Used Okuma Lc 50 for sale (229)

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Pgodey Ed Ayepfx Aaask Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Pgsdpfsyxmyuox Aaask Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: ready for operation (used), A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible. Psdpfx Aaeyttwzjaogk

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Pjdpfsxb Awfsx Aaaegk Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0014, turning length: 1,500 mm, turning diameter over cross slide: 610 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel Distances X-axis travel: 598 mm Y-axis travel: 230 mm Z-axis travel: 1,660 mm C-axis: 0.001 Turning Length: 1,500 mm Swing diameter over cross slide: 610 mm Swing diameter: 580 mm Spindle Spindle motor power: 30,000 W Spindle speed (min.): 14 rpm Spindle speed (max.): 3,200 rpm Spindle bore: 90 mm Spindle bearing diameter: 130 mm Spindle nose: JIS A2-11 Rapid Traverse Rapid traverse (Z-axis): 20 m/min Rapid traverse (X/Y): 12,000 mm/min Rapid traverse (C): 100 min^-1 Cutting feed rate X/Z/Y: 0.001 - 1,000 mm/rev Tools Tool magazine positions: 32 pos. Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Turret type: H2 ATC Tool stations: 2 (1x L-Tool / 1x M-Tool) Pedpfx Aajxqyikjasgk Driven tool stations: stepless Spindle speed – driven tool stations: 40 - 3,000 rpm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Centre taper: MT 5 MACHINE DETAILS CNC Control: OSP 7000L Total power requirement: 53 kVA Dimensions & Weight Dimensions (L x W x H): 5.3 x 3.2 x 3.0 m Machine weight: 18,500 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), operating hours: 13,245 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, table load: 800 kg, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Travel Range X: 700 mm Travel Range Y: 800 mm Travel Range Z: 700 mm Table Size: 500 mm × 500 mm Rotary Table: indexed in 1° increments, 360 positions Table Load Capacity: 800 kg Spindle Speed: 5,000 rpm Distance Spindle Nose to Table Surface: 150 mm – 850 mm Tool Holder: BT 50 Tool Magazine (ATC): 60 stations, chain magazine Maximum Tool Length: 450 mm Pgedpfjxghcdex Aaajk MACHINE DETAILS Control: CNC OSP U100M Dimensions & Weight Machine Weight: 21,000 kg Dimensions (L x W x H): 5,500 x 3,160 x 3,300 mm Operating Hours Spindle Hours: 13,245 h Power-On Hours: 27,372 h EQUIPMENT Chip conveyor Table-mounted Tool Presetter 2 tables with MAS bores for clamping

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne Pgjdpfxoh D Anao Aaaek documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 1,670 mm, travel distance Y-axis: 505 mm, travel distance Z-axis: 190 mm, total height: 2,950 mm, total width: 2,960 mm, overall weight: 13,700 kg, product length (max.): 5,110 mm, number of axes: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, Helical Interpolation • Distance between centers: 1500 mm • Max swing diameter over covers: 550 mm • Max turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" Big Bore • Sub-spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with motorized tools • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 divisions • Coolant/pump pressure: 15 bar Podsy Ddiwepfx Aaaegk • Working hours (as provided): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled Pgsdpfoyt Nvtsx Aaask - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Internal machine no.: 27 Max. turning length: 950 mm Max. turning diameter: 340 mm Max. swing diameter over cross slide: 380 mm Max. swing diameter over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder interface: BMT 2 pcs. tool turrets Pedpfjyluvijx Aaajgk A turret: 12 tool positions (all driven) B turret: 8 tool positions Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touch setter High-pressure coolant pump Enlarged coolant tank

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Pgjdpfx Aeyk Uimoaajk Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 21 Turning length: 750 mm Turning diameter: 430 mm Podpfsylkgqsx Aaajgk Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 5,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS 2x Pallets 500 x 500 mm Travel distances X: 700 mm, Y: 800 mm, Z: 700 mm Table size: 500 mm x 500 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Table load capacity: 800 kg Spindle speed: 5,000 rpm Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Maximum tool length: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Machine weight: 21,000 kg Pgsdpfx Asyrgzkeaajk Dimensions (L x W x H): 5,500 x 3,160 x 3,300 mm Spindle hours: 18,500 EQUIPMENT Chip conveyor, coolant system, and pocket filter system for internal cooling

