Used Post Reamers for sale (2,860)

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Sterilization process: Vacuum-assisted steam sterilization Sterilization temperature: 121–134 °C Vacuum cycles: Pre- and post-vacuum Chamber material: Stainless steel AISI 316L Pipe material: Stainless steel AISI 316L MACHINE DETAILS Control: PLC-based control Operation: HMI touchscreen Monitoring: Real-time cycle control with batch documentation Sensors: Integrated temperature and pressure sensors Standards: EN 285, PED, ISO 9001, GMP Validatability: According to ISO 17665 EQUIPMENT Ndedpfx Aoz I Ti Njbyec Stainless steel sterilization chamber with polished surface Vacuum pump system for pre- and post-vacuum Steam generation and steam distribution system PLC control with HMI touchscreen Integrated temperature and pressure sensors Diagnostics: Integrated self-test functions Media supply: Steam, water, compressed air, and power supply Door operation: Automatic Door locking: Safety interlock to prevent opening under pressure

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K Ndedpfx Asz I Tt Iebysc MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: used, Year of construction: 1971, The Heidelberg GTP is a high-performance hot foil stamping press, currently operational in a printshop in Germany. Designed for precision and versatility, this machine handles a wide range of applications, from luxury packaging to security printing. Nsdszwf Ufepfx Abyedc With a maximum sheet size of 340 x 460 mm and a minimum of 85 x 102 mm, the GTP accommodates diverse project requirements. It operates at speeds between 1,500 and 4,000 sheets per hour, delivering both efficiency and flexibility. The press features a punching pressure of 60 tons, ensuring crisp, high-quality foil application on various substrates. Weighing approximately 2,250 kg and with compact dimensions of 2.08 x 1.48 x 2.10 meters, the GTP is built for stability and ease of integration into existing workflows. The machine comes complete with all necessary tools, accessories, and a sturdy frame, making it a turnkey solution for any finishing department. Format: 340 x 460 mm Equipment: Hot Foil Stamping Tiegel Heidelberg GTP Size min. 85 x 102mm Size max. 340 x 460mm Speed min. min. 1.500sph - max. 4.000sph Punching pressure 60T Weight approx. 2250kg Dimensions 2,08 x 1,48 x 2,10m Complete with tools and accessories include frame

Condition: excellent (used), Year of construction: 2011, operating hours: 12,500 h, Ref:11160 . 2011 Muller Martini Acoro A5 Preparation Binder ONLY 12,500 HOURS WORKED! Preparation line for producing lined book blocks for hard cover production or soft bound books. Ndedjz Izapepfx Abyoc Comprising: Triple hand feed element to spiral raceway element 3641 M.M. 3648 Twin end sheet feeders with Robatech hot-melt gluing M.M. Automatic motorised make-ready with “Commander” control system M.M. ‘Acoro A5’ binder with 20 x 21” Combi-clamps ICS 80 & ICS 30 Hot-melt pre-melt tanks Hot-melt spine gluing Hot-melt side gluing Gauzing/lining unit Pile/rotary cover feeder with pressing & nipping station 2nd nipping station Lay-down delivery unit to; Flat conveyor system (details on request) to; M.M. 3671 ‘Merit S’ automatic pile trimmer with auto setting. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 108296200602, input voltage: 400 V, Year: 2020 • the machine is in production Status: very good, functional Specifications: • speed: 300 packages / h Nsdpfxo Aa Iudj Abyedc • maximum height on pallet: 1400 mm

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 169083, 2013 Single Sided B2 D&K Europa Laminator Installed used April 2024 refurbished with new rubber rollers and temperature sensor Reason for sale - upgrading to double sided Njdpez E Nfuofx Abyodc

