Used Woodturning Lathes for sale (5,321)

Condition: good (used), Lathe Length: 1750 mm Motor power: 3 kW Voltage: 380 volts Lodpfxji Akv Sj Apmsad Location: available from warehouse 54634 Bitburg - immediately available -

Year of construction: 1985, condition: used, Distance between centers: 1200 mm Lajdpfxjy A Hiqe Apmsd Copying attachment: Yes Motor power: 1.5 kW Speed: 870 / 1400 / 2100 rpm

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a HAGER HDG 250 lathe in mint condition with a center width of 1,000 mm. The exhibition machine is in original condition, therefore you have the full warranty. Technical data - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) safety groove - Spindle bore (diam.) 20 mm - Tailstock quill 150 mm / MK3 -Hand rest upper section 300 mm -Weight 270 kg -Length x width 1,800 x 640 mm - Motor 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, lathe machine, lathe, lathe, woodturning, woodturning machine, turning, woodturning knife, turning, machine, Hager Reference: R-A0117 Ljdjtpnykjpfx Apmsad

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE 300 lathe with a motor output of 3 HP. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Center height 300 mm - Center width 1,000 mm (extendable*) - Electronic speed control (100-450 / 300-1,100 / 750-2,700 rpm) - Hollow spindle D = 20 mm with inner cone MK3 - Quill travel 150 mm - Motor 3 HP / 400 V - Weight 276 kg Laedpotpnu Rjfx Apmed The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: like new (used), DEMONSTRATION MACHINE A Stratos XL demonstration lathe with a center height of 280 mm is for sale. The lathe was only used for a short time for demonstration purposes at Hödnerhof. It can therefore be described as as good as new with full guarantee / warranty. Technical data: Ljdeu Szr Ujpfx Apmjad - Center height 280 mm - Turning diameter above the bed: 550 mm with optional additional bed (external turning device) up to 1,000 mm! - Center width approx. 780 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock with MK2 cone - Frequency converter (3 belt stages): Stage 1: 60 - 1,200 rpm | Stage 2: 100 - 2,200 rpm | Stage 3: 150 - 3,700 rpm - Quill travel 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor 2.2 kW / 3 HP - Weight approx. 320 kg The machine is located at Hödnerhof in A-6341 Ebbs. Subject to prior sale! Pick up address: Hödnerhof Blumenwelt Eichelwang 2 A-6341 Ebbs Related terms: woodturning machine, lathe, lathe, lathe, woodturning, woodturning knife, wood turning, turning, machine Reference: DDSTRATOSXL-VH

Condition: excellent (used), Year of construction: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 lathe with a center height of 250 mm. The machine was used in our in-house lathe courses, is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Center height 250 mm Lsdpfx Ajrtqi Ijpmsad - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) drain safety groove - Spindle bore (diameter) 20 mm - Tailstock quill 150 mm / MK3 - Hand rest upper part 300 mm - Weight 270 kg - Length x width 1,800 x 640 mm - Motor 2.2 kW (3 HP) - Speed 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, woodturning bench, turning, woodturning knife, woodturning, turning, machine Reference: DH25500-K

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 112902, Title: Intorex CNI 1500 CNC Control Lathe - 2015 Model Description: Experience precision engineering at its finest with the Intorex CNI 1500 CNC Control Lathe, a powerhouse of machining. Manufactured in 2015, this machine embodies reliability, accuracy, and efficiency, making it an ideal addition to any workshop or manufacturing facility. Key Features: Year of Manufacture: 2015 Brand: Intorex Model: CNI 1500 Control: CNC Control Max. Turning Diameter: 300mm Diameter Max. Turning Length: 1500mm Inc. Drawing and programming Software IntorEDIT (easy to use) Additional Features: Adjustable Tailstock (12 & 18mm), Round steady (90mm Dia & 140mm Dia), 2 pneumatic centerers Lajdpfx Aer Tiukjpmjd to facilitate the loading of the pieces Applications: Ideal for precision turning operations in Woodworking / Joinery Reason for Selling: Upgrading to newer equipment. Comes with rolling cabinet for accessories and tooling

Condition: used, functionality: fully functional, Hempel P9 cylindrical grinding machine for turned parts Lajdpfx Aozlcvpepmsd Working length 900 mm Maximum grinding diameter 100 mm Grinding performed using oscillating brushes

Condition: good (used), Code: 0410 Brand: CMC - ITALY Model: LT 1500 Lathe with copying device for wood and similar materials Technical specifications: Max centre distance 1500 mm Centre height 240 mm Max working diameter (without copying device) 450 mm Copying device with manual handwheel feed Gouge rest Tailstock Spindle speed rpm 600/1000/1500/2000 Motor power 1,5 Hp three-phase Overall dimensions mm 2430 x 730 x 1230 h Weight kg 340 Laodpfx Aezc Rmljpmjd

Condition: excellent (used), !!!DEMO MACHINE!!! For sale: a Drechselmeister MIDI 2 Plus lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Lasdpfx Apjzgr Sismsd Technical data: - Center height approx. 178 mm / Swing diameter 355 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 RPM - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) safety groove - Tailstock with interchangeable tailstock spindle 100 mm MK2, trapezoidal thread, and measuring scale! (Optional: interchangeable tailstock spindle with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, turning tool, woodturning, turning, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister MIDI 3 lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our specialist personnel. (Fully functional) Technical data: - Center height 190 mm / Turning diameter approx. 378 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) drain safety groove - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread, and scale! (Optional: Interchangeable quill with ER25 collet chuck system for drilling) - Motor 0.7 kW / 1 HP (230 V) with high-quality frequency inverter and “SAFE-START” function - Weight approx. 60 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Lodpfszgr Nujx Apmsad Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, lathe tools, woodturning, machining, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister Twister XL lathe with a center distance of approximately 800 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical data: - Center height 250 mm - Swing over bed 490 mm (up to 900 mm with optional external turning attachment!) - Center distance approx. 800 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper MK2 - Frequency inverter (2 belt stages) 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale) and trapezoidal lead screw - Motor 1.5 kW / 2 HP - Weight approx. 290 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, lathe machine, wood lathe, turning, lathe tools, wood turning, turning, machine Laedpjzgr Hgjfx Apmod Reference: R-D1618

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Automatic lathe for turning square stock Hydraulic pump motor with a power of 1.5 kW Ljdpfx Apszgc Rcjmjad Maximum length of square stock: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two tool posts with profiling tools 1 front spindle for drilling or front profiling 1 roughing tool Machine weight: approximately 1800 kg CE marking

Condition: good (used), Code: 0396 Brand: EINHELL Model: TC - WW 1000 Ledpfezaa Adsx Apmsad Wood lathe Technical specifications: Power supply 220 Volt Centre distance 1000 mm Turning diameter 280 mm Motor power 350 W N° 4 speeds (890/1260/1760/2600 rpm) Backing pad Tailstock Overall dimensions mm 1500 x 200 x 350 h Weight kg 23

Condition: good (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 090977 / 280777, Oma brand woodturning lathe sanding machine, model 120/A, serial number 090977, used. Laedpszkqxvjfx Apmod Oma brand woodturning lathe sanding machine, model Cosbo 120, serial number 280777, used.

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1069, quill travel distance: 1,300 mm, turning diameter over cross slide: 600 mm, total width: 400 mm, total length: 2,300 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, Wood lathe/turning lathe from 1979 by Jos. Ackermann. Fully functional and in good condition, suitable for series production. Not in use for several years. It is located in the workshop of a medium-sized family business in the Augsburg area. Ledowhlc Hjpfx Apmead If you are interested or would like more information, please call. Please contact us using the inquiry form here. Utz Carpentry

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a TEKNATOOL Nova Nebula 230 DVR woodturning lathe with a direct drive ranging from 50 to 4,000 rpm. The demonstration machine is in excellent condition. Technical specifications: - Center height: approx. 230 mm - Maximum distance between centers: 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MT2 (Morse Taper 2) - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-position indexing system - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Lodpfxoy N R A Is Apmjad Forwarding delivery: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related keywords: woodturning lathe, lathe, turning machine, woodturner, woodturning, turning tools, wood spinning, turning, machine Reference: R-A0117

Condition: excellent (used), functionality: fully functional, OMA COSBO 120 Grinder for Turned Parts Lodpfxoy Elw Eo Apmoad Working length: 1200 mm Two grinding units Polishing brushes with oscillation Template-based operation

Condition: excellent (used), functionality: fully functional, Genini TBK 70 Automatic Lathe Output square 45×140 mm (approx. 10 pcs/min – 600 pcs/h, with 2 roughing tools – 1 finishing tool) Max. workpiece block: 70×70 mm Min. machinable block: 20×20 mm Laedpfx Apeyxqc Homed Max. machinable length: 300 mm Min. working length: 25 mm CE mark

Condition: excellent (used), Livio Macchia 08 LPT lathe part grinding machine Two grinding units Lodpfx Apjydn Amomoad Oscillating polishing brushes Template-guided operation

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder Lodpex Thw Dofx Apmjad CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: excellent (used), functionality: fully functional, Locatelli MK-CC 1200 Turning Center Turning length: 1200mm Automatic loading of stock material from a feeder 3 Duplomatic floating tool holders, guided by a template 3 upper tool holders with axial movement Laodjyxwpyepfx Apmsd Option for face drilling in the material Machine control system modernized in 2023 Excellent condition

Condition: repair required (used), functionality: not functional, Intorex TR90 lathe body. Lodey Uggtopfx Apmjad

Condition: excellent (used), DEMONSTRATION MACHINE!!! For sale is a Drechselmeister Stratos ECO wood lathe with a center distance of approx. 680 mm. The machine is in very good condition and has been refurbished and inspected by our qualified staff. (Fully functional) Technical specifications: - Center height approx. 230 mm - Swing over bed approx. 455 mm (up to 800 mm with optional outboard turning device!) - Center distance approx. 680 mm (expandable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Spindle speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight: 177 kg Laodpoy Nm Rhjfx Apmod The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: wood turning lathe, metal lathe, lathe, wood lathe, turning, woodturning tools, woodturning, turning machine Reference: R-D1618

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli OMK300 + UF 150/220 Lsdpfx Apoy R T N Tjmoad Turning length: 300 mm Maximum square bar: 100x100 mm Minimum square bar: 20x20 mm Copy turning operation Drilling transfer UF 150/220