Used Okuma Mb 46 Vae for sale (235)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h Nksdpfjyxmyuex Agwsw EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: used, Year of construction: 2000, x-travel 1.050 mm y-travel 560 mm z-travel 450 mm Nksdpfx Agsyxhiwjwjw Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit Nkedpfx Aoyvfhdsgwsw - Various accessories

Condition: ready for operation (used), Year of construction: 1997, spindle speed (max.): 6,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 240 mm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis Okuma LB15i-M was manufactured in 1997. It features a spindle speed of up to 6000 rpm and a spindle power of approximately 15 kW. The machine includes 5 motorized front tools and 2 radial tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Okuma LB15i-M horizontal turning machine we have for sale. Contact us for further details. • Turret positions: 12 • Driven tools: Yes (5 front + 2 radial) • Tailstock: No • Distance between centers: 500–1000 mm • Spindle nose: JIS A2-6 Technical Specification Counter Spindle No Nedpoywu Sijfx Agwjkw Driven Tools Yes

Condition: good (used), Year of construction: 2015, FOR SALE: OKUMA MILLAC 852VII Vertical Machining Center (2015) Description: High-performance OKUMA CNC vertical machining center for sale, model MILLAC 852VII. Japanese-designed machine, renowned for its exceptional rigidity and surgical precision. Ideally suited for machining complex and heavy prismatic workpieces. Technical Specifications (Source: Manufacturer’s Plate): - Brand: OKUMA Corporation (Made in Japan) - Model: MILLAC 852VII - Year of manufacture: March 2015 (2015.03) - Power supply: 380 V / 3 phase / 50 Hz - Rated power: 44.3 kVA (High-power spindle motor) - Compliance: CE Marked (Certified for the European market) Working Capacities (Standard for model 852VII): - Travels (X / Y / Z): 2,050 mm x 850 mm x 750 mm (Very large capacity) - Table dimensions: 2,200 mm x 850 mm Nksdpfx Ageyr Id Hjwjw - Maximum table load: 3,000 kg - Spindle speed: Up to 6,000 or 10,000 rpm (depending on configuration) - Spindle taper: BT 50 (High rigidity) - Automatic Tool Changer (ATC): 36 positions (or more, depending on configuration) - Machine weight: approx. 17,500 kg (Ultra-heavy-duty frame) Key features: - Recent machine (2015), still complies with current technology standards - Robust box ways for perfect surface finishes

Condition: used, OKUMA LB 10 II M is a CNC turning lathe, engineered for precision, high accuracy and reliability. Capacities: swing over cross‑slide 340 mm, over bed 480 mm, max turning Ø 170 mm, spindle hole 51 mm, max length 300 mm, bar passage 42 mm; travels Z350/X150 mm; rapid Z20/X15 m/min. Turret 12 pos., 12 driven tools; C‑axis res. 0.01°; spindle 50–6000 t/min; voltage 3x400 V 50 Hz; weight ~3400 kg; footprint 2000×1640×1780 mm. Accessories: lamp, coolant system, bar feeder, chip conveyor. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and precision machine tool applications. Nkodsyxnx Eopfx Agwew

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Nksdpfsyxnxxex Agwjw

Condition: used, OKUMA LB 2000 EX is a CNC turning lathe designed for precision, high accuracy and reliability. Capacities: spindle hole 62 mm; max turning length 300 mm; max turning diameter 430 mm; travels Z 350 mm, X 260 mm. Specs: rapid traverse Z 30 m/min, X 25 m/min; stepless spindle 50–6000 t/min; power 50 Hz 3x 400 V; weight ≈3250 kg; dimensions L1900×W1750×H1850 mm. Equipment: 12-position turret. Capable of tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, machine tools. Nkjdoyxnxfspfx Agwew

Condition: good (used), center height: 215 mm, grinding length: 1,500 mm, total width: 2,300 mm, total length: 5,530 mm, total height: 2,100 mm, grinding diameter: 430 mm, Matrix Okuma Universal Cylindrical Grinder Model: GU – 40 Max Dia Ground: 430mm Max Between Centres: 1500mm Wheel Size: 355 x 50 x 127mm Headstock Speed: 10-150 RPM Variable Table Swivels: 8 Degree Nedpfeyglhfex Agwskw Machine With: Coolant Filtration Tank Steadies Internal Grinding Attachment with Quill Dimensions: 5530 x 2300 x 2100mm High Weight: 6200 Kgs

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP-P200L Nsdpjx D Nf Iofx Agwokw This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2007. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Application Types Nedpfx Agex D Nf Uowekw Milling

Condition: excellent (used), Year of construction: 2021, CNC Lathe Okuma Genos L3000 e MYW Control: OSP-P300LA-e Year of manufacture: 2021 Internal machine no.: 15 Max. machining diameter: 390 mm Nsdjyt E A Nspfx Agwekw Swing diameter over cross slide: 260 mm Max. turning length: 500 mm Travel paths: X-axis: 235 mm Z-axis: 450 mm Y-axis: ±50 C-axis: 360° / 0.001° Turret: 12 stations – all driven Spindle speed: 38 - 3,800 rpm Tool holder: VDI 40 Accessories/Equipment: - Chip conveyor - Touch setter - One Touch IGF - Parts catcher - Reinforced coolant system 8 bar - Extraction unit

Condition: excellent (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Chip conveyor Approx. 40 toolholders BT 50 Nkodpfxoyw Ui Io Agwow