Condition: excellent (used), Year of construction: 2022, joke Technology ENESKA PostPro – Post-processing station for 3D printing Manufacturer: joke Technology GmbH Type: ENESKA PostPro Njdpfx Aszrvd Hebysdc Year of manufacture: 2020 Machine type: Post-processing station for additively manufactured components For sale is a used joke ENESKA PostPro post-processing station for the professional post-processing of additively manufactured plastic components. The system was specifically designed for the depowdering, deburring, grinding, polishing, and finishing of 3D-printed components and features a closed processing chamber with integrated extraction technology, LED lighting, and convenient tool control. The scope of supply includes a comprehensive original accessory package with various electric and pneumatic processing tools, abrasives, and other accessories as shown in the pictures. Technical data: Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Power supply: 400 V / 50–60 Hz Connected load: 6,500 VA Fuse: 16 A slow-blow Output voltage (U20): 24 V Working chamber volume: approx. 560 l Working chamber: Large stainless steel working chamber Closed processing chamber Large viewing window LED working chamber lighting Integrated compressed air connections Connections for multiple processing tools Equipment: Touchscreen control HEPA H13 filter system Closed processing chamber Manual operations with protective gloves Perforated stainless steel work table Tool connections for electric and pneumatic tools Height-adjustable machine feet Tool package: Electric precision grinder Electric high-speed grinder Pneumatic belt grinder Compressed air blow gun with spiral hose Compressed air hoses Original joke replacement gloves Grinding belts Grinding pins Grinding discs and flap discs Plastic hammer Screwdriver Other accessories as shown in the pictures Dimensions: External dimensions: approx. 1,437 × 1,685 × 1,640 mm Weight: approx. 748 kg Transport data: Weight: approx. 748 kg Easy loading using a forklift or crane. Condition: Used Machine from industrial use. Optical condition as shown in the pictures. Scope of supply: joke ENESKA PostPro Electric and pneumatic processing tools Compressed air accessories Original replacement gloves Grinding and consumable materials Other accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 183 h, total length: 685 mm, total height: 1,070 mm, total width: 645 mm, overall weight: 120 kg, input voltage: 230 V, laser power: 30 W, feed length X-axis: 165 mm, feed length Y-axis: 165 mm, feed length Z-axis: 300 mm, space requirement length: 1,495 mm, space requirement height: 1,870 mm, space requirement width: 1,255 mm, Formlabs Fuse 1+ 30W SLS Production Cell: 2 Printers, Fuse Sift with Industrial Vacuum, Fuse Blast with Polishing System and 4 Build Chambers Complete, ready-to-run SLS production system in great condition, sold as one package What is included - 2 x Formlabs Fuse 1+ 30W SLS 3D printers (230V), each with 2 build chambers (4 in total) - 1 x Formlabs Fuse Sift powder recovery station (230V) - 1 x Formlabs Industrial Vacuum 230V, supplied with the Sift [hose and accessories included] - 1 x Formlabs Fuse Blast automated blasting station with the Fuse Blast Polishing System upgrade (cleans and polishes in one step) Hours and condition - Printer 1: 1,369.68 print hours - Printer 2: 183.6 print hours (very low) - All units in great condition. Serial numbers available on request. Why this setup Four build chambers across two printers let you swap chambers and start a new print as soon as the last one finishes. The Sift and vacuum handle powder recovery and the Blast handles finishing, so no further post-processing equipment is needed. Key specification (per printer) - Build volume: 165 x 165 x 300 mm - Laser: ytterbium fibre, 30 W - Layer thickness: 110 microns - Materials supported by Formlabs: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A - Power: 230V, dedicated circuit Offers: offers on the full package are welcome. A separate sale of one printer may be considered for the right offer; please message to discuss. Ndsdpfx As Adqx Tebyoc Collection and delivery: not included in the price. The buyer arranges and pays for collection or pallet freight, including packing and loading. Each printer weighs about 120 kg without chamber or powder, so a forklift or tail-lift is needed. Allow access of about 125.5 x 149.5 x 187 cm per machine. Viewing by appointment.

