Used Okuma for sale (227)

Condition: used, Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible. Nljdpfx Akoz E Nq Roish

Condition: used, OKUMA BLUSHLESS SERVOMOTOR DRIVE UNIT BL-120E-20 Nlsdey Suw Uepfx Akioh

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, In excellent condition, fully functional. Nlsdpj Afi Ebsfx Akijh

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0154, One of my clients is looking to sell his Okuma LB25-M lathe with powered tools, as he prefers to use Mazak machines in the future. Neds Afpp Hopfx Akiolh - Machine: Okuma LB25-M - Equipment: Powered tools - Condition: Good - Status: Still in production - Price: €25,000 - Location: Weyerbusch near Altenkirchen, Germany The machine can be inspected on site by appointment.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * High metal removal rate machine. * Box guideways on all axes. * Quadruple box guideway system on the Y-axis. * Extremely rigid structure. * Oil-fed guideway lubrication system with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * High-torque 18.5 kW motor. * Cutting torque: 580 Nm. * Chip evacuation capacity: 540 cm³/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool usage monitoring. * Parametric automatic tool anti-collision system. * Communication ports: USB, PCMCIA card, and RS-232. * Tool life management and usage tracking. * Automatic control of torque and tool stress. * Table dimensions: 2,200 x 850 mm. * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. Nljdpfx Aoz Sx Rhjkioh * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * 36-tool magazine. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system (70 bar pressure). * 30-micron particulate filter system. * LTA mist filtration system. * Rear-mounted hinge-type chip conveyors. * Machine currently in production. * Inspectable by a qualified official Okuma technician. * Condition: Like new. * Extensive BT 50 tooling/holder package. * Includes electrical transformer, documentation, parts list, electrical schematics, and programming/operation manuals. * Machine weight: 20,500 kg. * Immediate delivery available (subject to prior sale).

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Equipment: documentation/manual, Vertical turning center equipped with live tooling (M-specification), C-axis and an automatic loading/unloading system for efficient serial production. The machine is fitted with a 12-station turret, hydraulic chuck, chip conveyor and integrated automation. Technical Data - Max. turning diameter: Ø280 mm Neds Ady I Repfx Akijlh - Max. turning length: 200 mm - Spindle speed: 40-4,000 rpm - Through-spindle bore: Ø62 mm - Live tooling speed: 45-4,500 rpm - C-axis with 0.001° indexing - 12-position V12 turret - Spindle motor: 22/15 kW (peak/continuous) Operating Hours - Power-on time: 27,694 h - NC run time: 9,703 h - Spindle time: 8,888 h - Cutting time: 7,515 h Equipment - Live tooling - C-axis - Hydraulic chuck - Automatic loading/unloading system - Parts handling conveyor - Chip conveyor - Full enclosure Machine is in good working condition and can be inspected under power by appointment.

