Used Multiplex for sale (208)

Condition: good (used), Year of construction: 2005, turning length: 200 mm, turning diameter: 350 mm, Used Mazak Multiplex 6300 Max turning diameter approx. Ø 350 mm Max turning length approx. 200 mm Many fine tools included "Auto operation" hours: 76,300 Gantry loader max. 2 x 40 kg 2 spindles, 2 axes per spindle (X/Z), C-axis, M-spindle Portal load and unload table Rcjdpfjy I Sfuox Adzjf

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Gantry Loader Accessories, tools, and clamping devices shown are only included in the scope of delivery Redpfx Adoyb S Nrozscf if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2005, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2005 Gathering machine: Raccoglitrice-MX - Colour monitor Rodovuzfrepfx Adzocf - Hand feeding station: 2 - Number of gathering stations: 6 - Optical sheet control - Pump(s) - Distribution unit: Cassettiera - Distribution section into the sewing machine Sewing machine (1) Meccanotecnica Aster 180/42 Year: 2005 - Pre-loader - Feeder - Optical sheet control: Opticontrol - 4 + 4 opening possibilities - Plus stacker - Roller table delivery

Year of construction: 2007, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2007 Gathering machine: Raccoglitrice MX Redpfx Adst Sz T Hjzscf - Number of gathering stations: 18 - Optical sheet control - Pump(s) - Distribution unit - Distribution section into 2 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 2007 - Colour monitor - Pre-loader - Optical sheet control - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker Sewing machine (2) Meccanotecnica Aster 2000 Year: 2005 - Pre-loader - Optical sheet control (BAK) - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Redpoxn Aamjfx Adzocf

Condition: used, Multiplex boards used length 1680 mm width 1250 mm board thickness 45 mm weight 68,5 kg Rcjdpfx Adel Uvxnezef in the pallets there are 9 holes with diameter 12 mm several presentseveral present

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 22,000 W, number of axes: 3, This 3-axis Mazak Multiplex 6200 was manufactured in 1999 and features dual spindles with a maximum speed of 5,000 rpm and a drive power of 22/15 kW each. It includes an ABB robot and turrets on both the right and left with 12 tools each. Rapid traverse rates are 30.5 m/min for the X-axis and 33 m/min for the Z-axis. If you are looking to get high-quality turning capabilities consider the Mazak Multiplex 6200 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Right and left turrets: 12 tools each • Axes: 3; including abb robot Redpex Nr S Djfx Adzocf • Main motor: 200 v

Year of construction: 1992, condition: ready for operation (used), Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible. Rodpfjyhgpasx Adzocf

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Rjdpeylp S Eofx Adzscf Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / plywood Coated panel materials The machine is fully operational and ready for use. Viewing possible anytime by appointment. Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: good (used), Year of construction: 2008, turning length: 200 mm, turning diameter: 349 mm, Used Mazak Multiplex 6300Y CNC lathe Max turning diameter approx. 350 mm Max turning length approx. 200 mm Gantry loader max 2 x 40 kilograms 2 spindles, 3 axes per spindle + Y axis, C axis + M spindle Gantry loader, loading magazine, discharge conveyor Rcjdpfx Ajyvgbxjdzsf

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Rodpfx Adoxzgw Aszecf Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Width 29.7 in.

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-260017, The FICEP Tipo G31 sheet metal processing center for the cost-effective processing of steel sheets and flat steel in the steel construction and steel trading industries. The Ficep Tipo G31 LG can drill, center-punch, tap, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting. The CNC-controlled sheet metal processing center is equipped with 2 drilling units, each with 26 kW of drive power. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. This system is suitable for sheet metal sizes: sheet width: minimum 200 mm, maximum 3,100 mm; sheet length: minimum 2,500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma power source is available for plasma cutting. In addition, the system features an oxy-fuel cutting unit for thick materials. Redsznh R Ropfx Adzocf The drilling unit, with high torque and a spindle speed of up to 6,000 rpm, is designed for drilling with carbide tools such as solid carbide drills, Kennametal drilling tools, Nenok Multiplex indexable insert tools, as well as for use with HSS coolant-channel drills with diameters ranging from 10 mm to 40 mm. The Ficep Tipo G31 sheet metal processing center is in very good condition and has only a few operating hours.