Condition: refurbished (used), Refurbished Multigraf Touchline CF375 Creaser Folder Availability: In Stock Condition: Fully refurbished - including a new Care Kit B, full new rollers, fold bar, feed belts, and various smaller internal components. Exceptionally low usage, with a lifetime sheet count of just 86,000. Overview The Multigraf Touchline CF375 is a premium creasing and folding system designed to produce professionally finished documents with exceptional accuracy, reliability and ease of operation. Manufactured in Switzerland, the CF375 combines precision engineering with fully automatic setup, making it one of the most highly regarded creaser folders available for commercial print finishing. Designed for commercial printers, digital print providers, universities and corporate print rooms, the Touchline CF375 creases and folds in a single pass while handling a wide variety of coated and uncoated media from 80 to 400gsm. Its patented Swing-Bar creasing system virtually eliminates fibre cracking, while the Pro-Knife folding technology delivers precise, repeatable folds across a broad range of applications. Every refurbished Multigraf Touchline CF375 supplied by Glendale Presentation Solutions is professionally refurbished by our experienced engineers, fully tested and supplied ready for immediate production. Whether you're producing folded brochures, greetings cards, menus or premium marketing literature, the Multigraf Touchline CF375 delivers exceptional finishing quality with minimal operator intervention. Key Features Fully automatic creasing and folding system Top-fed vacuum suction feeder Multigraf Swing-Bar creasing technology Multigraf Pro-Knife folding system Automatic setup via colour touchscreen Crease and fold in a single pass Crease only or fold only operation Nedpfs Abaq Tsx Abysdc Up to 20 creases and 2 folds per sheet Processes media from 80–400gsm Sheet sizes from 105 × 148mm up to 375 × 660mm (up to 1,050mm with extension) Production speeds of up to 6,000 sheets per hour High-capacity shingle delivery Job memory for repeat work Choice of standard and narrow crease tools Swiss manufactured Why Choose the Multigraf Touchline CF375? The Multigraf Touchline CF375 has earned an outstanding reputation throughout the print industry for its exceptional build quality, reliability and finishing quality. Manufactured in Switzerland, it combines precision engineering with innovative creasing and folding technology to deliver professional results day after day. Its patented Swing-Bar creasing system produces crisp, professional creases without stopping the sheet, significantly reducing the risk of fibre cracking on digitally printed and coated stocks. Combined with Multigraf's Pro-Knife folding technology, the CF375 delivers accurate folds and excellent registration while maintaining high production speeds. Automatic setup via the touchscreen control panel dramatically reduces make ready times, allowing operators to switch quickly between jobs with minimal manual adjustment. Whether you're producing folded brochures, greetings cards, menus, direct mail or premium marketing literature, the Touchline CF375 delivers the productivity, flexibility and finishing quality demanded by busy print environments.

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Ndjdpfsz N Ahxox Abyoc Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Condition: excellent (used), Year of construction: 2003, Ref: 11164 . 2003 Muller Martini ‘Acoro A7’ Perfect Binder High speed perfect binding line (7,000 p/h) Comprising: 16 x 1573 top loading feeders + hand feed M.M. ‘ASAC’ calliper control M.M. ASIR signature recognition Jogging unit 3643 and spiral raceway element 3641 M.M. 3614 reject unit M.M. Automatic motorised make-ready with “Commander” Control System. Programmable with data retrieval. Menu-guided set-up and on-the-run adjustment Book transfer section with main drive motor M.M. 3027-22 ‘Acoro A7’ binder with 22 clamps Spine preparation units with cutting/milling & notching/brushing Interchangeable glue tanks comprising; PUR spine glue pre-melt tank PUR spine gluing tank Njdpfx Aj Aa Atbjbyodc EVA hot-melt spine glue pre-melt tanks, 80 & 30 litre capacity, floor standing EVA hot-melt cam-controlled spine gluing tank on universal base EVA hot-melt cam-controlled side gluing tank on universal base Pile/rotary cover feeder with scoring Cover nipping station with 2 x nipping stations Lay-down delivery unit to; Spiral tower & conveyor system M.M. Zenith three knife trimmer to; Solema ‘Giove Speed’ Compensating book stacker Including accessories, tools & manuals. Accessories: BDM Book Measuring Station Specification: A7/24” Binder book sizes, Max: 510 x 320 mm Min: 140 x 100 mm Book thickness : 3 -- 60 mm Clamp opening, Max: 82 mm Open cover width : 203 - 642 mm Mechanical speed, Max: 7,000 cycles/hr.

Condition: used, Layher AR Upright with pin – vertical base for the Allround scaffolding system Used Layher AR uprights with pins for constructing stable and versatile scaffolding structures. Thanks to the characteristic ring system, various Layher Allround components can be quickly and efficiently connected. The uprights are made of steel and suitable for intensive professional use in construction, renovation, and industry. 🔧 Specifications Brand: Layher Type: Allround system Design: Upright with pin Material: Steel Condition: Used Available sizes: 0.50 m 1.00 m 1.50 m 2.00 m 2.50 m 3.00 m 4.00 m ✅ Advantages Fast assembly thanks to the Layher ring system Ndjdpfx Aj Aawavjbyjc Sturdy base for various scaffolding structures Suitable for intensive professional use Available in multiple lengths Easy to combine with other Layher Allround components Widely applicable for different scaffolding setups Application Suitable as a vertical upright within Layher Allround scaffolding structures. The integrated rings allow for the connection of ledgers, diagonals, and other system components at different heights.