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Nsdpfx Ajwzzrkekislh

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with driven tools, a parts handling arm, an eye for automatic tool referencing, a chip conveyor, and a material feeder. Commissioned in 11/2014 OSP-P300L CNC control system with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of March 18, 2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours Continuously increasing. Power consumption: 33.1 kVA Technical data Max. swing diameter: 480 mm (approx. depending on the current design of the parts handling arm) Max. machining diameter: 340 mm Max. turning length: 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 connection, 80 mm bore, integrated motor Speed range: 45 - 5,000 min.-1 Power/continuous operation: 22 kW/15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 min-1 Power/continuous operation: 11 kW/7.5 kW Spindle with 140 mm connection, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub spindle travel – NC axis W, travel for W450: 595 mm Spring-loaded part ejector from the sub spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub spindle Turret Number of tool stations: 12, fixed and driven, BMT60 (not VDI) Tool shank diameter: 25 x 25 mm Tool shank outer diameter: 40 mm Driven tools Drive power: 7.1/4.1 kW Speed range: 45 – 6,000 min.-1 Feed rates Rapid traverse in X and Z axes: 25/30 m/min. Rapid traverse in C axis: 200 rpm Travel X-axis: 260 mm Z-axis: 510 mm Y-axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3330 mm – without feeder and conveyor Depth: 1800 mm Nleds Abw U Aepfx Akioh Height: 2250 mm Machine weight: 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF Where N Hwxez Hk R Ue Nou 3D machining process simulation Machining time overrun control Load monitoring (spindle, feed axes) NC operation monitoring (including part count) Cycle time reduction function Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Material feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction system Machine equipment: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm): 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial tool holder - 5X Turning tool holder - 5x Boring bar holder - 2X Front steady rest, double-sided - 3X Rear steady rest - 3X Reduction sleeve (manufactured from stock material) Reduction - nylon, diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 810 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 900 mm, workpiece weight (max.): 1,200 kg, total height: 3,291 mm, total length: 5,412 mm, total width: 3,760 mm, table width: 630 mm, table length: 630 mm, overall weight: 24,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 13,450 h, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MA-60HA horizontal CNC machining centre, manufactured in 2000 and equipped with an Okuma OSP-U100M CNC control system. The machine is in very good condition and features a high-speed spindle with a maximum speed of 12,000 rpm and a BT40 tool interface. Nljdpfj Ady Iwjx Akijh The machine is equipped with a two-pallet system with 630 × 630 mm pallets, a 60-position tool magazine, and a Mayfran ConSep 2000 chip conveyor. The sale also includes more than 80 tools and tool holders, providing a comprehensive tooling package for the new owner. With its high-speed spindle, dual-pallet configuration and extensive tooling package, this Okuma MA-60HA is an attractive opportunity for manufacturers looking for a horizontal machining centre. Technical Specifications Manufacturer: Okuma Model: MA-60HA Year of manufacture: 2000 Machine type: Horizontal CNC machining centre CNC control: Okuma OSP-U100M Condition: Very good Maximum spindle speed: 12,000 rpm Tool interface: BT40 X-axis travel: 1,000 mm Y-axis travel: 800 mm Z-axis travel: 810 mm 4th Axis / Rotary Table Rotary table positioning: 360,000 positions Indexing resolution: 0.001° Pallet system: 2 pallets Pallet dimensions: 630 × 630 mm Tool magazine capacity: 60 positions Manufacturer: Okuma Motor type: VAC-MOTOR Type designation: VAC-YMB15/11-6.5/120-A Peak output: 18/42 kW 30-minute rated output: 15/15 kW Continuous rated output: 11/11 kW Via nameplate. Included Equipment Okuma OSP-U100M CNC control system High-speed spindle, up to 12,000 rpm BT40 tool interface Two pallets, 630 × 630 mm 60-position tool magazine More than 80 tools and tool holders Mayfran ConSep 2000 chip conveyor Operating Hours Power-on time: 32,500 hours Control power-on time: 15,340 hours Spindle rotation time: 13,450 hours Cutting time: 11,220 hours Inspection can be arranged by appointment.

Condition: good (used), Year of construction: 2016, operating hours: 36,629 h, functionality: fully functional, machine/vehicle number: 196091, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 560 mm, feed length Y-axis: 560 mm, feed length Z-axis: 625 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Okuma, controller model: OSP-P300M, workpiece weight (max.): 400 kg, total height: 2,650 mm, total length: 4,700 mm, total width: 2,420 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, overall weight: 9,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 22,704 h, coolant supply: 50 bar, spindle motor power: 26,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a used Okuma MB-4000H, a 4-axis CNC horizontal machining center, manufactured in 2016 (produced in June 2016), in good condition. Manufacturer: Okuma Model: MB-4000H Serial number: 196091 Year of manufacture: 2016 Condition: used, good condition Key specifications: - CNC control: Okuma OSP-P300M - X/Y/Z travels: 560 / 560 / 625 mm - 2 pallets, 400 x 400 mm, with automatic pallet changer - Maximum pallet load: 400 kg - B-axis: NC table with 0.001° indexing - Spindle: BT40, 15,000 rpm, power 26 / 18.5 kW (30 min / continuous) - Rapid traverse rates X/Y/Z: 60 m/min Nedo Ad Rclepfx Akijlh - Automatic tool changer with 60 positions - Coolant through spindle with high-pressure pump - Tool wear/breakage monitoring probe - Power supply: 400 V - 3-phase - 50 Hz, 42 kVA - Approximate weight: 9,500 kg; approximate footprint: 2,420 x 4,700 x 2,650 mm Machine hours recorded (09/29/2026): - CNC on: 45,737 h - Operating: 36,629 h - Cutting time: 17,380 h - Spindle active: 22,704 h Accessories, tools, and tool holders: to be agreed upon. Complete technical data sheet with photos available upon request. Available for viewing by appointment. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2005, operating hours: 33,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100, table width: 500 mm, table length: 500 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Horizontal machining center Okuma MB 500H with a 2-position pallet changer Year of manufacture: 2005 Control system: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 rpm Nodpez Tc Uysfx Akielh Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant pressure: 70 bar Travel distances: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Pallet size: 500x500 mm Accessories: - Coolant system, type ConSep 2000, by Mayfran - Chip conveyor, type ConSep, by Mayfran - Tool breakage monitoring in the magazine - Workpiece coolant shower