Condition: good (used), Year of construction: 1998, functionality: fully functional, OKUMA LCC15, OSP 700L, collet chuck, chip conveyor, coolant pump, touch setter, chip conveyor, parts catcher, V12 turret direct mounting. A very compact and efficient machine for bar stock workpieces. * The LNS bar feeder is included free of charge with the machine, but it is not part of the sale and must be electronically serviced by an LNS technician. Pgedpfx Aoyq S E Soaaok

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Pgsdpfx Aajvta Sboaek Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 22 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1250 / 660 / 540 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 32 [mm/min] - Cutting feed rates (X/Y/Z) : 32 [m/min] A ROTARY AXIS - Travel : [°] - C ROTARY AXIS - Speed : 1000 [rpm] - Travel : 360 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 48 TABLE - Maximum workpiece diameter : 730 x 500 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 127 - 660 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.940 x 3.367 [mm] - Machine height : 3.541 [mm] - Machine weight : 13.000 [kg] MACHINE HOURS - Number of hours under power : 57.114 [h] - Number of working hours : 23.087 [h] EQUIPMENT - CNC : OSP-P200M - Turning option - Coolant tank * with paper filtering unit Pjdpfx Aajy Er Hyoajgk - Coolant through spindle - Chips conveyor - Oil mist extractor : LOSMA - Spindle cooling unit - Tool probe : RENISHAW TS27R - Workpiece probe : RENISHAW OMP60

Condition: used, Year of construction: 2014, Technical details: Pgsdpfxoxrwpde Aaaek x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80-position tool magazine, main spindle with C axis, sub spindle with C axis, Y-axis upper slide/milling spindle, HSK 63 tool holder, infinitely variable B axis as milling spindle, center distance 1500 mm, spindle bore 80 mm, max. swing diameter 550 mm, turning diameter 350 mm, lower turret with 12 stations and driven tools, Interlite compact filter system 900 l, extraction system, spindle operating hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Pedpfx Aaoy Atu Tsasgk

Condition: excellent (used), Travels: X-axis: 155 mm Z-axis: 320 mm Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Pjdpfxeyvy Uto Aaaegk Tool turret: 12 stations Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Pjdexzgkijpfx Aaaogk Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Psdpexzi D Sofx Aaasgk Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: used, OSP GRAPHIC PANEL 5000 E0105-800-027 Psdpfxeyn R S Ee Aaajgk The parts were removed from production facilities that were in operation until they were decommissioned. Condition: used (functional)

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, total height: 2,864 mm, overall weight: 11,500 kg, spindle speed (max.): 15,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine. • Spindle center to pallet top: 50–810 mm • Spindle nose to pallet center: 135–895 mm • Table/pallet: 500 × 500 mm; max load 500 kg; indexing 1° • Workpiece capacity: max Ø800 × 1,000 mm • cutting feed 1–60,000 mm/min; table indexing motor 3.0 kW • Tooling: tool shank MAS403/BT40; pull stud MAS 2; magazine 64 tools; random selection • floor space 2,700 × 4,710 mm Pjdpfxsx D Rrco Aaaegk Additional equipment • Chip conveyor • Through-spindle coolant (CTS) • Tool presetting at table edge • Provision for Renishaw probe • Shower/washdown system

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300 S-H Year of manufacture: 2014 Spindle hours: approx. 2,050 h Travels: X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Spindle mounting: HSK 63 Total tool stations: 40 Accessories: XA and YA axes equipped with direct absolute measuring system (Okuma ABSO-Scale) In-process measurement with Renishaw probe for X/Z axes Measurement in Y-axis including angled axis measurement Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Kitagawa F 2596-H01 hollow chuck cylinder Ø96 mm One-Touch IGF Multi-function tool software Pgodoyk Tq Aopfx Aaaek Harmonic spindle speed vibration control Simultaneous 5-axis machining software package Chip conveyor Coolant tank with 70 bar high-pressure pump

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools Pgedpoyviigefx Aaaok ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°