Used Okuma Lu 25 for sale (229)

Condition: used, Year of construction: 1995, turning diameter 150 mm turning length 1250 mm control OSP 7000 L total power requirement 37 kW weight of the machine ca. 8500 t Hodpfjyi Hwtjx Aa Isu

Condition: used, Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible. Hsdpfx Aasz E Nq Re Iou

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC turning machine Okuma LU 3000 EX-M2SC 1000 Control system: OSP-P300LA Year of manufacture: 2022 Internal machine number: 66 Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed: 5 - 5,000 rpm Tool shank: VDI 40 2 tool turrets A-turret: 12 tool positions / all positions powered B-turret: 8 tool positions - Tailstock - Hinged-belt chip conveyor - 3-jaw chuck Kitagawa B-212 Z220, bore in the chuck Ø 91 mm Hsdpfx Ajzwl Aisa Isu - Touch setter - One Touch IGF - Handwheel on the control panel - Tool monitoring system - Reinforced coolant pump, 8 bar

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Hedpfx Aeztctqsa Isu Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, CNC lathe Okuma LU35-M-2ST-600 Control system: OSP-P200L Year of manufacture: 2008 Internal machine number: 25 Max. turning diameter: 550 mm Max. turning length: 600 mm Bore diameter of spindle: 90 mm Spindle speed: 3,200 rpm Main spindle: 30 kW A-turret: 12 stations (all powered) B-turret: 10 stations Tool holder: VDI 50 Accessories Hsdpfjyliquex Aa Ieu Chuck Kitagawa N15 Chip conveyor Interlit Including external coolant system Door automation Touch setter

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Internal machine no.: 27 Max. turning length: 950 mm Max. turning diameter: 340 mm Max. swing diameter over cross slide: 380 mm Max. swing diameter over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder interface: BMT 2 pcs. tool turrets A turret: 12 tool positions (all driven) B turret: 8 tool positions Hodpfxjyluvio Aa Ieu Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touch setter High-pressure coolant pump Enlarged coolant tank

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) Hjdoyyk I Eopfx Aa Iju B turret: 8 tool positions Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Reference: LT-2512 Manufacturer: Okuma Hjdpfx Aajy Smz Ee Ieu Model: LVT300-M Control Unit: Okuma OSP-P200L Year of Manufacture: 2007 Keyboard / Software Language: International / Spanish Country of Origin: Japan Technical Specifications Capacity Swing over bed: Ø 280 mm Swing over Z-axis carriage: Ø 280 mm Swing over X-axis carriage: Ø 280 mm Max. turning diameter x length: Ø 280 x 200 mm Main Spindle Spindle bearing diameter: Ø 100 mm Spindle nose type: JIS A2-6 Spindle bore diameter: Ø 62 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 40 – 4,000 rpm Spindle motor: 22/15 kW (20 min/continuous rating), VAC type X-Axis Travel: 210 mm + 845 mm (for workpiece loading) Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse rate: 60,000 mm/min Z-Axis Travel: 360 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse rate: 30,000 mm/min Turret Type: VDI 40 Number of tool stations: 12 (L or M) Tool Dimensions O.D. turning shank size: 25 x 25 mm I.D. boring bar shank diameter: Ø 40 mm Live Tooling / Driven Tools Rotational speed: 45 – 4,500 rpm Speed ranges: 1 range, infinitely variable Drive motor: 3.7/2.2 kW (15 min/continuous rating) C-Axis Controlled indexing angle: 360° (0.001° minimum increment) Rapid traverse rate: 200 rpm Dimensions and Weight Machine height: 2,500 mm Floor space footprint: 1,320 x 2,800 mm Machine weight: 5,600 kg Included Options EWAB palletized conveyor system (pallets not included) MAYFRAN chip conveyor FORKARDT 3QLC 200-54 hydraulic chuck (3-jaw / 210 mm) Tool presetter (TOUCH SETTER) TOOL LIFE MANAGEMENT function Rigid tapping DNC-T1