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Nlsdpfx Akswcd Evjieh Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, We offer this used Okuma LB300 CNC lathe, manufactured in 2001. Manufacturer: Okuma Model: LB300 Year of manufacture: 2001 The condition is very good and meets the manufacturer's specifications. The machine is operational in our CNC turning shop and can be inspected at any time. All machines are under the manufacturer's service agreement. Last service in 2026. The following accessories will be included in the sale: Chip conveyor Extraction system Tool holder (available at an additional cost, negotiable) Nlsdpfx Aoz Rv Rvokish The machine is available for immediate delivery after consultation. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Nledpfx Akozi Ihfsioh Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Nljdpfx Akj Aa Aufsish Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,250 mm, turning diameter: 620 mm, spindle bore: 120 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,275 mm, spindle motor power: 22 W, total height: 1,925 mm, total length: 3,980 mm, total width: 1,880 mm, overall weight: 7,600 kg, bar passage: 80 mm, spindle nose: JIS-A2-8, Equipment: documentation/manual, OKUMA SPACE TURN LB400-M – CNC TURNING CENTER OKUMA SPACE TURN LB400-M – a robust and powerful Japanese CNC turning and milling center designed for precision machining and series production of metal components. The machine is built on the proven OKUMA platform and offers high rigidity, reliability, and excellent performance for demanding CNC turning applications. The LB400-M version is equipped with driven tools and a C-axis, making it suitable for complex machining operations and allowing multiple machining processes to be completed on a single machine. MACHINE DATA Manufacturer: OKUMA Model: SPACE TURN LB400-M Type: CNC Turning & Milling Center Machine type: CNC Lathe / CNC Turning Center CNC Control: OKUMA OSP Number of axes: 2 + C-axis Nsdezwdw Eopfx Akijlh Turret: 12-position turret Driven tools: Yes C-axis: Yes Hydraulic chuck: Yes Coolant system: Yes Chip conveyor: [YES / NO] Tailstock: [YES / NO] Condition: Used / Good working condition MAIN FEATURES Robust Japanese OKUMA construction CNC turning and milling capability C-axis for complex machining operations Driven tooling 12-position automatic turret Hydraulic chuck High rigidity and stability Suitable for both single-part and series production Excellent machine platform for heavy-duty turning applications Machine available for inspection and testing The machine has a 3-year-old refurbished main spindle and X-axis.