Condition: used, Year of construction: 2013, KONGSBERG CUTTERS HAVE SUPERB BUILD QUALITY, COMPREHENSIVE TOOLING, CUTTING ACCURACY AND GREAT SOFTWARE REFURBISHED 2013 KONGSBERG XP24 CUTTER Excellent condition 3200 x 1680mm work area 1Kwatt Router for milling (refurbished new spindle) Heavy duty tool / large & small crease wheels V Notch tool, high force knife, oscillating knife I cut software / PC New conveyor belt recently fitted Nsdpfx Aboz S Hx Hjyjdc 3 Phase extractor, 6kwatt Busch vac pump & silencer

Condition: excellent (used), Year of construction: 2017, operating hours: 14,000 h, Ref:11152 . 2018 Muller Martini Presto II Latest model short makeready stitcher - Only 14,000 hours worked! Equipped with: 9 station track and chain 6 × 1551 twin feeders + 2 x hand feed 1528 cover folder feeder Presto II 1550 stitching unit with central operator control Ndjdpfx Aez Ek Iwebysc 2 x HK75Q stitching heads 1565 three-knife trimmer 1564 shingle delivery Specification: Max. untrimmed product: 365 × 305 mm Min. untrimmed product: 105 × 115 mm Max. trimmed product: 360 × 300 mm Min. trimmed product: 140 × 76 mm Max product thickness: 10 mm Max speed: 9,000 cycles/hour

Condition: excellent (used), Year of construction: 2021, Ref:11155 . 2021 Horizon Stitchliner Mark III Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 30 station (1 x VAC 1000Ha + 2 x VAC 1000Hm) 10 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt. Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Nodpfoz Hz Evex Abyodc Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Year of construction: 2019, condition: used, functionality: fully functional, overall weight: 5,425 kg, machine/vehicle number: 3037, Scodix Ultra 202 – Refurbished Counter reading: Foil copies: 1,731,153 Total copies: 3,459,082 Specifications: Power supply: 400 VAC, 3P+N+PE; 63A x3; 50/60 Hz; SCCR: 10kA Made in Israel Year of manufacture: 12/2019 Weight: 5,425 kg Dimensions: 7880 x 1790 x 1979 mm Foil roll width: 50-500 mm Maximum foil roll diameter: 30 cm Number of rolls that can be used simultaneously: 4 Layer thickness: 5 - 250 microns Maximum layer thickness: 700 microns Basis weight: 135-675 g/m² Resolution: 2540 x 450 dpi Maximum format: 545 x 788 mm Minimum format: 297 x 420 mm Maximum image area: 748 x 504 mm The machine is fully functional. The machine is available in Essen. Transport can be negotiated individually. Njdpfx Abez Imi Nsyodc

Condition: excellent (used), Year of construction: 2020, Ref:11144. 2020 Horizon BQ-480 EVA Ndedpsz Aklaofx Abyjc Late model perfect binder in excellent condition. Perfect binder designed for operation by one person with moveable touch-screen control panel for easy set-up. Customised set-up accounting for paper type, signature or loose sheet, sewn book blocks, notch binding, etc. Comprising: BQ-480 binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction EVA hotmelt roller type spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Improved delivery table for gentle handling of thicker or PUR bound books. Including accessories, tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr

Condition: refurbished (used), functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K JupiterAutomated B2 Laminator Refurbished and in excellent working condition. Key features and specifications: - Model: D&K JUPITER 5474 (automatic laminating machine). Nsdszzmr Hjpfx Abysdc - Controls: PLC with touchscreen interface; daily and total counters provided. - Pressure and handling: adjustable pneumatic pressure; automatic sheet separation via a bursting roller; adjustable anti-blocking during production. - Heating: robust chrome-plated heated cylinder with oil bath. - Sheet size range: minimum 210 mm × 220 mm; maximum 540 mm × 740 mm. - Supported paper weights: 115 gsm to 450 gsm. - Feeder: automatic feeder with a stated capacity of 80 cm. - Film thickness: from 22 µ to 42 µ. - Operating speed: 30 meters per minute. - Electrical: 400 volts (3 × 16 A); power:7 kW. - Physical: dimensions H = 1400 mm × W = 1950 mm × D = 1200 mm; weight 650 kg.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Nedpfxszv T Auj Abyodc Buhrs BB700 - 14K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just passed through our complete maintenance program. The machine is therefore 100% complete works like new. Please come over for a test if you like.

