Hor+Vert profilemachines, section bending rolls & seam makingmachines

Ercolina CE40H3

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Njdsw Hx Tvopfx Aghewp Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: used, Year of construction: 1997, tube diameter 60 mm wall strength 6 mm bending radius min. 180 mm total power requirement 5,5 kW weight of the machine ca. 1300 t dimensions of the machine ca. 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Nwjdpfx Aget I D Uxehjp Mandrel is no longer available, can be retrofitted

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller - working position horizontal and vertical (optional) - digital readout - shafts are supported by conical bearings Nsdpfjdktnvjx Aghewp - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm - weight: 85 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Nwjdpfx Agsg Eglpjhop Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: new, Ring roller machine with spindle Nodpsuudhfofx Aghowp

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power Nwodjidlpijpfx Aghep • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: new, Year of construction: 2025, power: 1.5 kW (2.04 HP), Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Nodpfx Agehvu Hyohowp Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2003, Offer 24365 Technical data: - Bending performance tube at 45 kg/mm² up to Ø 60 X 4 mm - Solid material up to 45 mm Nwodpfjwq I Epjx Aghjp - Bending angle 0 - 180° - Largest median bending radius Rm 171 mm - Smallest inner bending radius Ri 10 mm - Drive 400 V / 4 kW - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with preselection of bending angle - Digital bending angle display + fine adjustment of bending angle - Manual pipe twisting device - Bending tools 22 R 67 mm, 25 R 82 mm, 35 R 110 mm - Flat steel bending attachment

Year of construction: 2025, condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials • Hand wheel drive for the carriage • Pneumatic stop clamping with high holding power Nwedpfx Aoidmp Toghep • digital actual length display in the working area • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Year of construction: 2015, condition: used, Dimensions (L/W/H) 700x655x1400 mm Filter capacity / m² Njdpfogr Rkxox Aghswp Number of filters 1 St. Number of dust containers 1 St. Weight 140 kg