Year of construction: 2018, condition: used, Control system Okuma OSP P300L (OSP Suite, 15") MACHINE Number of axes: 2 Max swing over bed: Ø670 mm Max swing over cross slide: Ø480 mm Max turning length: 1500 mm Max turning diameter: Ø480 mm SPINDLE Spindle diameter, front bearing: Ø140 mm Spindle bore: Ø91 mm Spindle nose: JIS A2-8 Speed range: 42–4200 rpm Nedpfx Ae Aa At Iskielh Front spindle bearings: Roller bearings, axial angular contact ball bearings Torque: 700 Nm Spindle material: CrMo X-AXIS Travel: 300 mm Rapid traverse: 25 m/min Z-AXIS Travel: 1590 mm Rapid traverse: 30 m/min TURRET Type: V12, NC turret Number of tools: 12 Indexing time: 0.24 s/station Tool mounting: MQ TAILSTOCK Quill diameter: Ø100 mm Stroke: 1530 mm Taper: MT No. 5 MOTORS Spindle motor: PREX 30/22 kW (30 min/cont.) X-axis: BL 3.5 kW Z-axis: BL 4.6 kW MACHINE DIMENSIONS Height: approx. 2200 mm Floor space: approx. 4200 × 2400 mm Weight: approx. 8500 kg (standard machine) STANDARD EQUIPMENT - MQ turret, 12 stations (excl. tool holders) NC-controlled tailstock MT No. 5, live center MT No. 4 Coolant system with high-pressure pump Work light Fully enclosed chip and splash guard Chuck open/close via M-code and foot pedal ("double type") Manual Touch Setter Central lubrication (monitoring type B-1) Hand tools Built to IEC standard incl. CE marking and EMC - Conversational programming One Touch IGF-ME kit INCLUDED OPTIONS Spindle orientation Cutting load monitoring "Load monitor" for all axes and spindles Automatic door C1500, left + right Shower/flush coolant type B (M-code) Air blow for chuck and tailstock (quill) Hydraulic quill movement 60 mm, built-in quill MT No. 4 - Prepared extraction port - Absoscale for X- and Z-axis Turcuite for X- and Z-axis incl. "0.1 micron control" Steady rest SMW-Autoblok SLU-X 3.1 Ø20–165 mm with automatic tow-along positioning Grundfos pump 12 bar CR1-9 Cromar chip conveyor (hinged belt), chip discharge to the right

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP E100M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 3,280 mm, total length: 6,495 mm, total width: 3,460 mm, table width: 630 mm, table length: 630 mm, overall weight: 26,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, We are pleased to offer this very well-maintained Okuma MA-600HB horizontal machining centre. The machine was manufactured in 2004 and is fitted with the OSP E100M control system. Technical specifications: Pallet table size: 630 x 630 mm Number of pallets: 2 Table load: 1200 kg Movement X-axis: 1000 mm Movement Y-axis : 950 mm Movement Z-axis : 1000 mm Table indexing: 360 x1 ° Spindle Taper: MAS BT50 Spindle speed: 12.000 1/min Spindle motor: 37/26 kW Magazin capacity: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. Njdpfxoz Tq Tko Akielh

Condition: excellent (used), Year of construction: 2012, Description Specification Manufacturer TATUNG-OKUMA Model GENOS L300E-M Nsdpfx Akez Nyvteiolh Manufacturing Date 30 January 2012 Serial Number PEA258 CNC Control OKUMA OSP P200LA-R MCS3 Machine Type CNC Turning Centre with Driven Tools CE Declaration of Conformity Available Tool Turret 12 Stations Tailstock Included Parts Catcher Listed in machine documentation Bar Feeder Interface Listed in machine documentation 2. Machining Capacity Description Specification Maximum Turning Diameter Ø300 mm Maximum Turning Length 1,060 mm Maximum Swing Over Bed Ø520 mm X-Axis Travel 235 mm Z-Axis Travel 1,144 mm Main Spindle Speed 30–3,000 rpm Spindle Nose A2-8 Main Spindle Motor Power 11 / 7.5 kW (30 min / continuous) 3. Turret and Driven Tools Description Specification Tool Turret 12 Stations Turret Type M-V12 Driven Tool Capability Yes Driven Tool Speed 45–4,500 rpm Driven Tool Motor Power 7 / 3.3 kW C-Axis 360° C-Axis Indexing Resolution 0.001° 4. Equipment and Features - OKUMA OSP P200LA-R CNC control system - 12-station tool turret - Driven tooling capability for milling and drilling operations - C-axis positioning - Tailstock - Parts catcher (indicated in documentation)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-axis CNC turning and milling center Okuma Multus B550-C 2000 Control: OSP-P300SA-H Year of manufacture: 2019 Internal machine number: 71 Travel distances: X-axis: 925 mm Y-axis: 520 mm Nlodpfxjzwulye Akieh Z-axis: 2,215 mm Distance between centers: 2,000 mm Turning diameter over bed: 830 mm Spindle bore: 112 mm Tool holder HSK-A100 40-position tool changer Programmable steady rest with hydraulic quill Equipment - Chip conveyor Interlit ISF - Full-stroke cylinder - 6-jaw power chuck SMW Ø 500 IEP - Manual rinsing gun - Drum – trough filter TMF300/980/20 - IFS filter system IFE 5000 - Robot interface Type E - One Touch IGF - Software for input resolution of 0.1 µm - Software package for simultaneous 5-axis machining VTM-1200YB and VTM-2000YB - In-process measurement with Renishaw measuring probe for X/Z/C axis - Automatic zero point adjustment in the Z-axis of the main spindle - High-precision C-axis - Turning function for NC B-axis - Interpolation turning with the X/C/Z axes

