Used Okuma Mx 45 Vae for sale (204)

Condition: used, Year of construction: 2001, x-travel 560 mm y-travel 460 mm z-travel 450 mm Gkodjyi Hv Nopfx Ag Toa Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm X – Axis Travel 560mm Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Renishaw work probe Coolant system and conveyor Gkedpfxozair Uo Ag Toa 2 x identical machines available

Condition: like new (used), Year of construction: 2022, operating hours: 521 h, functionality: fully functional, machine/vehicle number: L3M0474, turning length: 500 mm, turning diameter: 300 mm, total height: 2,210 mm, total length: 3,950 mm, total width: 2,260 mm, overall weight: 5,680 kg, Equipment: documentation/manual, used Okuma lathe As-new, well-maintained condition Gsdpfey Rx Tdox Ag Tska 521 operating hours 347 spindle hours

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Gsdeztctqjpfx Ag Toka Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Godpfx Aji D Naasg Teka

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Gjdpeztpmdofx Ag Tjka Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: used, Year of construction: 2008, Control OKUMA OSP-P200M. Cooling threw spindle. Rotating axe A Tsudakoma 250. Chip conveyor RENISHAW OMP40 Godpfxozqtbge Ag Tska Tool probe Velikost upínací plochy 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle revolutions 50 - 8000 rpm DIN 40 Number of tool positions 48 Machine dimensions 2805 x 2160 x 2746 mm Machine weight 7100 kg

Condition: ready for operation (used), Okuma DC-S1A DC power supply for 4 axes, CZ-270C, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Gsdpfx Agsi Ecane Tska

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of supply as per the photos. Gkodpfx Agoi Ecayj Toa

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A, part number E4809-045-086-A / 1911-1509-44-90, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as per photos. Gkodpsi Eca Defx Ag Tsa

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit, Model 1A, E04809-045-019D, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Gedpfx Asi Eca Ijg Toka

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit, Model 1A, E04809-045-071, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Gjdpfxei Eca Sj Ag Teka

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 500 mm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details. • CNC: OSP U100L • Max turning diameter: 340 mm • Max turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increment) • Rapid feed: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm • Live tooling: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Additional equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blow • Turning tool holder kit • 4 radial live tools • 4 axial live tools Technical Specification Taper Size VDI 40 Counter Spindle No Gkodpfx Asy N Sabeg Toa Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller model: OSP-P200M, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 460 mm Travel Z-axis: 460 mm Spindle speed range: 50 - 15,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Tool magazine: 32 positions MACHINE DETAILS Control: OSP-P200M Main drive motor: 22 kW Dimensions & Weight Required space (L x W x H): 2,850 x 2,810 x 2,750 mm Machine weight: 7,200 kg EQUIPMENT Chip conveyor Internal coolant supply Standard filtration unit Gedpfsx I Ecyex Ag Tjka

Condition: used, OKUMA DC POWER SUPPLY Gjdpfxjy Supwj Ag Tjka DCPS-1 FOR 2 AXES

Condition: used, OKUMA POWER SUPPLY GLP 5000T E0451-521-037 . 2663 Gkedpjy S Dr Uefx Ag Toa

Condition: used, OKUMA BLUSHLESS SERVOMOTOR DRIVE UNIT BL-120E-20 Gksdpfxoy Suw Us Ag Tsa

Condition: used, OSP GRAPHIC PANEL 5000 E0105-800-027 The parts were removed from Gjdpsyn R S Eofx Ag Teka production facilities that were in operation until they were decommissioned. Condition: used (functional)

Condition: used, OKUMA POWER SUPPLY 5000T E0451-521-038 Godjy Suyvspfx Ag Toka . 03487

Condition: used, Year of construction: 2001, Technical data: Okuma Space Turn LB 300 MY Year of manufacture: 2001 Control: OSP U 100 L Gkjdjqucnbopfx Ag Toa Max. Turning length: 340 mm Chuck diameter: 10 inch X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360°(0.0001°) Spindle: 4500 rpm Spindle clearance: 62 mm Weight: 6000 kg Accessories: -Driven tools -Chip conveyor -Transformer -Manuals

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Godpfx Agoy Druns Tjka Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details turning diameter 420 mm Gksdpfxszr Hyfs Ag Tja turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor

Condition: ready for operation (used), Year of construction: 2005, operating hours: 31,899 h, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 280 mm, number of axes: 2, This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max diameter of the parts for the table pallet: 160 mm • Max. Turning height: 200 mm Extra Information • Machine still under power / two machines with interlinking available • Single-shift operation for 7 years • Cutting TIME: • 1st machine: 33,594 hours • 2nd machine: 31,899 hours • 3rd machine: 33,863 hours • 4th machine: 34,408 hours • The machines operate in a linked configuration (2 machines per pair, processing on both sides) Technical Specification Gkedpfx Aezt Nvfjg Tja Taper Size VDI 40

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Gkjdpfjzru Ukox Ag Tea Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: used, turning diameter 260 mm turning length 280 mm control OSP500 1. Machine Specifications Item Unit Specification Number of controlled axes – 2 Swing diameter over bed mm Ø 450 Swing diameter over slide mm Ø 350 Swing diameter over cross slide mm Ø 300 Maximum turning diameter × length mm Ø 260 × 280 Spindle diameter mm Ø 100 Spindle nose – JIS A2-6 Godewm Rrdepfx Ag Teka Spindle taper mm Ø 70 × 1/10 Spindle bore mm Ø 62 Spindle speed range rpm 35 – 4,000 Z-axis travel mm 320 Z-axis rapid traverse mm/min 20,000 X-axis travel mm 155 X-axis rapid traverse mm/min 15,000 Turret type – V Number of tools – 8 (optional 12) Tool size (external turning) mm ¦ 25 Tool size (internal turning) mm Ø 40 (optional Ø 32)