Used Pellets for sale (269)

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer Ksdpfx Aeiyynwog Ujll > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 Kedpfx Asd Sg Hrog Usll 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Year of construction: 2025, condition: new, Stock No. 2846 Klsdpfx Ajd Hqa Iog Ujl Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request. Kedpfx Agoi Dtbie Uell

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator Kjdoi Dtbuepfx Ag Usll 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Kedpfei Dtbqex Ag Uoll Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: used, Revolver Briquetting Press RUF Type RBK 55/2500/120 S Hydraulic pellet press or briquetting press for grinding sludge ALU chips, metal shavings, or similar materials Serial No. 70002 Year of manufacture: 2009 Briquette diameter: 120 mm Briquette length in pre-compactor: approx. 120 mm Pressing force in pre-compactor: 30 tons at 260 bar Briquette length in main compactor: approx. 80 mm Main press cylinder force: 250 tons at 260 bar Main press cylinder stroke: 120 mm Counter press cylinder force: 250 tons at 260 bar Counter press cylinder stroke: 15 mm Main press cylinder piston diameter: 350 mm Press cycle time: approx. 30 sec. with grinding sludge with low residual oil content Klsdpshg Uz Isfx Ag Usl Hopper size of screw conveyor: 1000 x 600 mm Hydraulic motor power: 37 kW Electrical connection: 400 V, 50 Hz, 45 kW - Revolver with 5 stations for high material throughput - Pre-compaction stage for feeding material into the revolver disk - 2 opposing main press cylinders with 120 mm and 15 mm stroke - Ejector cylinder for discharging finished briquettes from the revolver disk - Infinitely variable hydraulic speed adjustment for each pressing stage - Previously used for grinding sludge from metalworking - Material bunker as a hopper with screw conveyor - In 2018, the machine was fully overhauled by RUF - In 2020, a new SIEMENS Simatic touch panel was installed - Only a few operating hours since overhaul Very good condition Grinding Sludge Recycling - Major cost savings through coolant recovery - Significant reduction in disposal costs thanks to volume and weight reduction of grinding sludge - Grinding sludge briquettes with low residual oil content may potentially be classified as 'non-hazardous waste.' Practical test on 15.01.2026 with aluminum shavings: With optimized parameters, the machine achieves a pressing output of 230 kg aluminum chips per hour. A further increase in performance appears possible in principle, but could not be verified due to lack of material. (see video)

Condition: used, functionality: fully functional, Year of construction: 2017, 1x Mixer Holding Tank / Storage Container - Custom-made from V4A stainless steel - Used in our pellet production line as a buffer tank for herbal mixtures in powder form. It features a feed line (right side) from the mixer and a discharge on the left side to the intermediate storage tank. At the inlet from the mixer, there is also an option to divert the mixture into big bags prior to storage. - Material feed via electric auger (top) - Material discharge via electric auger (angled) Kljdpoxtmxwofx Ag Usl Filling capacity naturally varies depending on the type and volume of the mixture. With our mixtures, it held approximately 2 x 400 kg. All motors and sensors are fully functional.

Condition: like new (used), operating hours: 12 h, i3 Microclean UPGRADE DX PALLET SANDERS (€2000) With this machine, you can also use loose 3mm pellets! And, of course, blocks. As good as new, 1-year warranty. Includes hoses and nozzle. The COLD JET machine is suitable for industrial cleaning tasks, ranging from small to very large projects. The advantage of this machine is its absence of new-generation electronics. It is one of the most aggressive machines on the market. This unit is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Complete blasting setup with the following equipment: COLD JET i3 Microclean (12 HOURS OF OPERATION) 1 x 20' blasting hose 1 x Cold Jet applicator Ksdpsxga Tzsfx Ag Usll 1 x nozzle Price: €24,500 One of the best machines in the world. No electronic systems; therefore, highly reliable and inexpensive to maintain. For questions or to schedule a viewing, please contact DrDryice. All machines sold come with a 1-year warranty. Repair and maintenance services available for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Droogijsstraalmachine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines Cold Jet various models Maintenance and repair of Cold Jet dry ice machines i3 Microclean Dry ice press

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently approx. €250,000 Description: Complete solution for dosing and packaging dry ice pellets. Fully automated process, designed for high output and reliable operation. Klsdpfx Agjw Ttxfe Ujl Advantages: Further information regarding the bagging machine: System dimensions: The full installation measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not have to be installed in a straight configuration. It can be rotated 90 degrees in two sections, allowing for a U-shaped layout. This flexibility permits installation in more confined spaces without impacting performance. The system’s height is fixed and not adjustable. Machine output: The system offers an output of approx. 500 kg per hour. Bag size and weight: Bag dimensions can be fully configured for your requirements – ranging from small bags of approx. 5 grams up to larger bags of 20 kg or even 40 kg. The setting can be flexibly adapted to your production needs. Buffer tank: The buffer tank provides a capacity of 20 kg. Maintenance costs: The average annual maintenance expenditure, excluding materials and call-out charges, is between €1,200 and €1,500 per year.

Year of construction: 2017, condition: reconditioned (used), 2 x Entrade 199kw systems are available to purchase, each approximately 145kw of heat, and 50kw of electric Two boilers available fully reconditioned. These do NOT include engines Ideal for reducing high energy costs. Ksdpfjp Ayqiox Ag Ujll Both systems available to run on woodchip or wood pellets

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively Kodewm Nq Espfx Ag Usll

Condition: used, Specac Kledpex A T T Hefx Ag Uol Specac Atlas 15T Laboratory Press with Temperature Controller, Heating Plates, and Film-Making Set Description: For sale is a complete Specac system for laboratory sample preparation. This set is particularly suitable for the production of pellets, thin films, and other samples for FTIR or materials analysis. The system includes the following devices: - Specac Atlas™ Manual Hydraulic Press (15 tons) - Specac 4000 Series™ Temperature Controller - Specac Atlas™ Heating Plates - Specac Constant Thickness Film Maker accessory set in a transport case - All relevant manuals and the original quality certificate The equipment comes from a laboratory and is in perfect technical condition. The visual condition is very good with only minor signs of use. Technical Specifications Specac Temperature Controller - Model: 4000 Series - Operating voltage: 230 V - Frequency: 50 Hz - Maximum power consumption: 1800 W - Fuse: 7 A Specac Atlas Manual Press - Maximum pressing force: 15 tons - Robust metal construction - Integrated pressure gauge - Suitable for the preparation of laboratory pellets Specac Heating Plates - Temperature-controlled sample heating - Direct connection to temperature controller Film-Making Set - Complete accessory case - For producing uniform sheets/films - Various inserts and tools included Scope of delivery - Atlas 15T laboratory press - 4000 Series temperature controller - Heating plates - Film-making set in case - Connection cables - Original manuals - Quality certificate (Specac, 2014) Important Note: “The table shown in the photos is not included in the sale.” Condition: Used (Specifications and details are subject to change and may contain errors!) If you have further questions, we will be happy to answer them by phone.

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass Kedpextfv Iefx Ag Ujll - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. Kledpfx Agswigbmj Usl 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: ready for operation (used), functionality: fully functional, A good used vacuum transfer system from CFM with lance hose and discharge station in Stainless Steel - requires three phase power and compressed air - ideal for handling powders granules or pellets Kledpfx Agewv Tzge Uel More videos and pictures available - just ask Ready to ship worldwide We will handle shipping and export documentation

Condition: refurbished (used), functionality: fully functional, Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt Factory-refurbished and inspected (used) Ksdpexz Tg Defx Ag Ujll with new rubber steep-incline conveyor belt and new carrying rollers Lightweight frame construction made of steel Belt width: 500 mm Axle distance (A-A): 10,000 mm Conveying capacity: approx. 30–40 m³/h (at 0° incline) Drive: Drum motor, used Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 160 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 800 kg Machine color: freshly repainted Incl. infeed hopper (charging hopper) Suitable for, amongst others, the following bulk materials: Wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, earth, compost, recycling material, trimmings, and much more. Accessories (optional): Internal belt scraper, chassis, tow bar, steel support, electrical installation (plug switch 16 A) Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt | Bulk Material Conveyor | Belt Conveyor | Inclined Belt Conveyor

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Kjdpfx Ajw Ad Rrjg Uoll Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Kljdpfx Aoxk Tg Nog Usl Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Fractions: 3 Mesh size of the screen: - 1st screen deck: punched perforated plate screen, D = 45 mm or as agreed - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Height of screen box: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal Kedpfxjw Spnto Ag Usll - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Year of construction: 2026, condition: new, Oscillating screen ASM series Kedein Ey Sjpfx Ag Ujll S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Fractions: 3 Mesh size of the screen: - 1st screen deck: punched perforated plate screen, D = 43 mm, deep-drawn - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Ksdoxq Rt Tspfx Ag Ujll Height of screen box: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Fractions: 3 Screen area: 6.0 m² per screen mesh size Screen decks: 3 pieces Fractions: 4 Mesh size of the screen: - 1. screen deck: punched perforated plate screen, D = 50 mm or as agreed - 2. screen deck: punched perforated plate screen, D = 30 mm or as agreed - 3. screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Height of screen box: 930 mm L x W x H: 4,000 x 2,200 x 1,700 mm Machine weight: approx. 5,500 kg Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets Ksdpew Sylpofx Ag Usll - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Klsdpeq Iivajfx Ag Ujl Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Year of construction: 1993, condition: good (used), BFM overhead cutter for PE-PS-PA pelletizing Kjdpoipyh Ijfx Ag Uoll