -Price per piece -Dimensions: 230/170/H365mm -Weight: 16 kg/piece

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 / H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH * Depending on the filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for small to medium-sized machine workrooms. Your advantages: - Compact dimensions - High-efficiency EC fan as standard - Adjustable speed and air output (optional) - Washable pre-filter - H13 particulate air filter separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application Fgodjh Rynqopfx Agxsi - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON-series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 /H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany * Depending on the filter equipment Special voltage or special colour on request Your advantages: - Compact dimensions - ISI-TRONIC as standard - Electronically controlled EC fan as standard - Adjustable speed and air flow - Washable pre-filter - H13 particulate air filter provides separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit Fgsdpfx Agsh Rynujxoi which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON- -series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Fgedpfxeh Rdwxe Agxoi Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials.. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade Fsdpfxewgc I Re Agxegi • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, High-voltage tester, high-voltage test device, high-voltage tester for HV, PE, IS measurement Test console, test station, measuring station, test device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The device PE/IS/HV / 91-3J.3 is used to measure voltage strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable direct voltage with low ripple. Fjdpfsd Dc Unex Agxjgi One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Noise suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57820 and 57821.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material Fsdpsfnlkwefx Agxegi • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: new, The Lutz Type ME II 5-230 is a professional, industrial-grade explosion-proof universal motor designed for drum and container pumps. Manufactured by Lutz Pumpen, it is specifically engineered for safely transferring highly flammable, combustible, and hazardous low-viscosity liquids such as solvents, fuels, and alcohols. Specifications Voltage: 220–230 V AC / 50 Hz (Single-phase power) Power Output: 540–580 W (approx. 0.78 HP) Current: 3.0 A Enclosure Protection: IP54 (Dust and splash-water protected) Explosion Protection Rating: ATEX certified (II 2 G Ex de IIC T6) Weight: Approximately 6.6 kg (14.5 lbs) Key Features & Safety Mechanisms Double-Shell Housing: Built from robust, chemical-resistant materials to protect internal components from corrosive vapors and heavy handling. Low-Voltage Release (LVR): An essential safety feature that prevents the motor from automatically restarting after a power outage, protecting operators from unexpected spills or splashes. Quick-Action Coupling: Allows for rapid, tool-free connection to various Lutz pump tubes (immersion tubes) made of polypropylene, PVDF, stainless steel, or aluminum. Fgsdpfsz Erynex Agxei Brand new never used. Please check out our other listings as well.

Condition: new, For sale: Original KSB RIO50-40D circulation pump, brand new, in its original packaging. The pump is intended for heating and cooling installations, as well as for applications in building technology and industry. ⸻ Technical Data • Manufacturer: KSB • Model / Type: RIO50-40D Fgodpfx Ajz Sln Iegxoi • ID Number: 29 132 136 • Power supply: 230V, 3~ 400 V / 50 Hz • Number of speeds: 3 • Power consumption (P1): 180 / 240 / 330 W • Nominal diameter: DN50 • Connection: flanged • Operating pressure: PN6 / PN10 • Max. medium temperature: 130°C • Protection class: IP44 • Insulation class: H • Weight: approx. 14.1 kg • Manufactured in: EU ⸻ Condition • New, unused • Original KSB packaging • Manufacturer's manual included • Condition exactly as shown in the pictures ⸻ Applications • Central heating systems • Heating and cooling circuits • Industrial and commercial facilities

