Used Recoiler Mandrel for sale (462)

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Dkjdeib D H Rjpfx Ab Aew Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: excellent (used), Various new honing stones, honing mandrels, guide shoes, and Sunnen accessories. Dsdpfx Aoigvrajb Aekw Used Sunnen honing mandrels, PG800-EM.

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Dedpfx Ajihf Tpsb Askw Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 053 389 601, Offered for sale is an extrusion tool for PVC, used in the manufacture of PVC pipes. Pipe diameter range, min.: Ø63 mm Pipe diameter range, max.: Ø160 mm Output: approx. 750 kg/h Design: Mandrel carrier system designed for PVC melts, completely made of 1.2316 Flow contour polished Equipped with cylinder heaters and thermocouple M14x1.5, type “J” Includes 3 m connection cable, without plug connector for the extruder Dksdpfx Ajzhuqkjb Asw Technical data: 230V, 50Hz for max. 3600W per zone, 16A Number of heating zones: 6 Two copies of the operating manual, in German or English, are included in the scope of supply.

Condition: good (used), amount 1 Palette Set of milling and lathe accessories, primarily Deckel-compatible tool holders, arbors, clamping accessories, and gears. -> SK/ISO-style tool holders — various lengths, some with clamping nuts, others with a through-hole for drive pins. -> Special Deckel tool holders — one holder is even labeled “Model Deckel.” -> Cylindrical collet holders — several sizes, neatly sorted in a red holder. -> Reducing sleeves — for adapting different tool shanks. -> Threaded adapters — short, thick adapter pieces with internal threads. Dkodpfx Ajzhcgajb Asw -> Toothed drive shafts — several pieces, some with hex heads, some with longitudinal teeth. -> Arbors / milling mandrels — longer shafts with a pin or collar, typically used for milling cutters or disc tools. -> Short centering or guide pins — small cylindrical parts with threads or a press fit. -> Red tool holder block — for six collet holders. -> Green-red machine module — presumably part of a top milling machine (e.g., angle head or accessory holder). Complete package price

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. Djdpfxjzi Stre Ab Ajkw The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: V00311, bending radius (max.): 135 mm, working height: 1,100 mm, workpiece weight (max.): 2,500 kg, tool diameter: 60 mm, No minimum price – guaranteed sale to the highest bidder! Due to inquiries, the auction has been extended by a few days! TECHNICAL DETAILS Workpiece weight (max.): 2,500 kg Bending capacity: 63 x 4 mm Usable length for bending with physical tube stop: 3,000 mm Working height: 1,100 mm Tool diameter: 60 mm Maximum bending radius: 135 mm MACHINE DETAILS Voltage: 400 V ±10 % Voltage deviation: max. -15 % for 1 minute Frequency: 47-63 Hz Installed power NC1: 9.70 kW Installed power NC2: 9.88 kW Rated current: 31 A Auxiliary voltage: 24 V DC CNC voltage: 24 V DC Dkodpey Sma Uefx Ab Asw Protection class, electrical: IP55 Dimensions (L x W x H): 4,581 x 1,093 x 1,372 mm EQUIPMENT OD21.3 x 3.2 mm CLR2.5D (bending tool, clamping jaw, die, pressure strip, and POB clamp) OD25 x 3 mm CLR2.5D (bending tool, clamping jaw, die, pressure strip, and POB clamp) OD26.9 x 2.5 mm CLR2.5D (bending tool, clamping jaw, die, pressure strip, mandrel, and POB clamp)

Condition: good (used), Year of construction: 1974, Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: NEHER, manual spindle press type SPPG-40/100 -Pressure: max. 40,000 kg -Stroke: 600 mm -Intermediate dimension: 715 mm Dkedpfx Aboypvtke Asw -Spindle mount: Ø 40 mm -Table size: 1100 x 600 mm, groove width mm -Table bore: Ø 120 mm -Dimensions: 1800/1800/H2400 mm -Weight: 1940 kg

Year of construction: 2007, condition: good (used), Manual feed solid product packaging/bagging machine. Dsdpfx Abey Ug I Re Ajkw For heat-sealable bags made of barrier material, GAS 35-40 microns; PA-PE 40 microns; Biaxially Oriented Polypropylene 25 microns. Packaging area dimensions: Height: 0 - 95mm Length: 50mm (minimum) Width: 30 - 300mm Coil dimensions: Outer diameter: 300/350mm Mandrel diameter: 70mm Maximum width: 60/600mm Machine dimensions: 3300 x 1100 x h1540mm With LINX model 4900 ink jet printer. DOCUMENTATION AVAILABLE Ref: SSM-004X

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 166 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2550 H Vibratory Plate – NEW | 25 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B20 with 3.1 kW Item No.: 5000610036 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 2550 H Condition: NEW Operating Weight: 166 kg Frequency: 90 Hz Centrifugal Force: 25 kN Working Width: 500 mm Engine: Hatz 1B20 Diesel Engine Engine Power: 3.1 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium-heavy duty Surface Capacity: approx. 624 m²/h Highlights & Features: - Compact diesel vibratory plate for versatile applications - Robust construction – ideal for daily site use - 500 mm working width – high surface capacity in a compact design - Ergonomic guide bar – low-vibration & comfortable - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Fields of Application: ✓ Paving construction & medium-sized surface areas ✓ Landscaping & gardening ✓ Municipal works & construction companies ✓ Fiber optic & cable installation ✓ Compaction tasks on small to mid-sized sites Options: Available at extra cost only in combination with machine: Dsdpfx Abjzh D R Tj Askw - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals, and emissions. Data is transmitted wirelessly to the Wacker Neuson app and clearly displayed. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany & internationally upon request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded Further models and sizes available! Also in stock: DPU 3050, DPU 3750 and more ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2550 H NEW | Diesel Vibratory Plate 25 kN | 500 mm Vibratory Plate | Hatz Engine | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Construction Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! Upon request, we are happy to offer you a virtual machine inspection via video call.

Condition: new, functionality: fully functional, power: 4.2 kW (5.71 HP), fuel type: diesel, color: yellow, operation weight: 247 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 3750 Hts Vibratory Plate NEW Wacker Neuson DPU 3750 Hts Vibratory Plate – NEW | 37 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Item number: 5000610321 Technical Data: Manufacturer: Wacker Neuson Model: DPU 3750 Hts Condition: NEW Operating Weight: 247 kg Frequency: 90 Hz Centrifugal Force: 37 kN Working Width: 500 mm Engine: Hatz 1B30 Diesel Engine Engine Power: 4.2 kW Fuel: Diesel Starting System: Recoil Starter Compaction Class: Medium compaction Surface Performance: approx. 624 m²/h Highlights & Features: - Powerful diesel vibratory plate for demanding compaction tasks - Robust design – ideal for daily construction site use - 500 mm working width – high area performance with a compact design - Ergonomic guide handle – low-vibration & comfortable - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-sized areas ✓ Landscaping & horticulture ✓ Municipal works & construction companies ✓ Fiber optic & cable installation ✓ Compaction work on small to medium-sized construction sites Dsdpfozh Ed Ujx Ab Ajkw Options: Additional charges only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals, and emissions. The data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (District Wesel) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models and sizes available! DPU 5247 etc. also in stock ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson vibratory plate | DPU 3750 Hts NEW | Diesel vibratory plate 37 kN | Vibrating plate 500 mm working width | Hatz engine | Wacker Neuson compaction technology | Vibratory plate for paving Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Djdpfszichajx Ab Aekw Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Year of construction: 2026, condition: new, functionality: fully functional, Precise, ergonomic lifting and lowering. The transfer height from mandrel to mandrel never matches unless you use the TECHlift S. Millimeter-precise vertical positioning of the roll in the production process. Ergonomically beneficial and back-friendly. Time-saving and environmentally friendly. Dkodpfezt R H Sjx Ab Aew

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler Dkodpfxszix Ats Ab Ajw

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 38 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 2 mm, bending radius (min.): 60 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,500 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, USB port, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Dksdpfxo Adp Uye Ab Aow Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: excellent (used), Weinig precision setting gauge Mandrel – 50 mm Dkodpfx Aszw Ngfeb Aow

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Max. saw blade diameter: 350 mm Continuously adjustable feed rate Automatic lubrication system Anti-recoil protection Culaga Dust extraction port: 200 Safety switch Power supply: 380 V Main motor power: 25 kW Overall dimensions: Length: 1730 mm Width: 1490 mm Dkodpfxozzbfze Ab Asw Height: 1440 mm

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Djdpfsrtrlzjx Ab Aekw Stack Light

Condition: new, Description: Sharpening machine for chisels and hand tools The ISELI sharpening machine for hand tools type FL consists of the high-quality basic motor, the sharpening unit on the left mounting flange and the grinding wheel or buffing wheel on the right side of the motor equipped with an extension mandrel. Ideal areas of application: Sharpening / regrinding hand plane irons and chisels for manual woodworking in commercial carpentry shops, wood processing companies or in training centers Dry sharpening principle that has been tried and tested thousands of times: thread-free, burr-free grinding in 30 seconds Time-consuming sharpening of the cutting edge is no longer necessary. This saves time and efficiency Dry grinding and yet no burnt-out cutting edges Effortless clamping and unclamping of the tools Djdpfevwghdjx Ab Aokw Even trainees or unskilled workers can operate this machine - easily and masterfully Cutting angle adjustment according to scale Side grinding of the cutting edges in the same clamping Tool support with 3-way adjustable stop Built-in temperature switch in motor winding, for 230V 1Ph version Very powerful grinding motor (0.95 HP at 380 V. 3 Ph) Technical data: Operating voltage 400V, 3Ph, 50 Hz On-site fuse 16 A Power 0.55 kW Protection class IP 44 Speed 2800 1/min Scope of delivery: - 1 set of grinding inserts (1 piece 15/20/30/40/50/60 mm) - 1 pot & 1 tool grinding wheel - 1 instruction manual