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: SIEMENS, overall weight: 1,200 kg, total width: 1,200 mm, total height: 1,900 mm, product length (max.): 2,800 mm, number of axes: 4, This 4-axis WEIRATHER KS1300/4 was manufactured in 2004. It features a maximum milling length of 1300 mm and a milling diameter of 300 mm, making it suitable for various applications such as tool handles and furniture components. The machine operates with a Siemens control system and has a cutter shaft speed of 5300 rpm. If you are looking to get high-quality milling capabilities, consider the WEIRATHER KS1300/4 wood mill we have for sale. Contact us for further details. • Condition: Used • Electrical: 400 V, 50 Hz, 4.0 kW • Number of spindles: 4 • Machining principle: Longitudinal milling • Capabilities: • Max milling length: 1300 mm • Max milling diameter: 300 mm Redpfxjzugubo Adzocf • Max recommended workpiece size: 1300 x 150 mm • Cutter shaft speed: 5300 rpm • Operation/features: Low-vibration, smooth running; high dimensional accuracy and clean surface finish • Lubrication: Automatic central lubrication (reduced maintenance) • Production type: Suitable for series production • Workpiece type: Long and 3D-contoured parts • Material suitability: Hardwood, softwood, multiplex, MDF, selected plastics (with suitable cutters) • Typical applications: • Tool handles, hammer/axe/garden tool handles, walking stick handles • Gun stocks, pistol grips, bow risers • Furniture parts: armrests, back rails, handles, decorative moldings, wooden feet • Balusters, posts, handrail and volute segments • Paddle and oar handles and shafts • Consoles, corbels, decorative supports, sculptural elements • Foundry patterns, gauges, templates, fixture components • Knife and tool handles, pestles, kitchen utensil handles • Certification/conformity: CE marked; EC declaration of conformity available • Test run: Possible under power by appointment • Included: Machine as shown Additional equipment • Optional: Additional milling cutters available • Optional: Additional templates (only if shown or explicitly mentioned)

Year of construction: 2005, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2005 Consisting of Gathering machine: Raccoglitrice MX - Hand feeding station - Number of gathering stations: 12 - Optical sheet control - Pump(s) - Distribution unit: MX Modulo - Colour monitor with touch screen - Distribution section into 2 sewing machines Sewing machine (1) Meccanotecnica Aster 220 SAO - Colour monitor with touch screen - Automatic setting - Pre-loader - Feeder - 4 + 4 opening possibilities - Plus stacker - Excluding pump Sewing machine (2) Meccanotecnica Aster 220 SAO - Colour monitor with touch screen - Automatic setting - Pre-loader - Feeder - 4 + 4 opening possibilities Redpfx Aoyu Sp Sjdzjcf - Book block separator - Plus stacker - Excluding pump Maximum size: 320 x 420 mm Minimum size: 100 x 150 mm Max speed MX gathering machine: 100 cycles/min Max stack height - Plus stacker: 150 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), functionality: fully functional, Like-new, guaranteed heavy-duty basic shelving unit with an electric roller shutter. It has a few minor dents and scratches. Consisting of: - 1x heavy-duty basic shelving unit with 2 column frames with 100% pull-out base, usable depth 950 mm, height: 2000 mm - 2x multi-part side panels, usable depth 950 mm, suitable for shelf height: 2000 mm - 3x shelf panels, 12 mm beech multiplex, for shelf field, usable depth: 950 mm - 1x roller shutter for basic shelving unit, usable depth 1350 mm, suitable for shelf height: 2000 mm New price: €11,019 (gross) The stated price is the gross price. Sale only with invoice and VAT shown. Inspection possible at any time by arrangement. Shipping possible with cost assumption. Rcsdjziwwcjpfx Adzef We can assist with loading using a forklift for self-collection.

Condition: used, This listing is for the Agilent 34970a Data Loger Switch Unit The unit is in full working condition and is ready for immediate use Key Features: 3-slot mainframe: Supports up to 60 2-wire channels using plug-in modules. Built-in 6½-digit DMM (Digital Multimeter): Measures voltage, current, resistance, frequency, and temperature. Plug-in Modules Available: Rcsdpoxhfcdjfx Adzjf e.g. 34901A (20-channel multiplexer), 34902A (16-channel actuator), 34908A (40-channel single-ended multiplexer), etc. Interfaces: GPIB and RS-232 standard (USB via adapter). Logging Capabilities: Can log data over time for test/monitoring applications. Scan Rates: Up to 250 channels/sec depending on configuration. User Interface: Front-panel controls with LCD display. Remote control via SCPI commands. Typical Applications: Environmental monitoring (temperature, humidity) Functional test systems Data logging in labs Automotive and aerospace test setups Industrial process monitoring

