Used Mazak Lathe for sale (319)

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Laedpsx S Hm Iefx An Uob Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Ljdpjyyxlfjfx An Ueab Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Laodoyyxh Tjpfx An Ujb Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lodpfeyyxzmsx An Usab

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM Lodpfeyz Stljx An Ujab MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, Max. turning dia. 320 mm Max. turning length 450 mm Spindle speed 5000 rpm Lasdpfx Ajyhzfgsn Uob Spindle speed on live tools 4500 rpm X/Z - 240/495 mm Y-axis +/- 50 mm No. of stations in turret 2 x 12 pcs Control: Mazatrol PC-Fusion 640 T Equipped with: Gantry loader w/feeder

Condition: used, Year of construction: 2006, Turning length 1500 mm Lajdpfjx Nfwgox An Ueb Max. turning dia. 420 mm Spindle bore 105 mm Spindle speeds 3300 rpm Spindle speeds on live tools 3000 rpm Turret w/12 stations Hydraulic tail stock Control: Mazatrol 640 T Nexus Equipped with: Magazine bar feeder FMB SL 80 3 pcs. live tools Various tool holders

Condition: used, Year of construction: 2002, Max. diameter 430 mm Max. length 600 mm Max. spindle speeds 4000 rpm Max. spindle speed on live tools 4000 rpm Lajdpfjxfcbfox An Ujb X/Z travel - 310/605 mm 2 x 12 station turrets Control: Mazatrol PC Fusion 640 T Equipped with: Various toolholders

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Ledpfx Asx N A I Nsn Ujab Turret w/12 stations Control: Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders

Condition: ready for operation (used), Year of construction: 2006, operating hours: 13,006 h, functionality: fully functional, machine/vehicle number: 190433, turning length: 1,050 mm, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 1,050 mm, controller model: Mazatrol Matrix, The technical data is based on manufacturer specifications. The seller cannot guarantee its accuracy! Operating times according to control system: Total: 5,025 h Automatic machining: 1,866 h Pure machining RV1: 1,037 h Pure machining RV2: 298 h Operating time: 13,006 h Tool type: Capto C6 Tool changer: 72 positions Turret: 9 positions TECHNICAL DETAILS Max. turning diameter: 660 mm Diameter over bed: 760 mm Turning length: 1,050 mm X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,050 mm Main spindle speed: 5,000 rpm Counter spindle speed: 5,000 rpm Milling spindle: 12,000 rpm MACHINE DETAILS Lasdpfx Anjy Slqfo Uob Control system: Mazatrol Matrix Main circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current draw: max. 84 A Main motor voltage: 400 V Rated power: 91.8 kVA Weight: 11,800 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 178979, turning length: 309 mm, turning diameter: 280 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, controller model: Mazatrol 640T Nexus, No reserve price – guaranteed sale to the highest bidder! The technical data is sourced from the manufacturer's information. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Max. turning diameter: 280 mm Max. machining length: 309 mm Swing diameter: 550 mm X-axis travel: 190 mm Z-axis travel: 330 mm Spindle bore: 61 mm Rapid traverses X/Z: 30/33 m/min MACHINE DETAILS Control: Mazatrol 640T Nexus Main power circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current: 31 A Main motor voltage: 400 V Rated power: 24 kVA Weight: 3,500 kg Note: The bar feeder is not included in the offer. Ledpfjy Sln Rsx An Ujab

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265771, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 560 mm, workpiece weight (max.): 20 kg, The technical data is based on manufacturer specifications. The seller cannot guarantee its accuracy! TECHNICAL DETAILS Travel X-axis: 195 mm Travel Z-axis: 560 mm Maximum spindle speed: 5,000 rpm Rapid traverse X-axis: 30 mm/s Rapid traverse Z-axis: 33 mm/s Maximum turning diameter: 350 mm Laedpfx Asy Saiien Uob MACHINE DETAILS Control: Mazatrol Smart Main power circuit: 3-phase AC Main power circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current consumption: max. 53 A Main motor voltage: 400 V Rated power: 29.1 kVA Dimensions & Weight Machine dimensions (L x W x H): 2,650 x 1,700 x 1,700 mm Machine weight: 4,500 kg

Condition: used, Year of construction: 2016, Mazak Variaxis i-500 5 Axis CNC Machining Centre. S/No. 276584 (2016) with Mazatrol Smooth X CNC Control, 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Mazak Spindle Chiller Unit, Absolent A Mist 10 Oil Mist Filter Extractor, Cromer Swarf Management and Filtration System, Renishaw RMI-Q Tooleye, Machine Weight 8000kg. Country of Origin: Japan Ljdpoy Shk Usfx An Usab Please Note: Erowa Machining Fixture Not Included Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2016, condition: used, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 268148 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Lodpoy Shknsfx An Ueab Please Note: Erowa Machining Fixture Not Included. Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2016, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 276585 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Lajdpfx Ansy Shiwo Ujb Please Note: Erowa Machining Fixture Not Included Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2022, Mazak VTC 820/20 CNC Vertical Machining Centre with Mazatrol Smooth G Touch Screen CNC Control. S/No. 323190 (2022), Table Size 2500mm x 820mm, Spindle Speed Max 18,000rpm, CAT40 Spindle Taper, 30 Tool ATC Fitted with Various Tool Holders and Renishaw Probe, Cromar Series IV Swarf Coolant System, CIL 1501 Chiller Unit, Clara 3nine Oil Mist Filter Extractor, Machine Weight 14,000kg. Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described Lajdpfx Aey Shhyon Ujb