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, We are offering this ready-to-use Okuma LB15 CNC lathe, year of manufacture 1989. Noted defects: The seal on the Plexiglas door should be replaced over time. The machine is still in operation and can therefore be inspected and tested on site. Manufacturer: Okuma Model: LB15 Year of manufacture: 1989 Mains voltage: 380 V Number of phases: 3 Rated power: 21 kVA Frequency: 50 Hz Total rated current: 36 A Maximum motor current: 28 A Breaking capacity: 7.5 kA Nodpfoyw Hniex Agwokw Circuit diagram no.: W5000-118-068 Serial number: 5813 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135908, turning diameter: 710 mm, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 6,000 mm, total width: 2,500 mm, overall weight: 14,000 kg, spindle diameter: 120 mm, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OPS-P 200 L, tool weight: 1,000 g, number of slots in tool magazine: 20, Equipment: chip conveyor, OKUMA MULTUS B 300 CNC Turning and Milling Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 96 A - Connection load: 47.8 kVA - Swing diameter over bed: 710 mm - Distance between centers: 1500 mm - B-axis travel: 1550 mm, rapid traverse: 12 m/min - C-axis travel, control angle: 360°, rapid traverse: 200° - B-axis indexing angle: 0.001° - Number of tools: 1 L or M tool 25 mm, diameter: 40 mm - Rotational speed of live tools: 6000 rpm Nkodpfx Ajyvrq Hegwew - Tool holder: HSK 63 - Including chip conveyor, coolant system, as well as tool holders as equipped on the tool changer Note: The item must be collected between 12.05. and 22.05.2026 on a binding, mutually agreed date. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 151576, travel distance X-axis: 690 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,500 mm, total length: 9,500 mm, total width: 2,500 mm, overall weight: 14,500 kg, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OSP-P 200 L, tool diameter: 90 mm, tool weight: 1,000 g, number of slots in tool magazine: 40, OKUMA MULTUS B 400 CNC Turning and Milling Center Nkodpsyvrn Esfx Agwsw - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 190 A - Connection load: 58.9 kVA - Turning diameter: up to max. 710 mm - Swing diameter over cross slide/bed: 710 mm - Y-axis travel: +115 / -115 mm - C-axis travel: 360° - B-axis travel: 225° - Main spindle chuck diameter: 340 mm - Spindle nose diameter (front bearing): 150 mm - Spindle bearing diameter: 101.6 mm - Feed rate in X/Y/Z: 0 - 1000 mm/rev - Rapid traverse X/Y/Z/W: 40/26/40/20 m/min - Rapid traverse C-axis: 200 rpm, B-axis: 30 rpm - NC tailstock (W-axis) - Taper: MK 4 - Tool holder: HSK 63 - Including chip conveyor and coolant system Note: The HSK tool holders in the tool magazine are included in the scope of delivery! Note: In 2023, the machine underwent several overhauls with a total value of EUR 34,000. Documentation available; detailed breakdown upon request! Note: Item must be picked up bindingly between 12.05. and 22.05.2026 on a date yet to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Nkedpjywicvjfx Agwow

Condition: excellent (used), Travels: X-axis: 155 mm Z-axis: 320 mm Nedjyvy Utepfx Agwskw Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Nedeyn Em Rjpfx Agwekw Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller: OSP-100L, IGF Turning length: 200 mm Turning diameter: 280 mm Sloping bed: No Spindle bore: 62 mm Turret head: Yes, 12 positions VDI 40 Travel X-axis: 210+845 mm Travel Z-axis: 360 mm Swing over bed: 320 mm Spindle speed: 40-400/min Main motor power: 15 kW X-axis rapid feed: 60 m/min Nodpfjwufc Tsx Agwjkw Z-axis rapid feed: 30 m/min Machine weight: 6000 kg

Condition: used, OSP GRAPHIC PANEL 5000 E0105-800-027 The parts were removed from production facilities that were in operation until they were decommissioned. Nedoyn R S Eopfx Agwjkw Condition: used (functional)

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand OKUMA Model OSP E-100M Main Drive Number of axis 4 Additional Equipment Balluf read/write Renishaw MP10 30 Bar coolant Mayfran Consept 2000 This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Njdpfx Agex D Nlzowokw Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. Njdoyq Ngmspfx Agwskw • Control: OSP P 300LA • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm ; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: CM5; 500 kgf thrust; rotating tip • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min • Tool presetting: Manual • Programming: Conversational IGF

Condition: ready for operation (used), Year of construction: 2018, This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Additional equipment • Spindle Speed (Motorized Tool Spindle): 5000 rpm Machine Benefits Technical Machine Benefits • Maximum swing: 450 mm / workable diameter: 340 mm / maximum workable length: 1020 mm / bar capacity: 65 mm • Turret type: 12 ut vdi / number of tools: 12 Nkedpfx Aeyalp Negwsw • Spindle speed (main spindle): 3000 rpm / spindle nose: asa 8 / spindle bore: 65 mm

Condition: ready for operation (used), Year of construction: 2007, overall weight: 27,000 kg, spindle speed (max.): 6,000 rpm, This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. • Axes: 4 • Maximum Machining Area X/Y/Z: 1000 mm x 900 mm x 1000 mm • 4th Axis: 360° x 1° • Rapid Feed Rate: 30 m/min – 12 m/min • 1° B-axis • Drive Power/Max. Torque: 37 kW 10 min, 26 kW continuous load / 606 Nm • Tool Positions: 150 • Tool Holder: MAS BT 50 • ConSep System • Measuring Probe • Tool Breakage Monitoring • Pallet station with 6 pallets, pallet size 630 x 630 mm • External cooling/internal cooling 20 bar/internal air Nkodpfex D Iw Nex Agwow Dimensions Machine Depth 10500 mm