Condition: good (used), Manitowoc Multiplex MB-8-1PP slush machine ice cream machine Manitowoc Multiplex MB-8-1 workstation for mixing in a cup. Features: Mix and serve directly in the cup. Improve consistency, control product cost, reduce waste, labor and serving time. Automated features to complete the entire beverage preparation process - right in the cup! Integrated nugget ice machine The integrated nugget ice maker is the perfect ice for all types of specialty drinks and provides high beverage capacity during peak hours. The ice maker meets a large ice demand within 24 hours. Built-in refrigeration for storage and dispensing system. Rodpjpgwh Ajfx Adzscf Exclusive easyToUCH™ control system. User-friendly, icon-based touchscreen control simplifies beverage preparation and inventory management. The control panel provides visual training, cleaning, maintenance and data collection information. With the icon-based easyToUCH™ touchscreen, preparing a beverage is as easy as pressing a button. This intuitive control panel lets you do everything you need to operate the machine - from beverage preparation to training to cleaning. Menu language Dutch Without product holder/drawer Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: used, This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working condition and is ready for immediate release. The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. 0-10V and 4-20mA, with RS232 on PRO & Multiplex Integrates to any reactor size (250ml – 100m3) Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Rcsdexx Aqyspfx Adzsf Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift:

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Rcsdpfx Adexzg Ubszjf Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Year of construction: 2022, condition: used, functionality: fully functional, Thermo Scientific Luminex xMAP INTELLIFLEX System. Year of manufacture: 2022 The Luminex xMAP INTELLIFLEX System is the newest addition to the xMAP line of instruments.The Luminex xMAP INTELLIFLEX System represents the most advanced and versatile multiplexing platform, featuring an embedded PC with a touchscreen interface and a reduced footprint compared to the Luminex 200 and FLEXMAP 3D systems. With automated start up, shut down, and maintenance routines, the Luminex xMAP INTELLIFLEX System is easy to use and maintain, providing fast read times for both 96- and 384-well plate formats. The system is compatible with all Invitrogen ProcartaPlex multiplex immunoassays and Invitrogen QuantiGene Plex multiplex gene expression assays. Features of the Luminex xMAP INTELLIFLEX System include: • Reporter laser (RP1): 532-nm diode-pumped solid-state laser (DPSS); mode of operation, continuous wave (CW); output power varies based on mode with maximum output power of 50 mW Rcedpst Iiklsfx Adzjf • Reporter detector (RP1): photomultiplier tube, detection bandwidth of 565 to 585 nm • Dynamic range (typical): RP1: ≥5.5 logs • Read time: 96-well plate in ∼20 min (up to 144,000 tests/hour); 384-well plate in ∼75 min (up to 153,600 tests/hour) • System warmup time: 30 min • System intialization: ≤45 min • System verification: 5 min • Multiplexing: up to 500 analytes in a single sample (assay-dependent) • Available options: service contracts, IQ/OQ • Integrated PC and integrated barcode reader Good working condition. Please check out our other listings as well.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, smooth exterior walls, side flap Equipment: - 6 lashing eyes - Welded frame - ABS walls Net: €6,121.85 / Gross: €7,285.00 Article number: SPL220301518.33 Rcedpfxszu N Dle Adzef Technical data: • Brand: Hapert Trailers • Model: Sapphire L-2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 300 x 150 x 180 cm • Exterior dimensions (L x W x H): 435 x 198 x 238 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,000 kg • Unladen weight: 663 kg • Payload: 1,337 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/70R13 • Suspension: ALKO/BPW rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor made of multiplex • ABS walls, extremely smooth exterior walls for box construction • Reinforced, securely screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame is very torsionally stiff due to its robust design • 6 lashing eyes recessed inside the side edge (1000 DaN/kg), TÜV certified! • Battery-powered interior light, for free positioning • 2-wing rear door with stainless steel swivel bar closure, lockable • Continuous interior height: approx. 178 cm • Continuous interior width: approx. 142 cm • 2 maneuvering handles in front • Side flap on the right, lockable • Maintenance-free rubber spring axles from ALKO/BPW • Reversing automatic • ALKO/BPW overrunning device and parking brake • Very stable, securely screwed V-drawbar • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Equipment: - 8 lashing eyes - Welded frame - Multiplex walls Net: €6,478.99 / Gross: €7,710.00 Article number: SPL227401818.21 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 400 x 180 x 180 cm • External dimensions (LxWxH): 535 x 228 x 238 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,700 kg • Tare weight: 850 kg • Payload: 1,850 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and walls made of multiplex • Reinforced, securely bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members for high point load • Longitudinal members continuous • Frame very torsion-resistant due to its stable construction • 8 lashing brackets recessed inside the side edge (1000 DaN/kg) TÜV certified! • Battery - interior light, for free positioning • 2-wing rear door with stainless steel swivel latch, lockable • Continuous interior height: approx. 