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Hedpfx Aezghc Dsa Isu Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Okuma LU15-MY Year of manufacture: 2001 Commissioned: 2002 Control system: U100L A video of the machine can be viewed on our website. Machine features: Hjdpszh Iwksfx Aa Isu ▪ IGF dialog programming ▪ Movable tailstock ▪ Powered tools – 12 stations on the A-turret ▪ C-axis ▪ Y-axis ▪ Touch probe ▪ Preparation for steady rest on the B-turret ▪ Internal chuck ▪ Signal tower ▪ Mayfran chip conveyor Technical details: • Max. turning diameter: 340 mm • Max. turning length: 1000 mm • X-axis travel: upper 260 mm (170+90); lower 140 mm (90+50) • Z-axis travel: upper 1,040 mm; lower 1,015 mm • C-axis travel: 360° • Spindle – number of speed steps: 2 – automatic • Bore diameter: 62 mm • A-turret (upper): 12 tools, all suitable for M-tools, VDI 40 • B-turret (lower): 8 tools, VDI 40 • Rotating tool speed: 45~4500 min -1 • Rapid traverse feed rate: mm/min X: 15,000 Z: 20,000 C: 200 min -1 • Tailstock quill diameter: 90 mm • Tailstock quill stroke: approx. 100-120 mm ▪ Machine dimensions including chip conveyor L x W: approx. 4300 x 2200 mm ▪ Machine height: approx. 2230 mm ▪ Weight: approx. 7900 kg Optional: ▪ Transportation organization and execution ▪ Machine delivery and installation ▪ Machine commissioning

Year of construction: 1988, condition: ready for operation (used), Turning diameter over bed/slide: 520mm/340mm, turning length: 850mm, speed: 3500rpm, spindle bore: 70mm, chuck diameter: 315mm, bar capacity: 70mm. Machine weight: approx. 7500kg, control: OSP 500L. Documentation available. On-site inspection is possible. Hedpfewz N Tcjx Aa Iju

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Hjdpfx Asx D R Rfsa Iju Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), OKUMA control system Turning diameter: 650 mm Turning length: 1450 mm Hjdsyxrggspfx Aa Iou For technical specifications, see the photo. The price of the machine includes the accessories shown in the photo.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Hsdpfx Aaju U E Avo Iju Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) Hjdpfxjtqu U To Aa Iju One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine

Condition: used, OKUMA BLUSHLESS SERVOMOTOR DRIVE UNIT BL-120E-20 Hedpfx Aey Suw Uja Iju

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control Hedpfx Aasy Drune Ieu

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Hodsyu N Uxepfx Aa Ieu

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hedpfx Aajx Hx Dnj Ieu Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed (max.): 4,800 rpm Axes: 4 Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Hedpfx Aaoy Txyco Iju Coolant station Standard spindle bore Tailstock: manual

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 62 mm, spindle speed (max.): 5,200 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Swinging diameter over cross slide: 370 mm Turning length: 1,000 mm Swinging diameter: 350 mm Hsdpfx Asy S S Anja Ieu Spindle bore: 62 mm Spindle speed (max.): 5,200 rpm MACHINE DETAILS Coolant pump: 8 bar EQUIPMENT Documentation/Manual Speed infinitely adjustable A-turret VDI40, 12 stations (all powered) B-turret VDI40, 8 stations Touch setter for A & B turrets Tailstock, manual Chip conveyor Extraction system Bar feeder, Samsys Multi-3000

Condition: excellent (used), Year of construction: 2007, Control system OSP P 200L Swing over bed 530 mm Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Hodpfez Hwmcex Aa Iju Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12 VDI 40 Driven tool speed 4,500 rpm Driven tool power 5.5/3.3 kW Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: good (used), Year of construction: 2002, Control system OSP U 100L, Swing over bed 530 mm, Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Hjdpfx Ajz Hwf Eja Ieu Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12, VDI 40 Driven tool speed 4,500 rpm, 5.5/3.3 kW, Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm, 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Hedpfjzat Tvex Aa Iou Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few operating hours. * Machine designed for high chip removal capacity. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Oil-fed guide lubrication system with automatic machine shutdown. * Renishaw tool presetter. * BT 50 spindle taper. * High-torque motor power: 18.5 kW. * Cutting force: 580 N/m. * Chip removal capacity: 540 cm/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS-232. * Tool life management and tool consumption tracking. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * Tool magazine capacity: 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron particulate filter system. * LTA smoke filtration equipment. * Hinge-type rear chip extractors. Hsdpfx Aaoz E Dyto Isu * Machine currently in production. * Can be inspected by a certified Okuma technician. * Condition like new. * Extensive set of BT 50 collets. * Electrical transformer, documentation, parts list, electrical schematics, and programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold immediately.