Used Oku for sale (292)

Condition: new, Year of construction: 2025, Technical data: Suction capacity 510 l/min. Filling capacity 400 l/min. Maximum pressure 10 bar Tank capacity 90 l Cylinder/stages 2/1 Speed 1.300 min/1 Motor power 3 kW/ 400 V Description: The universal with V-belt drive and qualitative equipment especially suitable for craftsmen for use where compressed air quality, durability and efficiency are essential long life thanks to high performance low speed units safe transport and excellent stability thanks to large wheels with parking brake Optimum cooling thanks to large fan impeller aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air better efficiency due to optimised aggregates Nkedpfx Agohk Dfkoneu Standard with: Condor pressure switch Pressure gauge Pressure reducer with water separator and Rectus quick coupling Motor with overload protection Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, Nksdpfxju Agzxe Agnju weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale,

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg Nedjutmw Hjpfx Agneku - available by arrangement -

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Universal piston compressors with belt drive and high-quality features. Pressure vessel manufactured according to German AD 2000 regulations. Nodsr Ig Ahjpfx Agneku Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, Machine type: Horizontal Machining Center Manufacturer: Okuma Model: MA-40HA Year of manufacture: 2001 Control: OSP-U100M Spindle hours: 21,478 Country of origin: Japan Delivery time: ex-stock • In excellent condition! • Well maintained! • Immediately ready for operation! Machine Equipment - Number of axes: 4 - Spindle speed: 15,000 rpm - Touch setter (tool breakage control and tool measurement) - 2-pallet automatic pallet changer (APC) - ATC magazine with 60 tool positions - Through-spindle coolant (cooling system), bag filter system 20 bar - Signal tower - Chip conveyor Technical Data - Travels X-axis 560 mm Y-axis 610 mm Z-axis 560 mm Spindle center to pallet surface 50~660 mm Spindle nose to pallet center 150~710 mm - Table Pallet size: 400 x 400 mm Max. load capacity: 400 kg Max. workpiece size: 600 x 710 mm Indexing time 2.3 sec. (90°), 3.0 sec. (180°) - Spindle BT40 Bearing diameter: 70 mm Speed: 15,000 rpm - Feed rate (X, Y, Z) 40,000 mm/min - Motor Spindle: 15/11 kW - ATC Magazine capacity: 60 tools Tool type: BT40 Max. tool length: 300 mm Nkedeycguxepfx Agnou Max. tool weight: 10 kg - APC Pallet changer: 2-station Pallet change time: 7 sec. - Power 45 kVA Machine dimensions: approx. 2,480 x 4,164 mm Machine height: approx. 2,720 mm Weight: approx. 10,000 kg Optional Transport organization and execution Machine installation and setup Machine commissioning and handover ready for production

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW Nksdpfxox I Nbte Agnju ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Chip conveyor Nedex Tvgajpfx Agnsku Approx. 40 toolholders BT 50

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis Nksdpfxoxmirgo Agnou - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP-P200L Njdpsx D Nf Iofx Agnsku This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Movement Njdpfx Agjx D Nf Uoneku X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2007. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,810 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 1,144 mm, rotational speed (max.): 4,500 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 300 mm Spindle bore: 68 mm X-axis travel: 235 mm Z-axis travel: 1,144 mm Turret: 12 stations – all driven Spindle speed: 45 – 4,500 rpm Tool holder: VDI 40 MACHINE DETAILS Power-on time: 33,509 h NC run time: 10,810 h Spindle run time: 9,643 h Nsdex Exqfopfx Agnsku Control: OSP P300L-R Weight: 6,300 kg Required footprint: 3.55 m x 2.35 m x 1.93 m EQUIPMENT Chip conveyor Chuck (diameter: 250 mm) Touch setter Tailstock

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100277, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Nksdpox I Axrofx Agnju Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Spindle speed: 4,500 rpm Spindle bore: 62 mm Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Weight: 6,000 kg EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system Nodpfx Agorfw Nheneku OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: new, Power 15 KW Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 ber of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238 Nkjdpevwfhcsfx Agneu