Condition: used, Year of construction: 2005, Mazak Variaxis 730-5X CNC Vertical Machining Centre. S/No. 567181684 (2005). Country of Origin: Japan Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Lsdpfx Aoy Sha Ajn Uoab

Condition: used, Year of construction: 1998, x-travel 1120 mm y-travel 510 mm z-travel 510 mm control Mazatrol M Plus spindle turning speed range 0-7000 U/min tool taper Cat 40 tool piece magazine with 24 Plätzen max. table load 500 kg Laodpfxey Ty Eas An Usb table dimensions (lengthxwidth) 1460 x 510 mm Overall size 3600x2700x2590 mm machine weight ab. 5850 kg Equipment/Accessories: - 4 vices - 1 chuck - 18 tool holders with tools - Transport locks - USB flash drive with data backup - Technical documentation

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 141643, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: MAZAK, controller model: MAZATROL M PLUS, total height: 2,250 mm, total length: 4,400 mm, total width: 2,400 mm, table width: 510 mm, table length: 1,460 mm, table load: 500 kg, overall weight: 6,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 24, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 8,000 g, Equipment: chip conveyor, MAZAK VTC-20 B Vertical Machining Center - Tool holder: SK 40 - Max. distance from the spindle face to the clamping surface: 690 mm - Cutting feed rate X/Y/Z: 1 - 5000 mm/min - Max. tool diameter: 80 mm with an occupied adjacent position - Max. tool diameter with a free adjacent position: up to 110 mm - Incl. chip conveyor MAYFRAN - Incl. the tool holders located on the tool changer - Note: the machine vise clamped on the table is not included in the scope of delivery! Note: the item must be collected between July 14th and July 16th, 2026, on a date to be agreed upon. FCA D-45883 Gelsenkirchen - loaded onto a truck. Lodpoy Twcvofx An Uoab

Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. S/No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size 500mm x 405mm, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals. Country of Origin: Japan Lsdpsy Icqzefx An Uoab Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: This lot is located in Wolverhampton, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2010, Mazak VTC820/30 3-Axis Machining Centre. S/No. 200131 (2010) with Mazatrol Matrix Control, X/Y/Z Travels 3000/800/720mm, Table 3500mm x 820mm, Spindle Speed 18,000rpm, Spindle Taper BT40, B Axis Swivel Head +/- 110, Removable Centre Partition. Country of Origin: United Kingdom Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Laodpfxjy Ib Ryj An Ueb

Condition: used, Year of construction: 2010, Mazak VTC 800/30SR 5-Axis Machining Centre. S/No. 215592 (2010) with Mazatrol Matrix Control, X/Y/Z Travels 3000/800/720mm, Table 3500mm x 820mm, Spindle Speed 18,000rpm, Spindle Taper BT40, B Axis Swivel Head +/- 110. Country of Origin: United Kingdom Laodsy Ib N Nepfx An Usb Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2005, travel distance X-axis: 730 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 560 mm, table width: 500 mm, table height: 500 mm, spindle speed (min.): 10,000 rpm, We can offer you a 5-axis Mazak Variaxis 730-5X with Palletech system. Technical data: Maximum workpiece diameter x maximum workpiece height: 730 x 500 mm Pallet size: 500 x 500 mm Number of pallets: 12 (Palletech High-rise) X-axis travel: 730 mm Y-axis travel: 850 mm Z-axis travel: 560 mm A-axis (table tilt): +30/-120° C-axis (table rotation): 360° (indexing 0.001°) Spindle speed: 35–10,000 rpm Spindle motor: 30/22 kW Tool changer: 120 Tool type: BT 50 Ledpjy Ryylofx An Usab If you have any questions about the machine or would like to schedule an inspection, please do not hesitate to contact us by phone or email.

Condition: not inspected (used), Year of construction: 2006, ● Availability: Immediately, by arrangement ● Payment terms: Advance payment – by bank transfer ● Internal No.: KA1 ● Can be inspected while powered on: Yes Technical data: Turning diameter: 760 mm Turning length: 1,524 mm Control system: Mazak Matrix CNC Spindle speeds: 3,300 / 12,000 / 3,300 Spindle diameter: 78 / 78 mm Tool magazine slots: 80 Tool holder: Capto Max. tool length: 400 mm Max. tool diameter: 125 / 90 mm Laodpfx Aney Tm I Us Ueb Machine times: Total time: 72,894 h Automatic operation: 42,535 h Cutting time: 33,294 h Effective cutting: 15,281 h Scope of delivery: Available manuals (completeness not guaranteed) Main and counter spindle Milling unit (mill spindle) Two-force chuck Kitagawa QJ-312 Pallet pool with robot Coolant system available Extraction system not included Dimensions & weights: ● Installation dimensions L x W x H approx.: 5200 x 2500 x 2750 mm ● Weight approx.: 7800 kg Additional notes: ►Upon request, we can offer transport to the desired location. ►The quoted price is net plus VAT. ►The goods are sold with exclusion of any warranty. ►Technical data without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Laodpsyh N Aaofx An Uob Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor