Used Granulator for sale (635)

Condition: excellent (used), Granulator Frewitt MGV 003 Ex-protected version Material stainless steel Dkodpjq H Rztjfx Ahujw Power 5 kW stepless mechanical variator mobile, movable on castors Very good condition, straight from production!!!

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Dkjdpfera N A Nox Ahuow Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: ready for operation (used), Specifications: Model: 1120SPL Manufacturer: Hosokawa Polymer Systems (USA) Dkjdpfxsxvc D Us Ahusw Cutting chamber: 11" x 20" (279mm x 508mm) Motor: 20 HP / 15 kW, 400V, 3 Phase Rotor diameter: 12.5" (318mm) Rotor knives: 3 Bed knife: 1 Screen area: 373 in² (2406 cm²) Typical throughput: up to 650 lbs/hr (≈295 kg/hr) depending on material and screen size Approx. weight: 1,600 lbs (726 kg) Dimensions: L 69” x W 36” x H 57” (1753 x 914 x 1448mm) Features: Heavy-duty welded steel construction Easy access for cleaning and maintenance Safety interlocks and belt-driven motor Ideal for press-side, post-production, or recycling use Clean and well-maintained unit – ready to run

Condition: used, Unused DGM Environmental Technologies model DGH 500/600 granulator. Has approximately 636mm x 615mm feed opening. Unit has (5x2) knives fitted to rotor which measures approximately 500mm diameter x 600mm wide. Includes (2) stator knives and (1) block knife for wedge. Unit is driven by 55kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 0.75kw, 400volt, 50hz, 1383rpm motor. Includes double bag off system with 7.5kw blower. Unit includes control panel. Also includes spare blades, rotor, stator and block. Dodext Efvspfx Ahujkw

Year of construction: 1994, condition: good (used), Brand: Rapid Granulator AB Dkodsxtpuhjpfx Ahujw Type: 1514 Rotor diameter: 150 mm Inlet width: 140 mm Year of manufacture: 1994 Motor power: 1.5 kW Number of rotor knives: 2 knives Weight: 40 kg Other: Collection tray with suction included.

Condition: used, Used strand granulator for multiple strands Dkedpjw Nfvzofx Ahuow Blade width 160 mm Blades in good condition Functionality tested

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. Dkedpsxnaqvjfx Ahujw 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: good (used), Year of construction: 2006, VERY POWERFUL GRANULATOR WITH HIGH CAPACITY Technical data: Rotor Length 4 000 mm Rotor Diameter 1 200 mm Power 500 kW Weight approx. 35 tons The machine is dismantled on stock. Dedjxrl Dijpfx Ahuokw

Condition: ready for operation (used), Rapid Granulator G400-60 KU (2015) Power: 400 V / 3 Phase / 50 Hz General Specifications: Model: G400-60 KU (Rapid 400-Series “Open-Hearted”) Year: 2015 Rotor Diameter: 360 mm Cutting Chamber / Infeed Opening: approx. 620 × 360 mm (Tangential) Motor Power: 22 kW (standard) – some units fitted up to 30 kW Throughput Capacity: up to approx. 600 kg/h (material dependent) Screen Hole Size: 8 mm standard (optional 6 / 10 / 12 mm) Rotor Knives: 3 Fixed (Bed) Knives: 2 Machine Weight: approx. 1,500 kg Voltage / Frequency: 400 V / 50 Hz / 3 Phase Design: “Open-Hearted” for fast cleaning and maintenance Cutting System: Double-scissor action with constant cutting circle (CCC) Safety: Interlocked access system; full rotor stop before opening Application: Ideal for sprues, profiles, sheets, and smaller pipes Condition: Robust construction; suitable for continuous industrial use Key Features: Open-Hearted design for quick access and reduced downtime Heavy-duty steel construction with high throughput Energy-efficient cutting system producing uniform granulate Dksdpfx Ahsxru Tmsusw Easy knife and screen changes Designed for consistent, dust-free regrind

Condition: used, Unused DGM Environmental Technologies model DGH 600/800 granulator. Has approximately 800mm x 700mm opening with feed hopper that has side opening of 970mm x 770mm. Unit has (5x2) knives fitted to rotor which measures approximately 600mm diameter x 800mm wide. Includes (2) stator knives and (2) block knives for wedge. Unit is driven by 75kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 1.5kw, 400volt, 50hz, 1400rpm motor. Includes double bag off system with 7.5kw blower, spare knives and (1) spare screen. Unit includes control panel. Dksdpfx Aexrb Drshusw

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, AVAILABLE ONLY DUE TO FACTORY CLOSURE Djdpfx Aowqxwcehuskw An excellent condition very powerful 75Kw granulator, with a special blade configuration ( HOG) to manage large lump materials without in most cases, need for cutting or a shredder. Maintained by Owner / engineer to high standard and was considered one of the best granulators in his factory. This offer comes with a large bandsaw to pre-cut any oversize, rare earth magnet on the output, followed by a fines separator, electronic s+s metal detection and removal equipment. Kongskilde fan, cyclones and pipework complete the running system. Spare screens and spare Blades enable immediate start up for buyer. Electric mains isolators and control panel included so only needs one conenction into the board to commence operation. Truly a "plug and play" granulation line. Price includes loading to buyers transport. delivery can be arranged at cost.