Condition: new, Description: The universal model with V-belt drive and high-quality features, especially suitable for craftsmen, designed for use where air quality, durability, and efficiency are essential. Long service life thanks to high-performance units with low speed, safe transport and excellent stability due to large wheels with parking brake. Optimal cooling provided by a large fan wheel, aftercooler with cooling fins ensures low tank entry temperature and thus less moisture in the compressed air. Improved efficiency through optimized compressor units. Standard features include Condor pressure switch, manometer, pressure reducer with water separator, and quick coupling, motor with overload protection. Technical data: Njdsxnqybspfx Agneku Intake capacity: 650 l/min Filling capacity: 520 l/min Max pressure: 10 bar Tank capacity: 90 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW / 400 V

Condition: new, p 450 ax for panel materials including: Programmable sawblade height adjustment Programmable sawblade pivot adjustment Programmable parallel stop adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP General features of the p 450: Sliding carriage made of anodized aluminum, including high-precision guide made of hardened and ground steel Sliding carriage lock in any position Sawblade guard with pivoting mechanism Extension arm with adjustable angle stop with length compensation at 10°, 15°, 22.5°, 30°, 45°, and 90° Belt adjustment for speed changes from above (opening in the saw table) Display for the set sawblade speed Electrical system and safety devices in accordance with CE standards Technical specifications Specifications: Sawblade tilt: 0° to 45° Nodewl N Twopfx Agnsku Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at the parallel stop: 1,100 mm Max. cutting height with a 450 mm sawblade: 90°: 155 mm / 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP 2 extraction nozzles Extendable angle stop to 3,600 mm

Condition: new, Description: High-performance cast iron cylinder unit V-belt drive Standard features include pressure switch, manometer, pressure regulator and quick couplings, motor with overload protection, equipped with Condor pressure switch Safe transport and excellent stability thanks to large wheels and a rubber foot Optimal cooling provided by a large fan wheel Aftercooler with cooling fins Technical data: Suction capacity 365 l/min Filling capacity approx. 285 l/min Max. pressure 10 bar Tank volume 50 l Nkedpfsxnqxqex Agnou Cylinders/stages 2/1 Speed 1,375 min⁻1 Motor output 2.2 kW / 400 V

Condition: new, Description: The universal model with V-belt drive and high-quality equipment, specifically suited for craftsmen, designed for use where air quality, durability, and efficiency are essential. Long service life thanks to high-performance units with low rotational speed, safe transport and excellent stability due to large wheels with parking brake. Optimal cooling through a large fan wheel; aftercooler with cooling fins ensures low tank entry temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include Condor pressure switch, pressure gauge, pressure regulator with water separator, and quick coupling. The motor is equipped with overload protection. Technical specifications: Intake capacity: 510 l/min Filling capacity: 400 l/min Max. pressure: 10 bar Tank capacity: 90 l Nkodjxnqxwepfx Agnou Cylinders/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V

Condition: new, Main motor with 7.0 kW (S6) and automatic star-delta switching Reverse rotation direction with electrical interlock during switching Fixed milling fence with aluminum rulers (version with electrical safety devices) complete with extraction hood (max. tool diameter 240 mm) Interchangeable milling spindle Controls on the front side Electrically adjustable spindle height and tilt Electrical pre-wiring for power feed unit (CE version) with table extension: 2,500 x 1,200 mm (length/width of milling table, incl. extension and workpiece support) Operating hours counter Technical data: Power 7 kW Working table dimensions (extendable workpiece support) 2500 x 855 mm (1200 mm x 855 mm) Spindle diameter 30 mm Spindle tilt 0-45° Spindle clamping length 90 mm Nodpexnqx Dofx Agnjku Tool diameter under table 240 mm Spindle base protrusion from table 38 mm Spindle speeds 3500/6000/8000/10,000 rpm Extraction port diameter 120/120 mm

Condition: ready for operation (used), Okuma DC-S1A DC Power Supply 4 Axes CZ-270C , serial no. according to photo ,used, normal signs of use, 100% functional Nedoi Ecanjpfx Agnsku

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Njdpfx Aji Ecarognjku

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Nodpfxji Ecaye Agneku

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-100 , serial no. according to photo ,used, normal signs of wear, 100% functional Nedpei Ecacjfx Agnjku

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-102 , serial no. according to photo ,used, normal signs of wear, 100% functional Nodpfxoi Ecago Agnoku

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A / 1911-1509-44-90, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Nodpei Eca Dsfx Agneku