Used Rapida 104 for sale (844)

Condition: ready for operation (used), Bosch SD-B3.095.030-10.000 servo motor, SN:104-914810, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Djdji D E Tajpfx Af Uski

Condition: ready for operation (used), Bosch UVF 100M / 4B-12S / 643 / 3386668-1 servo motor SN: 104/914339, terminal box cover is missing and the connection is slightly damaged, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dodpfx Afoi D Hg Rj Ujki

Condition: good (used), Keyseating machine FRÖMAG RAPIDA 463 incl. indexing table - Keyway width producible: 3 - 63 mm - Maximum keyway length: 600 mm - Indexing table - For bores from 10 - 500 mm - Feed size: 0.01 - 0.25 mm - Cutting speed steplessly adjustable 2 - 22 meters/min - Return speed - constant 50 meters/min - Load capacity: 3000 kg - Connected load: 4.6 kW - Including work platform - Various broaching needles and corresponding accessories in the tool cabinet Dimensions: LxWxH (machine): 1.6x1.5x2.3 meters / weight 3500 kg Dedpfjx Tyx Hex Af Ujki Subject to errors and data entry mistakes.

Condition: good (used), Year of construction: 2014, only approx. 150 million impressions Equipped with: CX Package Logistics – with manual non-stop feeder FAPC (Fully Automatic Plate Change) Preset Ergotronic control console WallScreen display Colortronic ink metering Varidamp Lateral, circumferential, diagonal register control Dsdpfx Asx Sdn Aef Uoki Technotrans Beta c 220L (air-cooled) Ink temperature control CleanTronic Synchro – roller / blanket / impression cylinder wash DriveTronic feeder SIS (Sensoric Infeed System) Non-stop feeder – manual, not fully automatic Non-stop delivery with roll-on device Raised on a plinth (420mm) Ink agitators (UV) EES (Energy Efficient System) CleanTronic simultaneous blanket & impression cylinder wash CleanTronic UV – dedicated position for UV wash inside cabinet UV interdeck – 6 x UV cassettes, installable at any position UV interdeck – positions available at all 6 print units, drying towers, and 3 positions in the delivery Coating unit 1: Harris & Bruno aqueous and UV coating pumps with prep tanks (heated) Drying tower 1: VariDry IR/Hot Air dryer (plus interdeck position) Drying tower 2: VariDry IR/Hot Air dryer (plus interdeck position) Coating unit 2: Harris & Bruno aqueous and UV coating pumps with prep tanks (heated) DriveTronic SFC (Simultaneous Form Change) at coating units KBA VariDry IR/Hot Air/UV at end of press ALV3 extended delivery

Condition: good (used), Year of construction: 2012, Speed: up to 18,000 sheets/hour in straight printing up to 15,000 sheets/hour in perfecting mode Printing substrates: 0.04 - 0.7 mm in straight printing 0.04 - 0.6 mm in perfecting mode ErgoTronic Professional ColorTronic QualiTronic Color DensiTronic Professional DriveTronic feeder Non-stop operation SIS (Sheet Inspection System) Ant-Marking-Coat FAPC fully automatic plate changer Varidamp All washing units Inking unit temperature control Powder application unit Water-cooled machine Approx. 218 million impressions Dedpox R Shbefx Af Uoki

Condition: used, functionality: fully functional, mileage: 59,000 km, power: 102.97 kW (140.00 HP), fuel type: diesel, Year of construction: 2022, Automatic transmission, leather seats, multifunction steering wheel, front LED headlights, automatic climate control, rear sensors and reversing camera. Dkjdpfx Afexmr Abo Uji

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 744165, paper height (max.): 840 mm, KBA Rapida 75-4 offset press, format 510x735 mm, max. paper height 840 mm, 4 colors, 60 million impressions, year 2014, in very good condition, regularly serviced and maintained. Dkjdpfx Afexzhp Tj Uoi

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Dedpsrnkwrofx Af Ujki Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Condition: new, SSI Schäfer PR 600 Longitudinal beam 2700 mm Pallet racking beam with a clear width of 2700 mm for three Euro pallets per pair of beams next to each other. The traverse can be loaded with up to 2600 kg per pair of traverses. Suitable for pallet racking system PR 600. For quick adaptation of your shelving or easy replacement The longitudinal beams guarantee a force-fit and form-fit connection with the shelf supports With welded-on 5-hook suspension brackets Height-adjustable in the 50:50 mm system perforation grid As a replacement for damaged shelf beams and for extending existing shelving systems. Technical data: Manufacturer: SSI Schäfer Truss type: TRV1-270-104-30CE Truss length: 2700 mm Load capacity: 2600 kg per pair of trusses Height-adjustable at 50 mm intervals 5-hook suspension lugs Material: sheet steel Surface: painted Color: gentian blue RAL 5010 Profile: 100 x 40 mm Type: CE 100 Manufacturer order no., 334750 Scope of delivery 1 x longitudinal beam 2700 x 100 x 40 mm blue Suitable for almost all pallet racking with 50:50 mm system perforations e.g. Bito, Jungheinrich, Topregal, Meta, Lista, Dexion Dedpfx Ajwv Rrcof Ueki Further racks in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Dksdpfx Aferp D I Ij Uei Powder Spray Removal Device Automatic Stacker S-3 Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: excellent (used), jaw width: 103 mm jaw height: 37 mm span length: 175 mm place requirement: 600 x 180 x 150 mm Dkedpfx Afofgx R Uo Usi weight: 27 kg

Condition: used, Year of construction: 2002, Used machine Year of construction 2002 table size 580 x 280 mm Drilling table height 800 mm Drilling depth 150 mm Drilling length 225 mm with Wescott drill chuck 0-20 mm height adjustment 120 mm Swivel range drilling unit 2 x 45 ° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in handwheel with digital display with 2 speeds 1400 and 2800 rpm with drive unit Dkjdpfxew Naccj Af Uei LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: short term Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travel X: 1,040 mm Travel Y: 600 mm Travel Z: 500 mm Spindle speed: 12,000 rpm Spindle taper: SK 40 Tool magazine: 30 positions Internal coolant supply: 40 bar Clamping area: 1,250 x 600 mm Maximum table load: 800 kg EQUIPMENT - Chip conveyor - Spindle cooler - ICS (internal coolant supply) - Tool measurement Djdowtrb Hopfx Af Ujki - Documentation

Condition: used, Year of construction: 2001, stations 10 / 22 tool taper SK 40 control SIEMENS SIMATIC OP 3 total power requirement ca. 112 kW = transfer machine Dkodpfetqqlqjx Af Usi Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units; drilling and sinking 5 units; drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device

Condition: used, Year of construction: 1997, stations 10 / 22 tool taper SK 40 control SIEMENS SIMATIC OP 3 total power requirement ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units; drilling and sinking 3 units; drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Dodotqqlrjpfx Af Ueki Accessories.: chucks (without jaws), chip conveyor, coolant device

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: B6.01122.2949, total width: 2,000 mm, total length: 850 mm, total height: 1,400 mm, pressure: 460 bar, operating pressure: 460 bar, type of input current: three-phase, overall weight: 1,698 kg, rotational speed (max.): 1,800 rpm, power: 0.089 kW (0.12 HP), Hammelmann HDP 122 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 460 bar Delivery rate: 104 l/min. Drive speed: 1800 rpm. Drive power: 89 kW Dsdpfx Aeqhnrhef Uski with ACM 315 S-4/PHE electric motor 110 kW, IP55 with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2,000x850x1,140 mm Weight: approx. 1,698 kg Year of construction: 2016 Condition: In very good used condition. 2 pieces available.

Condition: good (used), Year of construction: 2003, Maho DMC 104 V, year of manufacture 2003, Heidenhain iTNC 530 control, travel X/Y/Z 1040/600/500 mm, 30-position tool changer, SK 40 spindle taper, high-pressure internal coolant 20 bar, direct measuring systems, belt filter, chip conveyor, 3D touch probe, X-axis bellows replaced. Dkjdow Dy S Iepfx Af Uoi

Condition: ready for operation (used), Separator mounted on a stainless steel frame, with feed pump, discharge pump, sludge pump, circulation tank, stainless steel pipes and valve, wired with control box. For the purification of contaminated water. Large water phase, small light phase and dirt phase. No emptying machine !!! Must be opened for cleaning. Time: approx. 5 min. Ready for immediate use. Dksdpfoqzxzgex Af Uoi We are happy to answer further questions by e-mail!

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Djdpfet I Di Asx Af Ujki Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: ready for operation (used), Year of construction: 1996, KBA 104-5P, Auto wash, auto plate, IR dryer, 1996 year Format: Dodpfx Afeyi T Nce Ujki max - 72x104 cm min - 28x42 cm max speed 15000 per hour weight approx 49 tons dimensions 11x4.3x2.3 m

Year of construction: 1985, condition: good (used), Offer 22556 Technical data: Djdpfxoimdlrs Af Ujki - Saw blade diameter 420 mm - saw blade bore 30 mm - max. cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - cutting range see diagram enclosed - tilting range inwards manual 90 - 22,5 ° - inclination range inward manual 90 - 45 ° - Saw blade speed 2800 rpm - drive 380 V / 2 x 4000 Watt - Compressed air supply 7 bar - Air consumption per working cycle approx. 64 l - space requirement approx. W 4500 x H 1950 x D 1600 mm - weight approx. 1400 kg - with: - cutting length adjustment with positioning control - positioning control renewed approx. 2002 by WOLFF - saw unit swiveling and tilting for high and wide profiles, - as well as shift cuts

Condition: ready for operation (used), Year of construction: 2002, operating hours: 38,040 h, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS CNC Control: Heidenhain iTNC530 X-axis: 1,040 mm Dodpfsxal Rxox Af Uski Y-axis: 600 mm Z-axis: 500 mm Linear drive: On the X-axis Worktable Dimensions: 1,250 mm x 600 mm Max. workpiece weight: 800 kg Spindle Spindle operating hours: 38,040 h Spindle speed: 12,000 rpm Tool System Taper type: SK-40 Tool magazine capacity: 30 Tool diameter: 100 mm Max. tool diameter with empty neighboring pockets: 140 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Length: 3,750 mm Width: 2,340 mm Height: 3,164 mm Weight: 8,900 kg EQUIPMENT - Direct measurement system - Blum tool laser measurement for tool length and diameter - Chip conveyor - Bed flushing - Electronic handwheel

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT Dsdpowprmzsfx Af Ujki two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system). Dsdpewabbvsfx Af Uoki

Condition: excellent (used), Beveling Machine Stock Number: 9283 Manufacturer: Trumpf Year of Manufacture: Type: 104-0 Machine Number: Max. bevel length (infinitely adjustable): Mild steel at 400 N/mm²: 10 mm Mild steel at 600 N/mm²: 8 mm Mild steel at 800 N/mm²: 5 mm Working Speed: 2 m/min Rated Power: 2 kW Stroke Rate at Rated Load: 370 / min Dsdpfxswfzzmo Af Uski Material Thicknesses Min/Max: 3 / 25 mm Weight: 16.5 kg