Condition: excellent (used), Year of construction: 2020, Ref: 11147 . 2020 Horizon HT-80 Three-Knife Trimmer Fully automatic three-knife trimmer designed for short-to-medium-run and digital/book-of-one production. Can work offline or inline with Horizon binders up to 1,000 cycles/hour, 51 mm book thickness, automatic setup and book-of-one capability Features: Automatic size setup via colour touchscreen: input the untrimmed and finished book dimensions and the machine automatically positions the relevant sections. Servo-controlled jogging and clamping provide accurate registration, while the swing-knife cutting action is designed to give a clean three-side trim. Also capable of book-of-one production. Books of the same finished size but different thicknesses can be processed consecutively It can run inline with Horizon BQ-470, SB-07 and SB-09S systems, as well as offline. Specification: Untrimmed book size – Max. 330 × 330 mm Untrimmed book size – Min. 145 × 105 mm Ndsdpfx Aez Akmkobyec Finished book size – Max. 300 × 300 mm Finished book size – Min. 139 × 99 mm Book / trim thickness: 1–51 mm Maximum head & foot trim: 30 mm each Maximum fore-edge trim: 30 mm Production speed: 400–1,000 cycles/hour Clamping pressure: 4–8 kN, up to 10 kN depending on conditions Clamp drive: Servo motor Standard formats: A4, A5, 8.5 × 11", 5.5 × 8.5" Job memory: 200 jobs Dimensions: 1,610 × 2,610 × 1,515 mm W × D × H Power: 3-phase, 200–230 V, 50/60 Hz; 380/400/415 V versions via transformer

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Nodszv Tz Ropfx Abyjdc Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just passed through our complete maintenance program. The machine is therefore 100% complete works like new. Please come over for a test if you like.

Condition: excellent (used), Year of construction: 2020, Ref: 11145 . 2020 Horizon AFC-566 FKT Automated B2 size folding machine with up to 14 different folding patterns. Equipped with: Flat pile feeder Pro-Face touch screen control Computer assisted make-ready, including roller gap adjustment Sound Hood Digital Counter LCV-54 shingle delivery. Folding configuration: 6 Buckle plates in first station Electronic knife fold 2 x side buckle plates under knife Specification: Sheet size, Max: 558 x 850 mm Min: 128 x 148 mm Nodpsz Akl Hjfx Abysdc Pile height, Max: 740 mm Prod. speed, Max: 42,000 sheets/hr. (A4 parallel fold).

Condition: good (used), mileage: 195,250 km, power: 84 kW (114.21 HP), first registration: 06/2018, fuel type: diesel, tire size: 235/65R6, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, total length: 7,170 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 4,360 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, Bluetooth, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric Njdpfx Abj Adzu Eoyodc = Notes = Configuration: 4x2, Payload: 1303 kg, Unladen weight: 2197 kg, Gross vehicle weight: 3500 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2000 kg, Type of cab: Single cab, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Color: White, Maintenance manual, Lighting type: Halogen lamp, Bluetooth, Engine power: 84 kW (113 hp), Number of cylinders: 4, Engine displacement: 2143 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Workshop equipment, Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, L3H2 Courier Post-NL Maxi Automatic Euro6 Maintenance History Sidebars!, Tire type: All-season tires = Additional Information = General information Number of doors: 1 License plate: V-531-PJ Axle configuration Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire size: 235/65R6; Tire tread depth left: 8 mm; Tire tread depth right: 6 mm Axle 2: Tire size: 235/65R16; Tire tread depth left: 8 mm; Tire tread depth right: 3 mm Weights Unladen weight: 2,197 kg Payload: 1,303 kg GVW: 3,500 kg Functional Loading area height: 61 cm Maintenance APK (Technical Inspection): valid until 06/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2

Condition: excellent (used), Year of construction: 2020, Ref:11142 . 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Nodpfx Abszyu Uyeysdc Specification:

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. Ndsdpfjz Ek S Aox Abyjc A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.