Condition: excellent (used), Catalog number: 7548 TECHNICAL DATA track width 250mm roller width 250mm max. blade diameter 350mm blade bore diameter 80mm max. cutting height 120mm table width with clearance 700mm table length 1790mm *from above: rollers pressure roller, smooth rollers pressure roller, smooth saw blade roller smooth pressure rollers 2 pcs from below: guide rail sliding roller, smooth rollers track central lubrication feed motor 1.1kW main motor 30kW electric lifting of the machine body manual lifting of the saw blade roller diameter of the extraction nozzle 160mm overall dimensions L/W/H 2250x1700x2000mm approximate weight 3000kg – German made – electric lifting of the machine body and roller – smooth adjustment of feed speed Fjdpozwwuqofx Agxjgi – multi-blade saw, used, very good condition Net price: 68900 PLN Net price: 16023 EUR depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Fodpfxew Nac As Agxegi Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, mileage: 169,478 km, power: 172 kW (233.85 HP), first registration: 03/2021, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,290 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, DAF LF 230 Schmitz refrigerated box body, 2 compartments * Schmitz refrigerated box body * BÄR underfold tail lift, 1,500 kg lifting capacity * Air conditioning * Rear view camera * Thermo King T-800 R Spectrum * 2 compartments * Loading space length: 7.2 m * Loading space height: 2.29 m * Loading space width: 2.5 m * German truck * 1 previous owner * Schmitz refrigerated box body * Left cooling compartment dimensions: 83 cm width * Right cooling compartment: 83 cm width, 4.6 m length, lockable by fold-down door * Thermo King operating hours: Diesel: 4,382 h, Electric: 47 h * Webasto heater * Air conditioning * Differential lock Fgodjyzk Smepfx Agxsi * Cruise control * Tyres: front 245/70 R 17.5, 6/7 mm tread * Rear: 245/70 R 17.5, 8/8/9/9 mm tread * Main inspection / safety inspection renewed before sale * All information without guarantee * Further details and additional services upon request * Repainting, retrofitting possible * Short-term license plates / export plates * Transfer and shipping possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing available. We have worked with various leasing companies for many years and can therefore offer optimal financing solutions for each customer. We can often help clients with less-than-perfect credit and connect them with suitable leasing partners. * Own workshop * We speak Polish, English, and Russian. * The repainting in your desired color is possible in-house at a reasonable price and with high quality. * Are you located further away and unable to visit us to inspect and check the truck? No problem. You are welcome to appoint an independent expert of your choice to carry out a technical and visual inspection of the truck. Should an issue arise contrary to expectations, we can resolve it quickly and effectively in our workshop. Furthermore, for an additional fee, we can deliver your newly purchased used vehicle Europe-wide.

Condition: used, Year of construction: 2014, workpiece weight (max.): 3,000 kg, travel distance X-axis: 1,200 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, Coordinate Measuring Machine Manufacturer: MITUTOYO Fgodpezbc Hhjfx Agxji Type: Crysta-Apex S123010 Year of manufacture: 2014 Technical data: - X-axis: 1,200 mm - Y-axis: 3,000 mm - Z-axis: 1,000 mm - Resolution: 0.0001 mm - Max. workpiece height: 1,200 mm - Max. workpiece weight: 3,000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Charger Fgedpfx Agjy Up Utoxji

Condition: like new (used), Year of construction: 2018, operating hours: 4,918 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: TOYOTA LPE 200 * EX * Pyroban 3D / Zone 22 * ID: 24090.5905 Category: Used Forks: 1150 x 570 mm Capacity: 2000 kg Year: 2018 Operating hours: 4918 hours Battery: Completely NEW * 24v / 344ah * Year 2025 Fodpfjzut Arjx Agxegi Options: * EX * Atex - Pyroban !!!! Gas group = IIIB Type = 3D (approved for ZONE 22) Temperature class = T4 (135°C)

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Konica Minolta AccurioLabel 230” digital label printing press Item for sale: 1 x Konica Minolta AccurioLabel 230 with the following specifications: Includes unwinding and rewinding unit Fgodpfx Ae Agflqjgxsi Includes longitudinal cutting unit (Crush Knives) Includes overprint sensor kit Includes static elimination system Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 506,587 Black: Approx. 19,710 Colour: Approx. 486,877 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course also welcome to contact us directly

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Fedpfxsxmkcms Agxjgi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 230 t, throat depth: 300 mm, distance between stands: 4,050 mm, back gauge: 600 mm, working length: 5,000 mm, TECHNICAL DETAILS Pressing force: 230 t Bending length: 5,000 mm Fjdpfx Aoyg D Absgxsgi Distance between uprights: 4,050 mm Installation height: 800 mm Ram stroke: 500 mm Throat depth: 300 mm Backgauge: 600 mm Control: BC 45 Graphic MACHINE DETAILS Total power requirement: 18.7 kW Machine weight: approx. 22.0 t Space required: approx. 6.0 x 2.2 x 3.75 m EQUIPMENT 4 backgauge fingers Crowning device Manual finger height adjustment via crank 140 mm Front groove in the table Various tools

Condition: used, mileage: 30,100 km, power: 235 kW (319.51 HP), first registration: 11/1976, fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,170 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, total length: 8,830 mm, total width: 2,500 mm, Equipment: crane, tachograph, = Additional Options and Accessories = - Mechanical tachograph - Hub reduction - Power take-off (PTO) = Further Information = Tire size: 14.00 R 20 Front axle: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 1: Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 2: Tire tread depth left: 70%; Tire tread depth right: 70% Unladen weight: 13,125 kg Payload: 8,875 kg Fodsz D Ib Espfx Agxsgi GVW: 22,000 kg Crane: Palfinger PK 7500 N, located behind the cab Damage: None

Condition: refurbished (used), Year of construction: 2021, operating hours: 45 h, machine/vehicle number: 202021, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Fgjdewrn Iyjpfx Agxsi Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified.