Used Rapida 104 for sale (834)

Condition: ready for operation (used), Veneer Lathe manufactured by Rau-te in Finland. Type 104" Dimension veneer sheets: Length 2.62 m. Minimum width 0.5 meter Infeed loading system included. Tjdozy Ui Depfx Akisd There is also a complete out feed system included ofter the Veneer lathe with acceleration conveyor, veneer cutting knife and veneer stacker. A second veneer lathe Raute 66” is also available with in- and out feed system. Dimension veneer sheets: Length 1.00 m to 1.65 m. Minimum width 0.5 meter

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm Tsdpfx Aowabbvekiod The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Condition: used, Year of construction: 1995, table-size Breite: 800 mm Todpfowp Tuyex Akiod table-size Tiefe: 350 mm Dimensions (L/W/H) 4600 x 3200 x 2500 mm weight of the machine ca. 4,5 t

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: B6.01122.2949, total width: 2,000 mm, total length: 850 mm, total height: 1,400 mm, pressure: 460 bar, operating pressure: 460 bar, type of input current: three-phase, overall weight: 1,698 kg, rotational speed (max.): 1,800 rpm, power: 0.089 kW (0.12 HP), Hammelmann HDP 122 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 460 bar Delivery rate: 104 l/min. Drive speed: 1800 rpm. Drive power: 89 kW with ACM 315 S-4/PHE electric motor 110 kW, IP55 with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2,000x850x1,140 mm Weight: approx. 1,698 kg Tedpfx Aeqhnrhokisd Year of construction: 2016 Condition: In very good used condition. 2 pieces available.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: Todsrnkwrjpfx Akied - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: Tjdpfezughbox Akijd - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96

Condition: used, KEB 104 kVA, AC motor 75 kW, Art. No. 23.F4.F1U-4R01, frequency inverter 0-1600 Hz EMC filter 180A, 0...528V UL 480V 150A Todjd A Ndfepfx Akied Ambient 3K3, Mat. No. 23E4T60-1001 Line H1R1A14 International shipping available upon request!

Condition: excellent (used), Year of construction: 2005, Excellent technical condition, recently serviced. Cutting length: 6000 mm Tjdpfx Akszr Icneiod Saw blades: 420 mm E550 control system Vertical pneumatic clamping Cutting based on external dimensions, without adjustment Pneumatic angle adjustment from 45 to 90 degrees Cooling system installed Digital angle indicator Saw blade guards that automatically lower and raise.

Condition: used, Year of construction: 2008, Trepko 104 KSP – Filling & Closing Machine (Year 2008) Well-maintained Trepko 104 KSP inline filling and closing machine, suitable for butter, margarine, spreads, dairy products, and similar applications. Specifications: - Model: Trepko 104 KSP - Serial No.: 3702 - Year: 2008 - Capacity: Up to approx. 200 cups/min (4 lanes, 50 cycles/min) - Filling System: Servo-driven piston filler for high dosing accuracy - Closing System: Foil heat sealing + option for snap-on plastic lids - Construction: Stainless steel, hygienic design Tsdpfx Ajx A Er Iskiod Documentation: - EC Declaration of Conformity - Pneumatic schematics - Manuals included Key Features: - Fully automatic inline operation - Quick format and product changeover - Reliable and robust machine design - Suitable for dairy and food production - Machine has been out of operation for the last two years - Good technical condition, available for immediate sale. Location: Denmark Filling volume: 200, 250, 400, & 500 grams.

Year of construction: 2008, condition: used, Year: 2008 Condition: Functional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit Tsdpfxjy H Hgde Akied - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Year of construction: 2024, condition: used, Applications and use: The separator is best suited when a light excavator needs to handle heavy, stubborn materials. It is derived from the wider TSC.154 and features the same drive and bearing assembly, resulting in increased power output on a smaller screening surface. The built-in star discs are 5 mm thicker than the standard discs and are additionally fitted with welded-on wear protection. The disc separation gap is 20 mm, resulting in a screened particle size of 0-25/30 mm, ideal for producing backfill material. Price does not include the mounting plate. Adapters for excavators can also be custom fabricated and supplied upon request. Price on request. For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 30 - 45 m³/hr Tjdow Rkxqspfx Akiod Leak oil connection required: no

Condition: good (used), Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Pallet racking: boltless racking, heavy-duty racking / 34 uprights and 104 crossbeams -Stand depth: 1100 mm -Stand height 4100 mm: 2 pieces -Stand height 3500 mm: 13 pieces -Stand height 2000 mm: 19 pieces Tsdox Ikirjpfx Akijd -Crossbeams, length 2760 mm: 93 pieces -Crossbeams, length 1890 mm: 11 pieces -Dimensions/Quantity: see photo parts list -Submission/Price: complete -Transport dimensions: 6950/2250/H1460 mm Total weight: 4380 kg

Condition: used, Year of construction: 2004, x-travel 1040 mm y-travel 600 mm z-travel 500 mm feed 30 m/min control Siemens type 840 D table surface area 1250x600 mm table load 800 kg Tedpszdcb Rofx Akisd Tool changer 30 Fach spindle taper ISO SK 40 turning speeds 12000 U/min total power requirement 24 kvA weight of the machine ca. 8,8 t dimensions of the machine ca. . m Chip Conveyor Quick-Clamping System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min Tsdpfx Akjz D Aqueisd rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Tedpfx Ajt I Di Aekied Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: ready for operation (used), Year of construction: 1996, KBA 104-5P, Auto wash, auto plate, IR dryer, 1996 year Format: max - 72x104 cm min - 28x42 cm max speed 15000 per hour weight approx 49 tons Tsdpfsyi T Ncsx Akiod dimensions 11x4.3x2.3 m

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Tsdpfxoy Raime Akijd Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: excellent (used), Beveling Machine Stock Number: 9283 Manufacturer: Trumpf Year of Manufacture: Todewfzzmspfx Akisd Type: 104-0 Machine Number: Max. bevel length (infinitely adjustable): Mild steel at 400 N/mm²: 10 mm Mild steel at 600 N/mm²: 8 mm Mild steel at 800 N/mm²: 5 mm Working Speed: 2 m/min Rated Power: 2 kW Stroke Rate at Rated Load: 370 / min Material Thicknesses Min/Max: 3 / 25 mm Weight: 16.5 kg

Condition: used, Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, hydraulic tensioner, swing clamp, hydraulic swing clamp -Hydraulic clamp: Hydraulic swivel clamps 11 pieces -Swivel clamp: Römheld 1885-104 -Three-way valves: Hawe DZ3-1R -Price/tax: complete Tsdpjqfkkmjfx Akijd -Dimensions: 220/65/H165 mm / 100/100/H100 mm -Transport dimensions: 560/370/H160 mm -Weight: 64 kg

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input current: 370 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2026, continuous power: 200 kW (271.92 HP), Equipment: type plate available, Exact model designation: Control Techniques Unidrive M000-104 03200 EU0 Output power and output current: 200kW | 361A Tedpszrc Dyjfx Akiod ° Includes inspection seal! ° Easy operation via integrated control panel ° Quick parameterization possible ° Original operating manual for commissioning included Only 1 unit left in stock! This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.

Condition: used, Letter Press Zylidner DIE Cutter Johannisberg 104 Buchdruckzylinder / Letter Press Zylidner DIE Cutter Johannisberg 104 Year 1966 - Serial-No. 2153801 Size min. 360 x 520mm - max. 720 x 1020mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Tjdpfx Aeycrz Dokijd On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Tedpoig T Amsfx Akied Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: good (used), mileage: 205,477 km, power: 206 kW (280.08 HP), gearing type: automatic, fuel type: diesel, color: yellow, axle configuration: 4x4, first registration: 12/2008, mast type: telescopic, Equipment: all wheel drive, cabin, - Rear work lights - Front work lights - Windshield - Steering assist - Rotating beacon - Auxiliary heating system - Central lubrication system General Information Year of manufacture: 2008 Operating hours: 10,350 Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Drive: Wheel drive Dimensions Dimensions (L x W x H): 1100 x 259 x 360 cm Weights Unladen weight: 23,800 kg Payload: 200 kg GVW: 24,000 kg Functional Lifting capacity: 40,000 kg Superstructure brand: LIEBHERR LTM 1040 2.1 CE marking: yes Condition Technical condition: good Optical condition: good Financial Information Price: On request LIEBHERR LTM 1040-2.1 UTM 725 – 40 TON MOBILE CRANE – 35 METER TELESCOPIC BOOM – FULL BALLAST – YEAR OF MANUFACTURE 2008 LIEBHERR LTM 1040-2.1 UTM 725 – 2-AXLE ALL-TERRAIN MOBILE CRANE – 40 TON LIFTING CAPACITY – 35 METER TELESCOPIC BOOM – ORIGINAL PAINT – MICHELIN TIRES – FULLY BALLASTED GENERAL VEHICLE DATA - Manufacturer: Liebherr Tsdpfx Ae Afm Eljkisd - Type: LTM 1040-2.1 - Model: UTM 725 - Year of manufacture: 2008 - First registration: 11.12.2008 - Mileage: 205,700 km - Operating hours (upper carriage): 10,350 hours - Maximum lifting capacity: 40,000 kg - Number of axles: 2 - Drive: 4×4×4 - Specified unladen weight: 23,800 kg - Tires: Michelin 16.00 R25 XGC - Color: Original paint - Counterweight: Full ballast - Location: Geurts Trucks BV – Andelst, Netherlands DETAILED TECHNICAL DESCRIPTION This Liebherr LTM 1040-2.1 is a compact and powerful 2-axle all-terrain mobile crane with a maximum lifting capacity of 40 tons. The mobile crane features a hydraulically extendable main boom with a maximum length of 35 meters. Thanks to its compact design, all-wheel drive and all-wheel steering, this Liebherr is ideally suited for crane work on construction sites, industrial plants and locations with limited space. Special features: - Maximum lifting capacity 40 tons - 35-meter hydraulic telescopic boom - 2-axle all-terrain design - 4×4 all-wheel drive - All-wheel steering - Complete ballast package - Hydraulic four-point outrigger system - Original paint - Michelin 16.00 R25 XGC tires - Compact design and excellent maneuverability TELESCOPIC BOOM – BOOM LENGTHS AND DIMENSIONS The Liebherr LTM 1040-2.1 features a four-section hydraulic telescopic boom, consisting of a basic boom and three telescopic boom sections. | Description | Boom length | | ----- | ----- | | Base boom retracted | 10.50 m | | Telescopic position | 15.40 m | | Telescopic position | 20.30 m | | Telescopic position | 25.20 m | | Telescopic position | 30.10 m | | Telescopic position | 32.60 m | | Maximum extended main boom | 35.00 m | The various telescopic positions enable flexible use for different lifting heights and outreach. ...

Condition: good (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Powder Spray Removal Device Tjdjrp D I Iopfx Akisd Automatic Stacker S-3 Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: good (used), Gear motor, offset gear motor, electric motor, three-phase motor, electric gear motor Tsdpfxed S Spas Akied -Speed: 104 rpm -Power: 4 kW -Motor type: SK 112M/4 -Construction: B3/B5 -Shaft: Ø 30 x 70 mm -Protection class: IP 55 -Dimensions: 550/285/H260 mm -Weight: 49 kg