178 cm • Continuous interior width: approx. 172 cm • 2 maneuvering handles at the front • Maintenance-free rubber spring axles from KNOTT • Reversing automatic • KNOTT overrun device and parking brake • Very stable, securely bolted V-drawbar • 13-pole connector • Reversing lights Rcsdpfx Aozu N Scsdzsf • Large dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: -Welded frame -Multiplex walls -4x Lashing eyes Net: €3,907.56 / Gross: €4,650.00 Article number: SPL115251315.22 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-1 Rsdpfxezu N N Ue Adzscf • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 250 x 130 x 150 cm • External dimensions (L x W x H): 385 x 178 x 208 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,500 kg • Unladen weight: 475 kg • Payload: 1,025 kg • Chassis: Low loader (wheels beside the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and multiplex walls • Reinforced, securely screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame is very torsion-resistant due to its stable construction • 6 lashing eyes recessed inside on the side edge (1000DaN/kg), TÜV certified! • Battery-powered interior light, for free positioning • Tailgate with gas struts and non-slip surface • Continuous interior height: approx. 148cm • Continuous interior width: approx. 122cm • 2x maneuvering handles at the front • Maintenance-free rubber spring axles from KNOTT • Reversing automatic • KNOTT inertia coupling and parking brake • Very stable, securely screwed V-drawbar • 13-pole connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair - Workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, side door Equipment: - 6 tie-down points - Welded frame Rcsdpfx Aezu N D Ssdzef - Multiplex walls Net price: €4,873.11 / Gross price: €5,799.00 Article number: SPL115301515.24 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-1 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 300 x 150 x 150 cm • External dimensions (LxWxH): 435 x 198 x 208 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,500 kg • Tare weight: 550 kg • Payload: 950 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and walls made of multiplex • Reinforced, securely screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame very torsion-resistant due to its stable design • 6 recessed tie-down eyes inside on the side edge (1000 DaN/kg), TÜV certified! • Battery-powered interior light for free positioning • 2-wing rear door with stainless steel twist-lock closure, lockable • Continuous interior height: approx. 148 cm • Continuous interior width: approx. 142 cm • 2 maneuvering handles at the front • Side door on the front right with twist-lock closure, lockable from the outside • Size of the side door approx. 147x67 cm • Maintenance-free rubber spring axles from KNOTT • Reverse automatic • KNOTT inertia coupling and parking brake • Very stable, securely screwed V-drawbar • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, Parabolic suspension +100km/h Equipment: - 6 lashing eyes - Electric pump - 5-stage cylinder Net price: €6,588.24 / Gross price: €7,840.00 Article number: CHM235331810.04 Technical data: • Brand: Hapert Trailers • Model: Cobalt HM-2 • Vehicle type: Three-way tipper • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 335 x 180 x 30 cm • External dimensions (LxWxH): 468 x 186 x 99 cm • Loading height of the floor: 69 cm • Permissible total weight: 3,500 kg • Tare weight: 940 kg • Payload: 2,560 kg • Chassis: Low loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Yes DESCRIPTION • New side wall hinges incl. welded-on hooks for attaching, among other things, a cargo net. • Aluminum side walls with robustly installed latches • Aluminum side walls anodized double-walled • All side walls can be folded down and removed • Steel corner posts removable • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side wall attachments or front wall extension • Cargo net hooks on hinge lower parts • Stable eccentric latches • Galvanized steel sheet on multiplex floor panel • Reinforced, stably screwed V-drawbar • Very stable steel frame welded • Frame completely hot-dip galvanized Rcjdpfx Aozu N Tmedzof • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded in • All cross and longitudinal members rest on the floor • 6 lashing eyes recessed inside the side edge (1000DaN/kg) TÜV certified! • U-profile on the rear for easier attachment of the ramps • Ramp shaft prepared • Solid 5-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box incl. cover • Removable remote control for electric hydraulics with spiral cable and battery status display • External battery charging socket for optional 230V charger • Parabolic axle from KNOTT • Shock absorbers for 100km/h installed • Parabolic axle for absolute driving comfort! • Automatic reversing function • KNOTT inertia coupling and parking brake • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to ask about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - dealers & repair - workshops for over 30 years - Errors, omissions and prior sale are reserved -