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 44 kW (59.82 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 48 mm/s, pressure: 150 bar, wall thickness: 3 mm, working length: 3,600 mm, Equipment: documentation/manual, 76x3mm Fully Automatic Cnc Tube Bending Machine The "Griffin" tube bending machines are hybrid structures. This type of tube benders includes hydraulic and pneumatic for clamping operations. Bending, feeding, rotation, stack changer and tube aligment operations working with servo engine. Flexible bending and working capacity with CNC control system. The capacity to adjust molds in 3 different radius scales Ability to automatically convert 3D technical drawings to bending program Multivariable roll bending system Ability to work with or without a mandrel Automatic oil cooling system With linear guideway systems minimize the system gaps in moving parts Program changing feature while in the bending process ETU bending simulation program, for bending process, helps to make 3d tube bending arising from the coordinates, with excellent results. With DcOnTool tool, you can convert X, Y, Z coordinates to bending program (Y,B,C) Can review the last error messages with Dlog Its user-friendly, easy, knowledgeable and quick-to-learn design allows you to start the project quickly. Easy to use with 17 inch computer. The vibration-free structure shall help your work. Unlimited program saving and changing Turkish – English and French language 10 years sending spare parts Dkodpfx Absvwg H Hs Asw

Condition: new, machine/vehicle number: 7-CL1200, The new CL 1200 commercial copy lathe from Holzprofi is characterized by its extreme stability and ease of use. 100% Made in EU (developed, built, quality-tested) Standard equipment: Drill chuck ø 16 mm, mandrel MK2 with external taper ø 16 mm, Live center punch ø 20 mm, Live center punch ø 40 mm, Four-prong driver ø 20 mm, Four-prong driver ø 40 mm, bung chuck ø 40 mm, Clamping disk ø 200 mm, copy chisel 16x16 mm, Hand rest, protective screen, clamping lever, ejector, Drill holder (for longitudinal milling of grooves). incl. fixed steady rest Technical data: Center width 1200 mm Center height 215 mm Spindle thread M33 DIN800 Spindle taper MK2 Tailstock taper MK2 Quill travel 140 mm Drill chuck 16 mm Dodpevw Eaxsfx Ab Askw Spindle speeds 500/1000/2000/2800 Motor output S6 1.5 kW (1.1 kW S1) Weight 395 kg Optional accessories: Traveling steady rest Stepless speed control

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet Dkedpfov Rmvzsx Ab Aow - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Dkedpfx Asv Rpnmeb Asw Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: new, neu ca. 12 Wochen ab Auftrags Dedpfx Aewv H Awob Aokw Türkei 10900 € 209.28 € 1250 kg 1300 mm 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: used, SLITTING LINE GEORG 1500x1.5x25 Main technical data Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1850 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn 2 Slitting heads PLC: Siemens S7 1200 Cutting capacity: number of cuts with 350 MPa 24 cuts for thickness 0.25 mm 28 cuts for thickness 0.50 mm 21 cuts for thickness 0.75 mm 18 cuts for thickness 1.00 mm 15 cuts for thickness 1.25 mm Dedpfx Asxl R A Rob Aekw 12 cuts for thickness 1.50 mm Scope of supply 1. Coil Carriage 2. Uncoiler 3. Guiding system with 2 measured edges 4. 203.2 diam. Pinch roll before shear 5. Double interlock table 6. Slitting shear:Shaft diameter: 160 mm 7. 1 off line quick change slitting head available 8. Scrap press and conveyor 9. Intermediate coil table 10. Loop Pit and covering tables 11. Strips Braking Unit 12. Motorised recoiler with hold down separator arm 13. Unloading Coil Car 14. 4 arms turnstile 15. Electrical cabinets & Control panels 16. Existing tooling 17. Existing documentation Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1800 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn Slitting heads: 2 PLC: Siemens S7 1200 For thickness 0.25 mm: 24 cuts with 350 MPa For thickness 0.50 mm: 28 cuts with 350 MPa For thickness 0.75 mm: 21 cuts with 350 MPa For thickness 1.00 mm: 18 cuts with 350 MPa For thickness 1.25 mm: 15 cuts with 350 MPa For thickness 1.50 mm: 12 cuts with 350 MPa