Year of construction: 2015, condition: used, Rapid G600-150 Granulator; drive motor 90kW; infeed conveyor system; dedusting system; big bag unloading unit; designed for shredding of 6-layer boards 1000x1600x10mm; Dkjdpsxpw R Asfx Ahuow deep drawn and welded tanks to a height of max. 5500mm; capacity 1200 to 2500kg/h Condition: Good

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Dkodpfx Ahsxnaqisusw A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator, Drive power: 250 kW, control cabinet with star-delta switching Rotor length: 1200 mm, Dedpsxiw Hwsfx Ahuokw Rotor diameter: 800 mm, Number of blades/rotor: 36 pcs, Number of blades/stator: 4 x 6 pcs, 2 hydraulically rotatable stators each with 2 rows of counter blades, Hydraulic pusher, Bearing temperature monitoring, Central lubrication for the rotor bearings, Net weight: 29,800 kg, Year of manufacture: 2005, overhauled in 2025, all wear parts replaced. Available from approx. December 2025.

Condition: ready for operation (used), Specifications of 60/100 • Rotor Dimensions: 400 mm diameter × 620 mm width • Motor Power: 70 kW Djdpsxrtncefx Ahuekw Nwsbr Asw R Un Aj Ag Shon Iebr A Ag Sswm Nt Tehetk • Throughput Capacity: o PET bottles (with 12 mm screen):1ton/hour o Pre-shredded materials (with 8 mm screen): up to 1.2 tons/hour • Feeding Opening: Approximately 980 × 1,300 mm • Rotor Configuration: Typically equipped with 7 rotor knives and 2 stator knives; an optional third stator knife is available for increased cutting efficiency • Applications: Suitable for both dry and wet operations, including integration into washing lines for plastics recycling

Condition: used, Used mild steel Cumberland blade mill type 56T Granulator Hp 10. Unit has (3) rotor blades. Milling chamber measures 200mm diameter x 1450mm long. Driven by 7.5kW/10HP 380/660 Volt 975 rpm motor. Dedexputzopfx Ahuskw

Year of construction: 2003, condition: refurbished (used), functionality: fully functional, machine/vehicle number: BF 030003, This heavy duty 1200mm Granulator was refurbished fully in 2020 . Since then it has done only a very few tonnes of light weight containers after the refurbishment. New fixed and fly blades were fitted recently and it has not run since. 4 Rotating blades and 2 Stator blades. The semi solid rotor is water cooled if needed. Single step Belt drive from 110Kw Motor. Up to 1500 kgs per hour depending on the type of materials and feed rate. Air extractio to cyclone and bagging tower for big bags (FIBC) included. Loading conveyor with metal detection tunnel also included. Capable of grinding rubber also as fitted with the water cooled rotor. Two hoppers included , a standard one as shown in pictures and also included is a top entry completely enclosed hopper (not shown) suitable to received pre-shredded plastics or rubber. Dsdpsv Su A Ejfx Ahuskw

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), overall weight: 1,760 kg, Year of construction: 2011, Vespa granulator available immediately. The machine is currently disconnected at the customer's site and has been removed in working condition. The installation is complete with blower and conveying system. Technical specifications: Output: 250 - 400 kg/h Rotor diameter: 400 mm Rotor knives: 6 x 300 (pcs x mm) Stator knives: 4 x 300 (pcs x mm) Power: 30 kW Weight: 1,760 kg Dksdpfxoxln Ikj Ahuow Transport dimensions of granulator: 2,420 x 1,520 x 1,230 mm

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Dkedpsxnaqcjfx Ahusw Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Dsdpfoxgtthjx Ahuskw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Tria Model: 70 kW Dkedpfx Ahjwnx H Ssujw Condition: ready for operation (used) RIA S.p.A. Ideal for medium-to-high throughput applications. Designed for efficient inline or standalone size reduction of sheet, cups, profiles, and other plastic waste. Construction: Built-heavy-duty, suitable for inline integration under thermoformers or as standalone units.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 15,500 kg, rotor diameter: 800 mm, rotor width: 2,000 mm, power: 250 kW (339.91 HP), rotational speed (max.): 480 rpm, Equipment: rotational speed infinitely variable, Genox GXC2000G Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 250kW Drive Motor with outboard rotor bearings (200kW - 315kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 2,000mm wide x 800mm diameter cutting chamber with a choice of either a 5, 7 or 9 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Djdpfexnap Ssx Ahuskw A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. 800mm wide x 420mm diameter cutting chamber with a choice of either a 6 knife, 3 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Djdpfxjxnap Es Ahuekw

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Dkjdpexnapxefx Ahuow A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2025, operating hours: 5 h, condition: new, functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. 800mm wide x 420mm diameter cutting chamber with heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Dkjdpfx Aexnaprehujw This machine is in stock at our warehouse in the UK.