Condition: excellent (used), Year of construction: 2007, Control system OSP P 200L Nledpjz Hwmcsfx Akish Swing over bed 530 mm Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12 VDI 40 Driven tool speed 4,500 rpm Driven tool power 5.5/3.3 kW Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: used, Year of construction: 2003, functionality: fully functional, For sale: OKUMA MB-500H CNC Horizontal Machining Center Year of manufacture: 2003 Reliable and robust Japanese horizontal machining center equipped with an automatic 2-pallet changer, through-spindle coolant, and chip conveyor. The machine is in working condition and can be inspected under power at our facility in Croatia. TECHNICAL DATA Manufacturer: OKUMA Model: MB-500H Year: 2003 Machine type: CNC Horizontal Machining Center CNC control: OKUMA OSP WORKING AREA X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Distance from pallet surface to spindle center: 70 – 870 mm Distance from pallet center to spindle nose: 150 – 950 mm PALLET / TABLE Number of pallets: 2 Pallet size: 500 × 500 mm Maximum pallet load: 500 kg Pallet changer: Automatic rotary pallet changer (APC) Table indexing: 1° Pallet surface: 24 × M16 tapped holes The automatic 2-pallet system allows the next workpiece to be set up while the machine is running, significantly reducing non-productive setup time. SPINDLE Spindle speed: 50 – 15,000 rpm Spindle taper: SK40 / MAS 403 SK40 Nedjzxq Itopfx Akiolh Spindle motor power: 26 kW / 18.5 kW continuous Spindle bearing diameter: Ø70 mm Through-spindle coolant (TSC) AUTOMATIC TOOL CHANGER Magazine capacity: 40 tools Tool holder: MAS SK40 Tool selection: Memory random Maximum tool diameter: Ø75 mm Maximum tool diameter without adjacent tools: Ø145 mm Maximum tool length: 350 mm Maximum tool weight: 8 kg FEED RATES Rapid traverse: up to 90 m/min Cutting feed rate: 1 – 60,000 mm/min EQUIPMENT Automatic 2-pallet changer (APC) 2 × 500 × 500 mm pallets Through-spindle coolant (TSC) Chip conveyor Automatic tool changer 40-tool magazine BT40 spindle Full machine enclosure Coolant system CONDITION The machine has been used in our own production and has been regularly maintained. Machine is fully operational and can be inspected under power. Location: Croatia Inspection and test run are possible by appointment. Additional photos, videos, and information are available on request. Loading/transport can be discussed separately. Price: on request / negotiable

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe Okuma LB 3000 EX II-MY C 450 Control system: OSP-300LA Year of manufacture: 2018 Internal machine number: 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm Travel in X-axis: 260 mm Travel in Y-axis: 120 mm Travel in Z-axis: 510 mm Travel in C-axis: 360 mm Max. turning diameter: 340 mm Max. turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: - Chip conveyor Nedsz D Tt Tepfx Akiolh - One-touch IGF - Touch setter - Main spindle Kitagawa B210 - Coolant system

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC turning machine Okuma LU 3000 EX-M2SC 1000 Control system: OSP-P300LA Year of manufacture: 2022 Internal machine number: 66 Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed: 5 - 5,000 rpm Tool shank: VDI 40 2 tool turrets Nljdpfxszwl Aie Akish A-turret: 12 tool positions / all positions powered B-turret: 8 tool positions - Tailstock - Hinged-belt chip conveyor - 3-jaw chuck Kitagawa B-212 Z220, bore in the chuck Ø 91 mm - Touch setter - One Touch IGF - Handwheel on the control panel - Tool monitoring system - Reinforced coolant pump, 8 bar

Condition: used, Year of construction: 2015, overall weight: 5,500 kg, OKUMA OSP-P300L-R control unit, with TOP AUTOMAZIONI XFS370 bar feed system. Workholding and tooling are not included. AVAILABLE IN NOVEMBER 2026. Nodszxrx Tjpfx Akielh